2828
The device is suitable for music CDs displaying the logo shown here (CD-DA) and for
CD-Rs and CD-RWs with audio data.
When burning CD-R and CD-RWs with audio files, various problems may arise which
could lead to interference in playback. This can be caused by faulty software or hard-
ware settings or by the CD being used. Should such problems arise, contact the customer
services of your CD burner or software manufacturer or look for relevant information, for
example on the Internet. When you are making audio CDs, observe all legal guidelines and
ensure that the copyright of third parties is not infringed.
Always keep the CD compartment closed to prevent dust from collecting on the laser optics.
Do not attach adhesive labels to CDs. Keep the surfaces of CDs clean. You can play standard
12 cm CDs as well as 8 cm CDs on your device. An adapter is not necessary.
Selecting the CD input source
1 Move the »CD TAPE/OFF RADIO« switch to the »CD« position.
2 Press »OPEN« to open the CD compartment.
3 Insert a CD in the compartment with its label facing upwards.
4 Close the lid of the CD compartment.
– The device reads the content of the CD. The display shows the number of tracks
(RRCD 1300) or the number of tracks and the total playing time (RRCD 1310).
CD playback
1 Press »PLAY/PAUSE
ı
II« to start playback.
– Playback begins with the first track.
– Display: the current track number (RRCD 1300) or the current track number and the
elapsed playing time (RRCD 1310).
– Playback stops at the end of the CD.
2 Press »PLAY/PAUSE
ı
II« to pause playback pause.
3 Press »PLAY/PAUSE
ı
II« to resume playback.
4 Press »STOP
7
« to end playback.
5 Press »OPEN« to open the CD compartment and take out the CD.
6 Close the CD compartment.
Repeating the current track
1 Press »SKIP 8« briefly during playback.
– The track is repeated from the beginning.
CD MODE ________________________________________________________
