812036
10
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
10
Press the left key on the control unit until the
information page appears.
Press right key (menu), then with the two
middle keys, set the cursor to Mode – press
right key (select) – with the two middle keys,
set the cursor to Mode „OFF“ – press right
key (Save).
The stove initiates the operating state Cooling
and can no longer start the heating operation
automatically, not even with undershooting of
the set room temperature.
During the operating state OFF, the control
unit and parts of the controller continue to be
supplied with power (approx. 9 Watt per
hour).
5.10. Power failure
The control unit has a buffer battery, so that
the data are retained during the power failure.
Differentiation is made between a short-term
and a long-term power failure.
Short-term power failure – duration of the
power failure shorter than 30 seconds:
After the power supply is returned, the stove
resumes its operation from that point in which
it was before the power failure.
Long-term power failure – duration of the
power failure longer than 30 seconds
After the power supply is returned, the stove
switches to the operating state Safety
Shutdown.
With a power failure, a small quantity of flue
gas can possibly escape.
5.11. Overheating
If the maximum permissible waste-gas
temperature is exceeded, then a safety
shutdown is initiated and the following error
message appears on the display:
„Shutdown waste-gas temperature heating
operation too high“
The stove can only resume its heating
operation when the error message on the
control unit has been acknowledged and the
required operating mode has been set again.
5.12. Low-temperature shutdown
If, during the operating state Heating, the
stove cools below a minimum temperature,
then a safety shutdown is initiated and the
following error message is indicated on the
display:
„Shutdown waste-gas temperature heating
operation too low“
The stove can only resume its heating
operation when the error message on the
control unit has been acknowledged and the
required operating mode has been set again.
6. Description of keys on the control unit
6.1. Control unit
As shown in the picture, the display is divided
into five areas.
The page label contains the name of the
respective page in which the operator is
presently in. In the same row, the page
number is indicated right-aligned.
In the menu- / Info area, there are four rows
each with 21 characters available for the text
display.
In the information pages, the operator
switches between the individual information
pages with the keys 2 and 3.
If the operator is in the selection menu, then
at the same time he is shown 4 submenu
items. With the keys 2 and 3, he can select
between the individual menu items, whereby
the menu item currently selected is
highlighted with a black bar. If after the
selection of the 4th menu item, the key 3 is
Page label Page No.
Description
Left key Description
Right key
Description
Middle keys
1 2
3
4
Mode Heating
Operating state Standby
Room taget/actual 20/20°C
Time Date
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Haas-Sohn COMPACT-PELLET 310 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Haas-Sohn COMPACT-PELLET 310 in de taal/talen: Engels als bijlage per email.

De handleiding is 3.71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Haas-Sohn COMPACT-PELLET 310

Haas-Sohn COMPACT-PELLET 310 Gebruiksaanwijzing - Deutsch - 43 pagina's

Haas-Sohn COMPACT-PELLET 310 Gebruiksaanwijzing - Français - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info