502558
45
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
OPERATION 45
ENGLISH
IMPORTANT NOTES ON DIGITAL PLAYBACK:
When the digital playback source is stopped, or
in a pause, fast forward or chapter search mode,
the digital audio data will momentarily stop, and
the channel position letters inside the Speaker/
Channel Indicators
Ú
will flash. This is
normal and does not indicate a problem with
either the AVR or the source machine. The AVR
will return to digital playback as soon as the data
is available and when the machine is in a
standard play mode.
Although the AVR will decode virtually all DVD
movies, CDs and HDTV sources, it is possible that
some future digital sources may not be compatible
with the AVR.
• Note that not all digitally encoded programs
and not all audio tracks on a DVD contain full
5.1 or 6.1 channel audio. Consult the program
guide that accompanies the DVD or laser disc to
determine which type of audio has been record-
ed on the disc. The AVR will automatically sense
the type of digital surround encoding used,
indicate it in the Channel Input Indicators
Ú
and adjust to accommodate it.
When a Dolby Digital or DTS source is playing,
you normally may not be able to select some of
the analog surround modes such as Dolby Pro
Logic II, Dolby 3 Stereo, Hall, Theater, 5CH/7CH
Stereo or Logic 7, except with specific Dolby
Digital 2.0 recordings that can be played with
the Pro Logic II modes too (see page 42).
When a digital source is playing, it is possible
to make an analog recording using the Tape
3
or Video 1 or Video 2 or
Wa
record outputs,
even if the source is connected to any digital
input of the AVR only, as long as "Surround Off"
mode is selected (possible with a PCM source
only). But the analog two channel signal, even of
a Dolby Digital (not DTS) source, the ”Downmix”
to Stereo or Dolby Surround, can be recorded by
connecting its analog audio outputs to the
appropriate analog inputs (e.g. DVD) of the AVR.
Additionally, the digital signals will be passed
through to the Digital Audio Outputs
A
.
Using
The AVR 645 is equipped for use with
Harman Kardon’s optional iPod
docking station.
When The Bridge is connected to the AVR and an
iPod properly docked, you may use either remote
to control the iPod for audio playback, while
using the front-panel display and on-screen
semi-OSD messages to help you locate tracks or
view information about the track being played. In
addition, connecting an iPod to the AVR through
The Bridge also charges the iPod’s battery. Using
the
DMP AUTO POWER menu option, as
described on page 48, you may even have the
AVR automatically turn on with your iPod as a
playback source whenever the iPod is turned on.
To select The Bridge as the AVR’s input source:
• From the front panel, press the Input Source
Selector
7
on the front panel as needed.
• From the main remote, press the Input DMP
Selector
3
.
• From the ZR 10 remote, press the /DMP
Selector .
When The Bridge is connected and a compatible
iPod properly docked, the iPod’s menu will be
replaced with “harman/kardon” at the top of the
iPod’s screen and the front panel display and
semi-OSD message will show messages that will
guide you through the menu and content
selection. If the Lower Display Line
˜
shows
an
UNPLUGGED… message, please check to
see that the correct iPod adapter is used in The
Bridge and that the iPod is properly seated.
The AVR’s front-panel controls may also be used
to access a limited number of iPod functions.
Press the AM/FM
!
to play or pause the
current track. The Tuning Selector
)
may be
used to search in reverse (left side of button) or
forward (right side of button) through the tracks.
Press the Tuner Band Selector
!
to call up
the iPod’s menu. Press the Preset Station
Selectors
#
to scroll and the Set Button
@
to select. For complete information on using the
remote or front-panel controls to operate an
iPod, see the instructions that are included with
The Bridge.
Tape Recording
In normal operation, the audio or video source
selected for listening through the AVR is sent to
the record outputs. This means that any program
you are watching or listening to may be recorded
simply by placing machines connected to the out-
puts for Tape Outputs
3
or Video 1 or 2
Outputs
PRWa
in the record mode.
When a digital audio recorder is connected to
any of the Digital Audio Outputs
A
, you are
able to record the digital signal using a CD-R,
MiniDisc or other digital recording system.
Note that all digital signals will be passed
through to both, coaxial and optical, digital
outputs simultanously, no matter which kind of
digital input was selected.
Front Panel In/Outputs
In addition to the rear panel digital outputs, the
AVR offers Harman Kardon’s exclusive config-
urable front panel output jack feature. For easy
connection of portable devices, you may switch
the front panel Digital Coax 4 jack
Ó
or the
Video 4 jack
Ô
from an input to an output by
following these steps:
1. Press the OSD button
L
to view the
MASTER MENU (Figure 7).
2. Press the Set button
F
to enter the
IN/OUT SETUP menu (Figure 8).
3. Press the
¤
button
E
so that the on-screen
cursor is next to
VIDEO 4 or
COAXIAL 4 depending on which input you
wish to change to an output. Either input, or
both may be changed at any time.
4. Press either of the
/
buttons
E
so that
the word
OUT is highlighted.
5. Press the OSD button
L
to exit the menus
and return to normal operation.
Note that once the setting is made, the
appropriate Input/Output Status Indicator
( will turn red, indicating that the selected
analog or digital jacks are now an output,
instead of in the default setting as an input.
Once changed to an output, the setting will
remain as long as the AVR is turned on, unless
the setting is changed in the OSD menu system,
as described above. Note, however, that once the
AVR is turned off, the setting is cancelled.When
the unit is turned on again, the front panel jacks
will return to their normal default setting as an
input. If you wish to use the jacks as an output at
a future time, the setting must be changed again
using the OSD menu system, as described above.
NOTES:
The digital outputs are active only when a digital
signal is present, and they do not convert an
analog input to a digital signal, or change the
format of the digital signal (e.g. Dolby Digital to
PCM or vice versa, but coaxial digital signals are
converted to optical signals and vice versa). In
additon, the digital recorder must be compatible
with the output signal. For example, the PCM
digital output from a CD player may be recorded
on a CD-R or MiniDisc, but Dolby Digital or DTS
signals may not.
To make an analog recording from a digital
source is possible, but only from a PCM source
(not Dolby Digital or DTS) and correctly only with
"Surround Off" mode (with any Surround mode
only the L/R front signals will be fed to the record
outputs).
The
Brid
g
e
TM
Operation
29851_AVR645_ENG 30/10/06 9:46 Side 45
45

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon AVR645 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon AVR645 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Harman Kardon AVR645

Harman Kardon AVR645 Gebruiksaanwijzing - Nederlands - 68 pagina's

Harman Kardon AVR645 Gebruiksaanwijzing - Deutsch - 68 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info