24 OPERATION
Operation
sources to be played back with full digital intel-
ligibilty while reducing the minimum peak level
by
1
/4 to
1
/3. This prevents abruptly loud transi-
tions from disturbing others without reducing
the impact of the digital source. The Night
mode is available only when Dolby Digital
signals with special data are being played.
To engage the Night mode, press the Night
buttonz on the remote and note that the
NIGHT mode indicator M will illuminate in
the Information Display and a message will
appear on the OSD.
IMPORTANT NOTES ON
DIGITAL PLAYBACK:
1. When the digital playback source is stopped,
or in a pause, fast forward or chapter search
mode, the digital audio data will momentarily
stop, causing a NO DATA message to be dis-
played in the Main Information Display U
or on-screen display.This is normal and does
not indicate a problem with either the AVR 300
or the source machine. The AVR 300 will return
to digital playback as soon as the data is avail-
able and when the machine is in a standard
play mode.
2.Although the AVR 300 will decode virtually all
DVD movies, CDs and HDTV sources, it is possible
that some future digital sources may not be com-
patible with the AVR 300.
3. Note that not all digitally encoded programs
contain full 5.1 channel audio. Consult the pro-
gram guide that accompanies the DVD or laser
disc to determine which type of audio has been
recorded on the disc. The AVR 300 will auto-
matically sense the type of digital surround
encoding used and adjust to accommodate it.
4. When a digital source is playing, you may not
select any of the analog surround modes such
as Dolby Pro Logic, Dolby 3 Stereo, Hall 1/2 or
Theater.
5. When a Dolby Digital or DTS source is play-
ing, it is not possible to make an analog record-
ing using the Tape g and VCR 1 ™ record
outputs. However, the digital signals will be
passed through to the digital audio outputs ª.
PCM Audio Playback
PCM (Pulse Code Modulation) is the non-
compressed digital audio system used for
compact discs and Dolby Digital or DTS laser
discs. The digital circuits in the AVR 300 are
capable of high-quality digital-to-analog decod-
ing, and they may be connected directly to the
digital audio output of your CD or LD player.
Connections may be made to either the Optical
or Coaxial inputs deon the rear panel.
To listen to a PCM digital source, first select the
input for the desired source (e.g., CD). Next press
the Digital Select button ¯kand then
use the
⁄
/
¤
buttons h on the remote or the
Selector buttons
34
on the front panel until
the desired choice of either OPTICAL or
COAX appears in the Main Information
Display U. Press the Set button i
31
to
enter the desired choice.
When a PCM source is playing, the PCM indi-
cator E will light, and the Main Information
Display will show the input source and the digi-
tal type. During PCM playback you may select
any surround mode except Dolby Digital. When
an audio-only DTS disc is played, the AVR will
automatically select the DTS mode, and no
other mode may be selected.
Tuner Operation
The AVR 300’s tuner is capable of tuning AM,
FM and FM Stereo broadcast stations. Stations
may be tuned manually, or they may be stored
as favorite station presets and recalled from a
30-position memory.
Station Selection
1. Press the AM/FM button
$
y to select
the tuner as an input.
2. Press the AM/FM button
$
y again to
switch between AM and FM so that the desired
frequency band is selected.
3. Press the Tuner Mode button
*
n
to select manual or automatic tuning.
When the AUTO indicator Q is illuminated in
the Main Information Display the tuner will only
stop at those stations that have a strong enough
signal to be received with acceptable quality.
When the MONO indicator R is illuminated,
the tuner is in a manual mode and will stop at
each frequency increment in the selected band.
4. To select stations press the Tuning button
%
w. When the AUTO indicator Q is
illuminated, press the buttons for two seconds
and then release to cause the tuner to search
for the next highest or lowest frequency station
that has an acceptable signal. When tuning FM
stations in the Auto mode, the tuner will only
select Stereo stations. To tune to the next sta-
tion, press the button again. If the MONO indi-
cator R is illuminated, tap the Tuning button
%
w to advance one frequency increment at
a time, or press and hold it to locate a specific
station. When the TUNED indicator T illumi-
nates, the station is properly tuned and should
be heard with clarity.
5. Stations may also be tuned directly by press-
ing the Direct button s on the remote, and
then pressing the Numeric Keys p that cor-
respond to the station’s frequency. The desired
station will automatically be tuned.
NOTE: When the FM reception of a station is
weak, audio quality will be increased by
switching to Mono mode by pressing the
Tuner Mode button
*
n until the
STEREO indicator S goes out.
Preset Tuning
Up to 30 stations may be stored in the
AVR 300’s memory for easy recall using the
front-panel controls or the remote.
To enter a station to the memory, first tune the
station using the steps outlined above; then:
1. Press the Memory button o on the
remote. Note that MEMORY indicator P will
illuminate and flash in the Information Display.
2. Within five seconds, press the Numeric
Keys p corresponding to the location where
you wish to store this station’s frequency.
3. Repeat the process after tuning any
additional stations to be preset.
Recalling Preset Stations
• To manually select a station previously
entered in the preset memory, press the
Numeric Keys p that correspond to the
desired station’s memory location.
• To manually tune through the list of stored
preset stations one by one, press the Preset
buttons &von the front panel or remote.
• To automatically scan through the stations
entered in the preset memory, press the
Preset Scan button
^
on the front panel.
