742508
12
Verklein
Vergroot
Pagina terug
1/144
Pagina verder
12
EN
Note: excessive time of filing the brine tank may
cause the overflow of water to sewage or outside
of the device. The supplier of the device shall not
be held responsible for any damages resulting
from improper setting of this parameter.
(5) Fast rinse - time of fast rinse. E.G., 5 - 10M
time of the 5th cycle of operation is 10 minutes
(m - indication in minutes)
The type of external signal send by the head. B-01
– a permanent signal during entire regeneration
(from the moment of leaving “in serv” position
to the moment to returning thereto. “In serv” –
signal only when the head changes its position
(head’s servo working).
mmol / l mval / l
mg CaCO3 / l
(ppm)
German
degree
French
degree
gpg
1 mmol / l = 1 2 100 5.6 10 5.8
1 mval / l = 0.5 1 50 2.8 5 2.9
1 mg CaCO3 / l = 0.01 0.02 1 0.056 0.1 0.058
1 German degree = 0.179 0.357 17.9 1 1.79 1.04
1 French degree = 0.1 0.2 10 0.56 1 0.58
1 gpg = 0.143 0.29 14.3 0,8 1.43 1
Sample controller programming:
If the keypad lock symbol is present on the display,
it has to be unlocked by pressing and holding up
the up [11] and down [12] button, until the key sym-
bol disappears.
1. In order to activate the setting change mode, the
Enter [9] button shall be pressed.
2. The [8] and [6] symbols will be lit in the settings
change mode. It will inform that the display
shows the current time. The colon (”:”) symbol
will be blinking between the indicator of hour
and minutes.
3. In order to activate the current time change
mode, the enter [9] button shall be pressed.
The indication of time and the [8] symbol will
start blinking.
4. In order to adjust the indication of hours, the up
[11] and [12] down buttons must be pressed cor-
respondingly.
5. In order to confirm the setting selected, the en-
ter [9] button shall be pressed. The selected in-
dication will be accepted and the controller will
go to the minutes setting mode.
6. In order to adjust the indication of minutes, the
up [11] and [12] down buttons must be pressed
correspondingly. In order to confirm the setting
selected, the enter [9] button shall be pressed.
The controller will confirm changing the time
with a short sound signal and will return to the
parameters setting mode.
7. In order to move to another option, the down [11]
button shall be pressed.
8. In order to activate the mode of changing anoth-
er option, the enter [9] button shall be pressed.
The indication of time and the [8] symbol will
start blinking. With the down [11] and Up [12]
button, the desired value shall be chosen and
confirmed with the enter [9] button.
The controller will confirm changing the time
with a short sound signal and will return to the
parameters setting mode.
9. In order to activate the setting change mode, the
enter [10] button shall be pressed.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hendi 230442 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hendi 230442 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 1,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info