813561
14
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
14
15
turned to ON can lead to accidents.
Remove the adjustment key before switching on the
device. If a wrench or adjustment key is left on the
rotating part of the power section, this can lead to
injuries.
Do not over-tighten the attachment. Always make
sure that you can maintain a strong and balanced
stance. This assures better control in unexpected
situations.
Do not over-estimate your capacities. Make sure
you have a secure stance and balance at all times.
This allows for better control over the device in
unforeseen situations.
Wear appropriate clothing. Do not wear loose
clothing or jewellery. Make sure that hair, clothing
and gloves cannot become caught in the moving
parts.
Never work at a higher speed than the maximum
rated speed of the drill bit.
Always start drilling at a low speed and with the
drill bit in contact with the workpiece.
Only apply pressure in a direct line with the bit,
and never apply excessive pressure.
4. USE AND CARE OF THE DEVICE
Use the correct device configuration for the
respective application. A properly configured device
will allow better execution of the task and is safer for
the intended purpose.
Do not use the device if the on/off switch is not
working correctly. Any device that cannot be
switched on and off with the switch is dangerous and
must be repaired immediately by a specialist dealer.
Remove the battery pack from the device before
altering settings, replacing accessories or storing
tools. These safety measures help to avoid the risk of
the device switching itself on unintentionally.
The device may only be used by children who
are 8 years of age or older and by people with
limited physical, sensory or mental capabilities
or a lack of experience and knowledge if they
are supervised or have received appropriate
instruction on how to use the device, to operate
the device safely and in accordance with
regulations, and have been adequately informed
of all dangers that may arise from its use.
Cleaning and user care must not be carried out by
children unless they are older than 8 years of age and
are supervised.
Maintenance of the device. Make sure that moving
parts are correctly attached, firmly in place, and free
from damage that could impair the functionality of
the device. If the device is damaged, you must have it
repaired by an authorized dealer.
Keep the cutting tools clean and fresh. Properly
maintained cutting tools with sharp blades are less
likely to become clogged and are easier to control.
Use the device and accessories in accordance with
these instructions, taking into account the working
conditions and the task to be performed. Using the
device for work for which it is not intended can lead
to dangerous situations.
Only ever charge the battery using the charger
provided by the manufacturer.
A charger designed for a different battery pack can
create a fire hazard if it is used for charging.
When the battery pack is not in use, keep it away
from other metal objects as these could potentially
short-circuit the poles of the battery. If the poles of
the battery are connected to one another, a fire or fire
may result.
In the event of improper working and storage
conditions, liquid can escape from the battery. Avoid
this coming into contact with the skin under all
circumstances. If you accidentally come into contact
with the liquid, rinse it off immediately with water.
M22606_HammersmithMultitool_Manual_V03_20220629_MM.indd 14M22606_HammersmithMultitool_Manual_V03_20220629_MM.indd 14 20.07.22 12:2120.07.22 12:21
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw HammerSmith M22606 Multitool bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van HammerSmith M22606 Multitool in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 3.76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info