808511
129
Verklein
Vergroot
Pagina terug
1/135
Pagina verder
Voice control and additional services
130
Another receive mode, especially for battery operated HomematicIP devices is called
wake on radio. In this case, the receiver is “woken up” to receive radio data. During
the remaining time, the receiver stays in energy saving “sleeping mode”. Due to this
function, e.g. the HomematicIP Window / Door Contact can immediately reduce
the temperature of radiator thermostat, if an open window has been detected. If the
signals are directed to another HomematicIP device, the receiver will go back to the
energy saving “sleeping mode”.
During the development of HomematicIP, the wake on radio function of Homematic
has been further improved. In Homematic, all devices “wake up” as soon as the radio
communication is active on the 868.3 MHz band. For HomematicIP, this function
has been moved to another frequency (869.525 MHz). However, devices that support
wake on radio are woken up from “sleeping mode” only if this is really required.
Another advantage is that this function does not influence on the duty cycle limit of
the corresponding device.
All three methods are proven in millions of devices by eQ-3 and protected by patents for devices
with battery operation.
13.10.1 Device software update (OTAU)
To keep your HomematicIP devices up to date, HomematicIP oers the opportunity to update
the device software (firmware) of the components. The device firmware controls all function-
alities of your HomematicIP devices. The OTAU method (Over The Air Update) is an especially
comfortable method to provide new firmware to single devices, e.g. radiator thermostats, via
radio communication.
In a HomematicIP solution, the devices software updates are performed in the background
(background OTAU). In the server ( HomematicIP cloud) a device list with the relevant serial
numbers and firmware versions is provided. If for one or more of your HomematicIP devices
a new device software is available, the HomematicIP cloud forwards this information to your
HomematicIP Access Point. This transfers with every send radio telegram a part of the new
firmware file into the memory of the device.
13.10.2 Duty cycle
Like various other radio based devices, also HomematicIP components are subject to legal
regulations regarding the transmission time of radio signals (Duty cycle limit). The aim of this
regulation is to ensure a high level of transmission security of all devices working in a defined
frequency range using the short transmission times. HomematicIP devices operate in the 868.3
MHz and 869.525 MHz frequencies. The second frequency is mainly used for Wake On Radio
(see section “14.2 HomematicIP radio protocol and receive modes” on page 115).114
In the 868.3 MHz frequency range that is used for radio transmission of HomematicIP devices,
the maximum transmission time of any device is 1 %, i.e. 36 seconds in an hour. If this limit is
exceeded, the corresponding device may transmit only after the maximum transmission time
falls below the limit, for example after the hour expired.
The relatively low duty cycle value of 1 % oers the benefit that the radio channels are not
continuously occupied due to the short transmission times. Thus, there is a very high security
level at all times. This also has positive eect on the radio wave impact (see section “4.1 Wireless
range” on page 15).
129

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw HomeMatic IP system bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van HomeMatic IP system in de taal/talen: Engels als bijlage per email.

De handleiding is 3.55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info