Connecting a digital multi-channel amplifier or
digital two-channel audio system
The digital multi-channel sound of a DVD can best be decoded and
played back with a multi-channel audio/video amplifier (Dolby*
digital decoder or DTS**).
1 Plug the adapter cable supplied into the »DIGITAL AUDIO
OUT
« socket on the DVD player and the corresponding socket
on the digital multi-channel amplifier (digital audio signal).
Note:
Even if you are using a digital connection, you should still make
an analogue audio connection as it is possible, depending on
the disc type, that the signal cannot be output via the »
DIGI-
TAL AUDIO OUT
« socket (see page 14 for connection).
CONNECTION AND PREPARATION
__
13
ENGLISH
* Manufactured under licence from Dolby Laboratories Licensing Corporation.
“Dolby” and the double-D symbol “
g “ are trademarks of the Dolby Labora-
tories Licensing Corporation. Copyright 1992 Dolby Laboratories, Inc. All
rights reserved.
** DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc. All
rights reserved.
