Serial output
This set is provided with a serial data output (Cinch (phono) socket DATA OUT behind flap on back of set)
for exact clock synchronization of PC’s or computer networks.
The corresponding software and hardware can be obtained from:
AFG - Elektronik GmbH Fischer Consulting Ulf Olsen GmbH
Würzburgerstraße 197 Murrwiesenstraße 18
90766 Fürth 71570 Oppenweiler
Germany Germany
Telefon (0911) 97385-0 Telefon (07191) 483-0
Telefax (0911) 738583 Telefax (07191) 483-49
If required, contact the addresses given above.
Display brightness
• You can adjust the desired basic display brightness with the +/- buttons when the SNOOZE is pressed
and held down.
– The display brightness then adjusts itself to the actual room illumination.
Display/Melody test programme
• First press and hold down the SNOOZE button and then press in addition the PRESET button for more
than 6 seconds.
– All segments will be indicated one after the other in 0.5 s-rythm in the display.
Then all segments are illuminated permanently.
• Pressing any button then starts play of all available melodies. The
display indicates, for example:
• While the melodies are played, you can jump at any time to the be-
ginning of the next or preceding melody by pressing the +/- buttons.
• The next pressure on any button (not the +/- button) will terminate the test programme.
Notes
• Only a soft cloth which picks up dust should be used to clean the cabinet. Do not use aggresive polishes
or cleaning agents.
• Do not expose the unit to moisture (e.g. dripping or splashing).
• The type label is on the bottom of the unit.
Technical specifications
Wavebands: FM 87,5 - 108 MHz (ZF: 10,7 MHz)
Output power (to DIN 45324): 500 mW sine (peak) power
Subject to technical alterations and alterations in styling. E. & O.E.
