ENGLISH
27
ENGLISH
Radio text
Some RDS stations provide radio text as additional information. The radio
text appears as ticker text in the display.
1 To call up radio text, briefly press »TEXT«.
– The information appears after a short time.
2 For a fast run-through of the radio text, press and hold down »TEXT«.
Note:
If no radio text is provided by the current station, »NO TEXT« appears in
the display.
3 Press »TEXT« briefly to quit radio text.
Alarm mode
Alarm with signal tone
1 Press »ON/OFF« to switch off the device.
2 To set the alarm signal to signal tone (»e«), press »ON ALARM
OFF« until »e« appears in the display.
– After a short time, the display changes to the current time.
3 Briefly press »ON ALARM OFF« to check the alarm time.
– Display: the set alarm time and »e«.
– After a short time, the display changes to the current time.
– The alarm goes on with a signal tone at the set time.
Alarm with radio station
1 Press »ON/OFF« to switch on the device.
2 Press »• FM •MW •LW •SW« (right side of device) to select the
frequency band.
3 Select the desired station using the station buttons »1/6, 2/7, 3/8,
4/9, 5/10« (press once: presets 1 to 5), twice: (presets 6 to 10).
4 Adjust the alarm volume using »
– VOLUME +
« (on the right of the
device).
5 Press »ON/OFF« to switch off the device.
6 Select the radio alarm (»
ɷ
«) by pressing »ON ALARM OFF« until
»
ɷ
« appears in the display.
– After a short time, the display changes to the current time.
OPERATION
_______________________________________________
w TEXT f
RADIO TEXT E
w TEXT f
NO TEXT
e
9
:
46 TU
ɷ
21
:
55 WE
e
6
:
00 AL