This section summarises the main points when completing a
wash cycle. For detailed explanations of features, options and
details of the machine refer to the relevant section in the
instruction manual.
Preparing the laundry
Select and sort the laundry according to the wash care labels
found on each garment. Always check the care labels.
Loading the laundry
Open the door.
Put the laundry in the washing machine. Close the door by
pushing it until it clicks, ensuring that no items of laundry are
obstructing the lock or door seal.
Putting detergent in machine
Open the drawer, choose the detergent and put in the
recommended amount.
Do not exceed the dosage stated below
Close the drawer again.
Selecting the programme
Refer to the Programme Guide or the programme descriptions
on the front of the machine to select the most suitable
programme.
The programme is selected by turning the programme selector
and aligning the programme name with the indicator.
Check that the STOP indicator is flashing, if not check that the
door is properly closed.
Check that the tap is turned on and that the discharge hose is
positioned correctly.
Select the required wash options
Select the appropriate drying time based on
the table to be found on page 19
24
A Typical Wash and Dry Cycle
Maximum
quantity of
powder/liquid
100ml
200ml
200ml
Wash
Prewash (option)
Main Wash
(all programmes)
Fabric Conditioner
Compartment
I
II
Liquid detergents and
some concentrated
powders and tablets
that are to be placed
directly into the drum
should be placed in
the recommended
dispensing device.
Do not use such
powders and
dispensing devices if
you are completing a
continuous wash and
dry cycle.
