776255
7
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
GMC-I Messtechnik GmbH 7
5.4 Testing of Differential Current
during Automatic Testing per Test Standard
SECUTEST SII / SIII / SECULIFE ST:
ÐInitiate the standard-specific setup.
ÐSelect „Sequence“ and deactivate the auto-
matic test method.
During testing according to standard, a menu
appears which proposes two options, i.e. equiva-
lent leakage current and differential current.
ÐSelect „Differential current“.
SECUTEST S2N+ / S2N+10 / S2N+W:
ÐSelect switch position „active“ here.
Line voltage is applied to the DUT via the AT3-III E
tester. The differential current of the DUT is mea-
sured while allowing for a function test of the DUT.
SECUTEST PRO (or feature I01):
Ð
Select connection type AT3-adapter for IPE
measurement in the setup of the test sequence.
5.5 High-Voltage Test
Caution: High-Voltage!
Prior to performing the test remove the
probe including probe tip from sockets 4
and 5 of the SECUTEST.../SECULIFE ST.
Do not touch the DUT, the device plug
and the earthing contact cable of the
AT3-III E during the voltage test.
Do not unplug the AT3-III E connector
cable (13) from the test socket at the
SECUTEST.../SECULIFE ST: the device
under test may still be charged, and high
voltage may be present at the earthing
contact plug.
During this test, L1, L2, L3 and N (short-circuited)
are measured against PE with the preset high
voltage (max. 1.5 kV!).
Please observe all additional safety precautions
on performing the test as well as the note on the
exclusion of liability in the operating instructions of
the SECUTEST... test instrument.
6 Testing Extension Cables
The SECUTEST port (14) may remain connected
to sockets 2 and 3 at the SECUTEST.../
SECULIFE ST during this test. Perform testing in
accordance with the operating instructions
included with the SECUTEST... test instrument!
Observe the following instructions when using the
SECUTEST.../SECULIFE ST in combination with
the AT3-III E:
The test probe at the end of the probe cable of the
SECUTEST.../SECULIFE ST must first be
connected to the respective socket (15) (probe 1
to 4) of the associated plug at the AT3-III E. In
order to test, only connect the plug and socket at
the ends of the respective extension cable to be
tested to the associated device plug and socket at
the AT3-III E. The associated connection
diagrams are shown on the following pages.
SECUTEST SII / SIII / SECULIFE ST:
Select the following test sequence from the initial
window at the SECUTEST.../SECULIFE ST test
instrument:
Extension cable: “X” WITH EL1
Note!
Testing cables by means of the AT3-III E is
only possible with this setting.
SECUTEST S2N+ / S2N+10 / S2N+W:
ÐSelect the following switch position:
VDE 0701-0702
ÐSelect EL1 as connection type.
SECUTEST BASE(10)/PRO (or feature I01):
ÐSelect AT3-III E as connection type.
6.1 Measuring Protective Conductor Resistance
Testing is performed according to the instructions
included in chapter 5.1.
6.2 Measuring Insulation Resistance
L1, L2, L3 and N (short-circuited) are measured
against PE during insulation testing. Due to good
cable insulation, a value of 2 MΩ should not be
significantly exceeded.
Note!
In conductors with control lamp (usually glow
lamp in the switch), the result of the
continuity test for L and N may be distorted
by the additional resistance of the glow
lamp.
In case of doubt, we recommend performing
a continuity test for L and N by means of
resistance measurement (R-PE or R-ISO):
e. g. SECUTEST S2/ S3...: R-PE between probe
and socket 3 or R between socket 1 and 2.
SECUTEST PRO: R-PE between probe 1 and
probe 2.
SECUTEST BASE(10):
R-PE between probe 1
and measurement cable at the earth contacts
of the test socket (test type PE(PD)-P1).
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gossen Metrawatt AT3-III E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gossen Metrawatt AT3-III E in de taal/talen: Engels als bijlage per email.

De handleiding is 0.59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info