502541
26
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
26
26
INSTALLATION
NOTE: The AVR 347 is equipped with a total of eight digital
audio inputs, not including the HDMI inputs: six on the rear panel
(Coaxial 1, 2 and 3, Optical 1, 2 and 3) and two on the front
panel (Coaxial 4 and Optical 4). However, there are a total of nine
sources that may be connected to devices that have digital audio
outputs. We recommend certain digital audio connections simply
because, as reflected in Table A1 of the Appendix, those digital
audio inputs are assigned to those sources by default at the factory.
But any digital audio input (except HDMI) may be reassigned to
any source. Since you may not be using all nine source inputs,
you may reassign a digital audio input that is recommended for
a source you aren’t using to another device. Table 2 is a guide;
you may need to make adjustments to fit your system.
Video 1 Source
Since this source includes audio and video recording output jacks, it is
best suited to a video recorder, such as your VCR or DVR/PVR.
Referring to Table 2, connect your recorder to the Video 1 Analog Audio
inputs and outputs
and to any available coaxial or optical digital audio
input (and corresponding digital audio output). See Figure 20. Use either
the Video 1 S-video or composite video input and output if you wish to
make recordings. If you don’t plan on recording, you may use the
Component Video 2 inputs.
Figure 20 – Video 1 A/V Inputs and Outputs, and Digital Audio Inputs and Outputs
Remember to connect the audio and video
output
jacks on your
recorder to the Video 1 or digital audio
input
jacks on the AVR, and the
audio and video
input
jacks on your recorder to the Video 1 or digital
audio
output
jacks on the AVR.
NOTE: It isn’t possible to make recordings using component
video or HDMI connections. Keep this in mind as you connect
other source devices that you may wish to make recordings from.
Video 2 Source
The Video 2 source is used only for playback. The AVR 347 remote
control is programmed to operate many brands and models of cable
and satellite television devices, and we recommend connecting your
cable or satellite set-top box to this source.
Referring to Table 2, connect your set-top box to the Video 2 Analog
Audio inputs
and to the Optical 1 Digital Audio input. If possible, use
the Component Video 3 inputs. Otherwise, connect the set-top box’s
S-video or composite video output to the matching Video 2 video input.
See Figure 21.
Figure 21 – Video 2 A/V, Digital Audio and Component Video Inputs
Video 3 Source
The Video 3 source is used for playback only. The remote control is
programmed to operate a TV, but you may connect any audio/video
source device to the Video 3 inputs and use the device’s own remote
to control it.
If you receive your television programming using your TV with an antenna
or direct cable connection, connect the analog audio outputs (if available
on your TV) to the Video 3 Analog Audio inputs. See Figure 22.
Do not
connect any video output on the television set to any video input on the
receiver. See Step Five for information on connecting the receivers
video monitor outputs to the TV.
NOTE: You may connect any video source other than a display
device to the Video 3 S-video or composite video inputs.
Figure 22 – Video 3 A/V Inputs
Video 4 Source
The Video 4 source is used only for playback. It is also generally
reserved for components that are only temporarily connected to the
receiver, such as cameras and game consoles. When not in use, you
may place the supplied covers over the front-panel Video 4 jacks for
a cleaner appearance. Simply snap the covers in place. When you wish
to use the jacks, gently press on the left side of each cover to pivot
it out for removal.
Referring to Table 2, connect your camera or game console to the
Video 4 Analog Audio inputs
and to either the Coaxial 4 or Optical 4
digital audio input. Connect the component’s S-video or composite
video output to the matching Video 4 video input. See Figure 23.
Figure 23 – Video 4 A/V and Digital Audio Inputs
NOTE: The Video 4 Input Selector on the remote may be pro-
grammed to operate a television or video display only.
AVR347 om.qxd 7/10/07 11:01 AM Page 26
26

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Harman-Kardon-AVR-347

Zoeken resetten

  • Geachte heer, mevrouw,

    Hoe moet ik, om sacd's af te spelen, mijn Sony dvd/cd/sacd speler aansluiten op mijn Harman Kardon AVR 347? Op de speler zit een digitale coaxiale uitgang en een hdmi uitgang. Gesteld op 23-2-2021 om 14:07

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon AVR 347 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon AVR 347 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Harman Kardon AVR 347

Harman Kardon AVR 347 Gebruiksaanwijzing - Nederlands - 64 pagina's

Harman Kardon AVR 347 Gebruiksaanwijzing - Deutsch - 64 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info