625733
7
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
7
BATIUM 25/24
EN
This manual contains safety and operating instructions. Read it carefully before using the charger for the rst time and keep it in a
safe place for any future reference.
GENERAL DESCRIPTION
Batium is designed to:
. charge liquid or gel electrolyte lead-acid batteries from 35 Ah to 350 Ah in 6V, 12V or 24V (3 elements 2V – 6 elements 2V – 12
elements 2V).
. charge lead traction batteries from 35 Ah to 180 Ah in 6V, 12V or 24V (3 elements 2V – 6 elements 2V – 12 elements 2V).
CONNECTION AND OPERATION
Follow the connection instruction as below.
Precaution: Check electrolyte level of the battery. Fill out it necessary before charging.
1.Connect the charger on a 230V mains.
2.Switch on the device. A chain of lights will enlighten the screen.
3.Select the charging curve (IUoU for automotive batteries, IUIo for traction batteries). To select IUIo press 5
seconds.
4.Select the battery voltage (6V, 12V, 24V) according to the indications written on your battery or to the coupling
done. (in series or parallel see P23).
5.Select the charging speed according to your battery capacity (Ah) written on your battery.
6.Connect the clamps : Red clamp on the battery +and black clamp on the – or plug the specic connector (see
IUIo charging function)
7.Before starting the charge, Batium performs the following operations :
a- battery analysis: voltage/ battery condition… (In case of any anomalies, Batium mentions it - see anomalies, rea-
sons, remedies subdivisions). b- Restores the battery when the voltage is too low.
8.Batium starts the charging and indicates the charging stage as well as the charging current (A).
9.When the battery is charged, switch the device o.
10. Disconnect the power cable.
11.Unplug the clamps or the battery connector.
Nb: between each use or after a power cut, BATIUMsaves the last settings used and will position itself back on the last voltage,
speed and charging curve selected. (except for SOS Recovery mode which is not memorized).
CHARGING FUNCTION IUOU
This function enables to charge automotive liquid or gel electrolyte lead batteries from 35 Ah to 350 Ah and from light
to heavy vehicle. Find below the charging process :
Indicator light on Display
Phase 1 :
Voltage rise.
Charging
current
Phase 2 :
Voltage regulation (during 2 hours)
Charging
current
Phase 3 :
Charge end (Floating)
IUoU
IUIo
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gys BATIUM 25-24 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gys BATIUM 25-24 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 0,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info