ENGLISH
35
INFORMATION_____________________________________
Troubleshooting
If a fault occurs, first refer to this information before you take the digital
receiver for repair.
If you are unable to rectify the fault using the information given here, contact
your local dealer or service specialist.
Under no circumstances should you attempt to repair the digital receiver
yourself, as this will invalidate the guarantee.
PROBLEM
No function, mode
indicator not lit
No picture
No sound
Message; »Faulty
signal«
The remote control
does not work
The time is not
displayed correctly
Display »Antenna
short circuit«
POSSIBLE CAUSE
Power cord incorrectly
connected
SCART cable not properly con-
nected, incorrect settings in the
»TV Output Format« menu
The sound is muted,
the SCART cable is incorrectly
connected or the receiver
volume is set to low
The antenna is not properly
connected or positioned
No batteries are inserted, or
they are low, or the remote con-
trol is not directed at the
infrared sensor
Deviation from local time
The antenna has an excessive
current consumption or a short
circuit.
REMEDY
Connect the power cord
correctly
Connect the SCART cable
correctly, correct the menu
settings
Switch on the sound,
connect the SCART cable
correctly, turn up the
volume
Connect the antenna
correctly. Move the antenna
around to find the best
position
Insert batteries correctly,
insert new batteries, align
remote control with the
infrared sensor
Correct the difference
Switch off/unplug the
device immediately. Unplug
the antenna and set the
»Active Antenna« option to
»Off« in the
»Miscellaneous« menu.