50
5 Select »Current Antenna« with »CH Ľ« or »CH Ń« and press
»ľ VOL« or »ı VOL« to select the first antenna.
Notes:
If you only have one antenna, you cannot make any changes
here.
6 Select »Satellite Name« with »CH
Ľ« or »CH Ń« and press
»ľ VOL« or »ı VOL« to select the satellite at which the
antenna is directed.
Notes:
If several antennas are connected, set »Current Antenna« to
»2« and assign this antenna to the satellites.
7 Select »LNB Type« with »CH
Ľ« or »CH Ń« and press
»ľ VOL« or »ı VOL« to enter the LNB type.
8 Select »TP« with »CH
Ľ« or »CH Ń« and press »ľ VOL« or
»ı VOL« to select the transponder.
Notes:
Press the green button to edit the transponders. Press the yellow
button to add a new transponder.
9 Select »Search Type« with »CH
Ľ« or »CH Ń« and press
»ľ VOL« or »ı VOL« to select the type of search.
Notes:
If you select »None«, no channel search is performed for the
selected satellite.
10 Select »FTA/CAS type« with »CH
Ľ« or »CH Ń« and press
»ľ VOL« or »ı VOL« to select the FTA/CAS type.
Notes:
If you select »All« or »CAS«, you can select the CAS system
after pressing the green button.
11 Select »Search Current ANT« or »Search All ANT« with »CH
Ľ« or »CH Ń« and press »OK« to start the search.
– The »Search channels« page appears.
– After the search, the following message appears: »Search
Completed Press OK«.
12 When the message »Search Completed Press OK« appears,
press »OK« and then »EXIT«.
– The menu disappears from the screen.
ANTENNA SETTINGS
__________________________________
