502536
11
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
11
HD 990
Programmed Play Operation
Programmed Play
The HD 990’s advanced programming capability enables you to select certain tracks, to
preset the order in which these tracks play, and to clear specific programmed tracks after
the program was made.
Programmed play allows you to program up to 32 tracks into the HD 990’s memory. To
begin programming the CD player, make sure that the unit is in Stop mode, then press
the
Program
button d. The
Program
indicator will light in the
Information Display
1, the number 001 will blink below the Program indicator, showing the track number
selected, and PROG-01: 001 will appear in the Information Display, replacing the
track time. This indicates that you are about to program the first track.
You may now begin to enter the tracks in the order in which you wish to have them
play. To select a track on the disc, press the
Numeric
buttons c corresponding to the
desired track. Be certain to enter the second and/or third number of two- or three-digit
numbers within two seconds after the first number was entered. You may also use the
Skip
buttons 78h to select a track. When the track is selected, press the
Program
button d. Note that the program-step indication on the right side of the
Information
Display
will change to PROG-02: 001.
You may now select another track for the next program step, following the instructions
shown above. When the track is selected, press the
Program
button d again. Repeat
this procedure for each program step until you have completed the desired programming.
Press the
Stop
button 6k once to complete a program sequence, or press
Play
4jto begin immediate play of a program sequence. If the maximum of 99 program
steps is reached, the program-step indication at the right side of the Information Display
will go out, and the disc and track that have been programmed as the first program step
will be shown.
Once a program list has been entered, press the
Play
button 4jto begin listening
to the sequence. After the entire program has been played, the CD player will stop. As
long as the
Stop
button 6khas not been pressed twice and the
Program
indicator
remains lit, you may repeat the programmed-play sequence again by pressing the
Play
button 4j.
Editing a Program
A program can be edited even after it was completed by pressing the
Stop
button 6 k
once: Each time you press the
Program
button d the track number and program step
number will be displayed in the programmed order, but with steady track numbers (not
blinking) in contrast to the programming mode. As soon as the track number starts
blinking (this will take 1 second), the appropriate program step number shown at the left
side is not programmed yet; now you can change the track number with the
Skip
buttons
78hor the
Numeric
buttons c as described above and add it to the program
list by pressing the Program button d.
Pressing the
Stop
button 6k twice will return to normal mode and the
Program
indicator will go out, but the program will stay in memory and can be recalled easily by
pressing the
Program
button. But pressing the
Clear
button e (see below) or opening
the disc drawer by pressing
Open/Close
3p, will erase the program information
from the unit’s memory.
Checking Program Contents
To check the contents of a program while the unit is stopped at first note that the
Program
indicator is lit (otherwise press
Program
) and the program step indication PROG-01:
is not lit (otherwise press
Stop
once). Each time the
Check
button o is pressed now,
the Information Display will step through each of the programmed tracks. To cancel the
check mode press the
Stop
button twice.
Clearing Programs
To clear a single track from the program list, press the
Program
button d until the
track to be deleted from the program sequence appears in the
Information Display
1.
When the track number appears, press the
Clear button
e once, the track selected
will be deleted and the track number will be replaced by the next programmed one. Now
you can delete that track too with the Clear button or press the
Stop
button 6k and
again the
Program
d button to select lower track numbers to be deleted.
When the unit is stopped and the program step indication PROG-01: 001 is not
lit (otherwise press
Stop
once), but the
Program
indicator is still lit (otherwise press
Program
d) you may clear the entire contents of a program by pressing the
Clear
button e.
Important Note
: When you’ve pressed the
Program
button d (once or several times)
and the track number on the right starts blinking, the appropriate program step number
(e.g. PROG-02:008) shown at the left display side is not programmed yet. Do
not continue to press the Program button now, otherwise the track selected will be
memorized too. If you´re in doubt, press
Stop
button 6k and start the procedure
again with
Program
d.
Important Note
: Tracks programmed as described above can be played repeatedly too.
When you press
Repeat
f once after a program is created (the
Program
indicator must
be lit, otherwise press
Program
) and the program is played, the Repeat 1 indicator will
light and the track currently playing will be repeated continuously. If
Repeat
is pressed
twice, “Repeat All” will be displayed, all programmed tracks will be played subsequently
and the sequence will be repeated continuously until the Stop button is pressed.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon HD990 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon HD990 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Harman Kardon HD990

Harman Kardon HD990 Gebruiksaanwijzing - Nederlands - 16 pagina's

Harman Kardon HD990 Gebruiksaanwijzing - Deutsch - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info