25
Special Functions
❒
Remote control of two recorders
When the switch is in the VIDEO 2 position, you can
control your GV 500;
When the switch is in the VIDEO 1 position, you can
control the second recorder.
w
!
If the 1 VIDEO 2 switch is not set to the selected
VCR address when controlling your GV 500, the
indication »
VID I
« or »
VID 2
« on the recorder
advises you that you must switch the remote
control to the other VCR address.
2
1
Remote control of other GRUNDIG
video recorders
With this remote control you can control different
GRUNDIG video recorders independently of each
other.
You can use it with your GV 500 and a second
recorder from the series VS 600 to VS 900 and the
GV 200 and later models.
The GV 500 must be adapted in order for the recor-
ders to respond correctly to the remote control
commands.
❒
Preparation
Switch the TV set on.
Select the programme position for the video recor-
der at the TV set (AV programme position).
❒
Selecting the VCR address for the GV 500
Call up the info table using the h button.
Use the DC buttons to select the » Installation «
line and call it up using the G button.
Use the DC buttons to select the »VCR address«
line and call it up using the G button.
– The »VCR address « table appears.
Select VCR address 2 using the FEbuttons.
Confirm the setting using the G button.
– The recorder switches the table off.
5
4
VCR address:
1 2
–––––––––––––––––––
iu OK i
3
2
1
2
1
VIDEO 1
VIDEO 2
TV
