Step 01) Please choose “For Administrator” and click “Wireless LAN Settings”. Then enable
“Using Wireless LAN”.
Click the Scan button and the camera will detect all WIFI devices around the area. It should also
display your router in the list. (Figure 1.9)
If the camera is not able to detect any WIFI device, please click the Scan button again. Make sure to
wait 1 to 2 minutes before selecting the Scan button again.
Figure 1.9 Wireless LAN Settings
Step 02) Click the SSID of your router in the list, the corresponding information (SSID & Encryption)
will be filled in the following boxes automatically.
You will only need to fill in the share key. Make sure that SSID, Encryption and share key you filled in
for the camera are exactly the same for your router.
Figure 2.0 Wireless LAN Settings
Step 03) Please click on the Submit button after all settings have been entered. The camera will
reboot after the camera has completed the reboot process, wait 10 seconds and disconnect the
