812036
7
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
7
Picture 4: Windbreak of the air-intake line
The following table is applicable for the
dimensioning of the air intake:
Diameter
Intake tube* Maximum
length* Max. number
of 90° bends
50mm 0.5 m 1
70mm 1 m 1
100mm 3 m 3
*The respective specifications are independently applicable.
The cross-section is to be chosen accordingly when using a
flat duct or the like.
If the dimensions fall below, it can happen,
that the quantity of combustion air is
insufficient. As a result, an increased
formation of slag occurs in the burner tray
and consequently safety shutdowns.
Connection to the power supply:
Connect the stove to the power supply with
the supplied mains cable (see Picture 1).
4. The functional features of the pellet
stove
The functioning method of your pellet stove is
designed for the maintaining of a constant,
comfortable room temperature. The
generation of heat in the stove is therefore
governed automatically according to the
required room temperature set by the
operator (target temperature). Depending on
the difference in temperature between target-
and current room temperature (actual
temperature), in a modular fashion the
controller selects the output or the „Standby“-
operation. As a result, the pellet stove
ensures a greatest possible adaptation of the
burning behavior to the situation in the room
of installation, without constant manual
corrections.
5. Operating states of the pellet stove:
The function of the pellet stove is
characterized by eight operating states:
5.1. Measurement – degree of soiling of
burner tray before the start phase
The start phase begins when the current
room temperature falls below the set target
temperature by 1°C and the stove has cooled
to a temperature of less than 80 C°.
Before the beginning of the start phase, a
measurement of the degree of soiling of the
burner tray is performed.
During this measurement, the components
are switches as follows:
Induced draught blower – ON
Convection air blower – OFF
Screw conveyor – OFF
Ignition – OFF
If the „Burner test“ concludes successfully,
i.e. the burner tray is not or only slightly
soiled, then transition to the operating state
Start Phase takes place.
If the „Measurement – Burner tray soiling“ is
not concluded successfully, i.e. the burner
tray is more heavily soiled than is permitted,
then transition to the operating state Safety
Shutdown takes place and the following error
message appears on the display of the
control unit.
Quit
15:00 24.01.2004
Fault
Shutdown Air Volume
Check burner
Picture 5: Error message
5.2. Start phase
After successfully concluded „Measurement –
Burner tray soiling“, transition to the operating
state Start Phase takes place.
In the „Start phase“, the burner tray is filled
with a precisely defined quantity of fuel and
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Haas-Sohn COMPACT-PELLET 310 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Haas-Sohn COMPACT-PELLET 310 in de taal/talen: Engels als bijlage per email.

De handleiding is 3.71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Haas-Sohn COMPACT-PELLET 310

Haas-Sohn COMPACT-PELLET 310 Gebruiksaanwijzing - Deutsch - 43 pagina's

Haas-Sohn COMPACT-PELLET 310 Gebruiksaanwijzing - Français - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info