Radio Reception
• Switch the set on with the +/- or PRESET buttons.
– You will receive the last heard station (e.g. FM II) with the volume level last set.
• Press the SNOOZE button to switch the radio off.
Programming/Calling up the FM Presets
You can store in memory up to 8 FM stations. These are positioned in two levels.
The first level with 4 preset stations is indicated by FM I - FM IIII symbolisiert.
The second level (once more 4 preset stations) is indicated by a flashing indication >>FM I<< - >>FMIIII<<.
• The PRESET button allows you to step through the preset positions FM I - FM IIII - >>FM I<< -
>>FMIIII<<.
– After selection of a preset with the PRESET button, the display shows during a short time the frequency
of this preset.
• You can now select the desired frequency (87.5 MHz - 108 MHz) with the TUNE-UP, TUNE-DOWN
buttons (behind the flap on the backside of the unit).
– The actual frequency is always indicated in the lower part of the display.
• Hold PRESET down for 5 seconds to store the actual frequency in the indicated position
Calling up stored stations
• Select the desired station preset FM I - FM IIII - >>FM I<< - >>FMIIII<< by repeatedly pressing the
PRESET button.
– The respective frequency is shortly indicated on the display.
– If FM reception is disturbed, reposition the connected aerial.
Volume control
If you briefly press +/-, the display indicates for approx. 4 seconds the
volume level adjusted before switching off (e.g. LA 32).
• Adjust the desired volume level with the +/- buttons.
When connecting commercially available headphones (socket at the right side of the unit), the built-in
loudspeaker is disconnected.
• For this reason, the headphone must not be connected if you wish to be woken up by a radio programme.
Tone control
• Adjust the tone to your preferences with the TONE LOW/HIGH control (behind flap in back of unit).
