742508
11
Verklein
Vergroot
Pagina terug
1/144
Pagina verder
11
EN
# Function Description
11 down moving to next option
12 up moving to previous option
13 capital letter D (day) informs that the digital indication is in days
14 capital letter H informs that the digital indication is in hours
15 capital letter M informs that the digital indication is in minutes Colour strips are lit on the left
side of the display during water treatment. The number of current operation
cycle (description below) and the time remaining are displayed during
regeneration
symbol m3/gal/L informs that the digital indication is in cubic meters (1 cubic metre = 1000 litres)/
gallons/litres
Functions of buttons in programming moda (230459 only)
After the programming mode is entered into, the
following functions are assigned to buttons:
Enter [9]: this button is used to activate and
confirm (after setting) the changed value. After
activation, the active value (currently changed)
blinks alongside the regulation symbol [8]. Now
this value can be changed. After the set value is
confirmed with enter [9], the regulation symbol
[8] will stop blinking, whereas the controller will
confirm the change with a short sound signal;
Regeneration [10]: leaving the programming
mode or changing values and moving to the pre-
vious mode of the controller;
Down [11] changing the type of parameter to be
programmed or reducing the active value;
Up [12] changing the type of parameter to be pro-
grammed or increasing the active value.
NOTE: Operation cycles time 2-5 is always pre-programmed adequately to the type and
quantity of resin in the container and the size of brine tank. The quantity of treated wa
-
ter was determined on the basis of the results of water examination delivered by You or
average values. A potential correction of these parameters shall be consulted with the
delivered of the device.
In the event of a power supply failure, the controller is equipped with a feature to store the
programmed parameters (including the current time) for 7 days.
Programming of the control head (230459 Model)
The programming mode is activated with the en-
ter [9] button. If the keypad is locked and the key
symbol is displayed, buttons must be unlocked be-
forehand by pressing for 5 seconds the down [11]
and up [12] buttons simultaneously. The regulation
symbol [8] lit indicates active mode of program-
ming settings. The regeneration symbol [10] clos-
es the programming mode. The mode will also be
closed automatically and the keypad will be locked
after 1 minute of inactivity.
A change of the displayed parameter can be done
with the down [11] button. Parameters to be pro-
grammed, the sequence of displaying:
• Current time (24-hour mode)
• The time of initiating the regeneration
Number of days between regenerations eg.
1-02D (regeneration every 2 days)
(2) Back wash - time of back wash in minutes.
E.G., 2 - 10M time of the 2nd cycle of operation is
10 minutes (m - indication in minutes)
(3) Regeneration - time of regeneration and slow
rinse. E.G., 3 - 60M time of the 3nd cycle of op-
eration is 60 minutes (m - indication in minutes)
(4) Brine refill - time of filling the brine tank. E.G.,
4 - 05M time of the 4th cycle of operation is 5
minutes (m - indication in minutes)
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hendi 230442 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hendi 230442 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 1,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info