ENGLISH
15
Mains operation
Note:
Check that the mains voltage on the type plate (on the bottom of the
device) corresponds to your local mains supply. If this is not the case,
contact your specialist dealer.
1 Plug the mains cable supplied into the »AC ~« socket on the device.
2 Plug the mains cable into the socket (230V~, 50/60 Hz).
Note:
If there are batteries in the device, these are switched off automatically
during mains operation.
The only way to disconnect the device from the mains supply is to pull
out the plug.
Battery operation
You can also operate the device using standard batteries (not supplied). In
this case, you must disconnect the mains power cable.
1 Open the battery compartment by pressing the area marked with arrows
on the drawing and pushing down the cover.
2 Insert four batteries (4x1.5V, Type IEC, AM 2, LR 14, C size) according
to the polarity marked on the battery compartment.
Note:
Remove the batteries when they are flat or when you know that the
device will not be used for a long period of time. When the batteries
are low, a battery symbol appears and flashes in the display. This func-
tion does not work when the power cable is plugged into the device.
No liability is accepted for damage resulting from leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, must not be
disposed of with household waste. Please dispose of used batteries in
an environmentally sound manner. Observe the legal regulations which
apply in your area.
Inserting back-up batteries
During mains operation, the back-up batteries ensure that stored settings
are not lost in the case of a power failure or when the device is briefly dis-
connected from the mains.
1 Open the battery compartment by pressing the area marked with arrows
on the drawing and pushing down the cover.
2 When inserting the batteries (micro type, e.g. AM 3, LR 6, AA size) in
the small compartment, observe the polarity marked on the compart-
ment base.
Note:
If no main batteries are inserted and there is no mains power supply,
you have approximately 10 seconds to change the back-up batteries.
POWER SUPPLY
___________________________________
