67593
22
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
21
ENGLISH
BASIC OPERATION (continued)
Conceal stored channels
Picture format
Press , then press ϳ or ϴ to select desired picture format, then press ENTER.
AUTO
Automatically selects the aspect ratio (see note below).
NOTE
In case a screen switches with AUTO operation, the screen may become black for a moment according to
the conditions of a weak-electric-field and an input signal, but it is not a failure.
4:3
It shows a 4:3-picture in original size with grey bands on left and right side.
FULL
Stretches the left and right hand sides of a 4:3 picture horizontally to fill the screen, while leaving
the centre of the picture unstretched.
NOTE
In this mode the picture is geometrically distorted on the left and the right sides of the screen.
PANORAMIC
This mode is used with 16:9 signals from a Digital decoder, a DVD player or other external
source. This uniformly stretches a 4:3 image horizontally to fill the screen (For example, a 16:9
image is often stored “anamorphically” on a DVD, where the 16:9 image is stored as a horizontally
compressed 4:3 image - this mode restores the image to its correct 16:9 proportions).
ZOOM
This mode is used to zoom-in on (expand) 4:3 “letterbox” format pictures (with grey bars at the top
and bottom) so that they fill more of the screen.
NOTE
In the ZOOM mode, part of the picture may be slightly cut off due to the expansion. However, it is possible to scroll the picture up or
down to view the top or bottom part of the picture
26
.
14:9
This enlarges a 4:3 picture to the 14:9 format.
NOTE
When the Picture format is set to AUTO, the aspect ratio will automatically change according to the Wide Screen Switching (WSS)
signal, if it is available. This may be either transmitted by the broadcasting TV channel, or via a recording from a VCR etc. Any WSS
signal received will only be effective in the AUTO mode - however, some DVD players / Digital Decoders etc. will automatically
switch the aspect ratio via the SCART input (Pin 8 switching), even if AUTO is not selected. In any case if you want to change to a
different aspect ratio to the one selected automatically, you can change it by pressing
.
In PC mode, the Picture format is available only for 16:9 or 4:3 format. (In “WXGA INPUT” and “WVGA INPUT” mode, the Picture
format is not available.)
In HDMI or COMPONENT mode of scanning rate: 720p and 1080i, the Picture format is available only for FULL1, FULL2 and
ZOOM format.
SUBTITLE SUBTITLE
SUBTITLE SUBTITLE
You can conceal certain channels so that when you use the P+ or buttons they are skipped.
In this case these channels are not deleted - they can be accessed at any time using the 10 Number Buttons.
1
Select the channel to be concealed (i.e. CH29).
Press SKIP. The programme number flashes.
2
Select the next channel to be concealed.
Press SKIP. The programme number flashes.
You can conceal as many channels as you like.
Cancel concealment of channels
Select the concealed channels with the 10 Number Buttons.
The programme number flashes.
Press SKIP. The programme number no longer flashes.
This channel is no longer concealed.
(FULL)
(PANORAMIC)
(ZOOM)
(14:9)
[0-5 ] : SELECT
PICTURE SIZE
0.AUTO
1.4:3
2.FULL
3.PANORAMIC
4.ZOOM
5.14:9
:SETENTER
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi P42A01 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi P42A01 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Hitachi P42A01

Hitachi P42A01 Gebruiksaanwijzing - Nederlands - 36 pagina's

Hitachi P42A01 Gebruiksaanwijzing - Deutsch - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info