Handleiding Harman Kardon HD990 (pagina 10 van 16) (Engels)

502536

Verklein

Vergroot

Pagina terug

1/16

Pagina verder

HD 990

Operation

Time Display

The CD player’s time display is capable of showing a wide range of information about

a CD.

In normal operation the display will show the total running time of a CD after the disc is

ﬁrst put in the unit. When the disc is played, the display will show the running time of a

track in play. Each time the track changes, the time display will reset to 00:00 and

begin to increase again as the new track plays.

To view the time remaining on an individual track, press the

Time

button n on the

remote once. The display will now show the time left in the track in play, and a “–” will

light in front of the time display as a reminder of the display’s status.

To view the elapsed time of the disc currently playing, press the

Time

button n

again.

To view the total time remaining to play on the disc, press the

Time

button n again, a

number greater than the formerly shown track remaining time (except the last track of

the disc is played) will appear in the display, again with a “–” in front.

When the Time button is pressed again the display will return to show the running time

of the track in play.

Note

: When a program is played (see page 11), all time modes are selectable, too, except

the total time remaining on the disc.

The Time mode is not available when playing back discs containing compressed MP3

data.

Disc Info

The HD 990 is able to show CD-text information from CD discs, as well as ID3 tag and

other information from discs containing MP3 data. Please note that not all CDs contain

CD-text. In that case, the Main Information Display will show “No CD-Text” and will

return to the Time mode previously selected. If you play back a CD that contains CD-text

information the Text indicator will light in the

Information display

1. During play, the

artist name, track name and album name can be made visible on the

Main Information

Display

1 by pressing the

Info

button t several consecutive times. Each press of

the

Info

button t will show the next line of information. If the text is longer than 12

characters, the text will scroll continuously from right to left on the

Main Information

Display

If you play a disc with MP3 data, the ﬁle name, the data rate (constant bit rate CBR and

variable bit rate VBR) and folder/root name can be made visible on the

Main Information

Display

1 by pressing the

Info

button t several consecutive times. If ID3 tag

information is included in the MP3 data, the artist name, track name and album name

can also be made visible. Each press of the

Info

button t will show the next line of

information. If the text is longer than 12 characters, the text will scroll continuously from

right to left on the

Main Information Display

1. To return to the normal track/time

indication press the

Time

button n.

If you wish to quickly scan through a disc to locate a particular passage or track, press

and hold the

buttons. The

Forward Search

button — 8 iplays the

disc forward in high speed, while the

Reverse Search

button ﬁﬁ 7 i plays

the disc backward in high speed. Holding the buttons pressed will triple the search speed

after 3 seconds. When the desired part of the disc is heard, release the

button to

resume normal play speed.

Skip

To move from one track on the disc to another during play mode, press one of the Skip

buttons. Pressing the

Forward Skip

button · 8 h will move you forward

through the disc, one track at a time, while pressing the

Reverse Skip

button ‡ﬁ

7h once will move you back to the start of the actual track (as long as >3 seconds

of the track have elapsed), and pressing it multiple times will move you back one track at

a time. Holding any Skip button pressed enables scanning quickly through all tracks on

the disc, as described previously.

The

Skip

buttons may be used when the CD player is either playing or stopped. If the unit

is stopped, the Skip buttons may be used to locate the ﬁrst track to be played. The

Play

button 4jmust be pressed to begin play. If the Skip buttons are used while the unit

is already playing (as described above), the audio output will stop while the new track is

located, and play will automatically resume with the new track.

If the

Skip

buttons are pressed when program play is in use (see page 11), the unit will

move from one programmed track to another.

Folder

Discs containing compressed MP3 data often contain several directories and folders with

data. To show the name of the current directory or folder playing, press one of the

Folder

+/–

buttons once. To change to the next directory or folder, press the

Folder +

button

r again within three seconds after the ﬁrst press. For the previous directory or folder,

press the

Folder –

button r.

The CD player counts each directory and folder as one folder. The player starts to count

in the main directory, and pressing the

Folder +

button r will start playback of the ﬁrst

folder in this directory. Pressing the

Folder +

button r again will start playback of the

second folder in the directory. Continue pressing the

Folder +

button r until the last

folder in the directory has been played. At this time, pressing the

Folder +

button r

will start playing the next directory.

Note that the

Folder +/–

buttons do not function when the CD player is playing the tracks

of a disc containing MP3 data in random order.

+10/–10

Due to the compressed format of MP3 data, discs can contain several hundred audio

tracks. In order to ﬁnd the right track within these hundreds of tracks, the CD player lets

you skip through the contents of your disc in steps of 10 tracks. Press the

+10

button

l to change to the 10th track after the track currently playing. If there are less then

10 tracks remaining on the disc, the last track will be played. Press the

–10

button l

to change to the 10th track before the track currently playing. If there are less then 10

tracks since the beginning of the disc, the ﬁrst track will be played.

Input/Source Selection

A unique feature of the HD 990 is that it allows other source components to be played

back using the high-grade audiophile digital-to-analog convertors inside the CD player.

Especially source components using older and less powerful convertors will beneﬁt from

this feature.

Connect the coaxial or optical digital output of the external source component to the

oaxial or Optical Digital Inputs 5

on the rear panel of the CD player.

In order to select the external source component for playback, press the

Source Button

s. The ﬁrst press of this button will show the input currently played, indicated by

“Player” for the CD player, “Coaxial In” (Digital in 1) or “Optical In” (Digital in 2). Within

2 seconds, press the

Source Button

s again until the requested source has been

selected.

Note that in order to hear the sound from the external source when connected via the

HD 990, the input of your ampliﬁer or receiver should be the one to which the HD 990

is connected.

Important Note

: The player will only output 2-channel PCM signals. Neither multi-

channel Dolby Digital or DTS nor their 2-channel downmix signals will be.

Harman Kardon HD990 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Andere handleiding(en) van Harman Kardon HD990

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info