ENGLISH
11
Searching for stations
This search looks for receivable stations among the available
bouquets of digital stations.
1 Switch on the digital receiver by pressing »
Ǽ«.
– The »First Time Installation« page appears when the device is
first switched on.
2 Press »OK« to start initial setup.
3 Select your language using »
Ǹ
« or »
Ƿ
« and press »OK« to
confirm.
– The »Settings« menu appears.
4 Press »
Ǹ
« or »
Ƿ
« to select the country.
5 Select »Screen Format« with »P+« or »P-« and press »
Ǹ
« or
»
Ƿ
« to select the screen format.
6 Select »TV Output Format« with »P+« or »P-« and select the
video signal by pressing »
Ǹ
« or »
Ƿ
«.
7 Select »Active Antenna« with »P+« or »P-«.
Note
The antenna power supply may only be switched on if the
antenna is actually an active indoor antenna with a signal
amplifier and it is not already supplied with a voltage via a
mains plug (or similar supply). Otherwise you may cause a
short circuit and irreparably damage your antenna.
8 Press »
Ǹ
« or »
Ƿ
« to switch the antenna voltage on or off.
Note
If »Antenna short circuit« appears on the screen, switch off the
digital receiver and remove the cause. The antenna has an
excessive current consumption (max. 30 mA) or a short circuit.
9 Select the »OK« button with »P+« or »P-« and press »OK« to
confirm the entries.
– The »Automatic Search« menu appears.
– You can retain the values for the start and end frequency.
– Select the »All« option in »Channels to search for« if you
would also like to receive encoded stations.
10 Select the »OK« button with »P+« or »P-« and press »OK« to
start the search.
– Display: »Scanning«, the progress of the search is shown as a
percentage.
– A message will appear once the search has ended.
BASIC SETTINGS __________________________________
