SETTING UP DISCRIMINATION part 1
Press the DISC MODE/DISC LEVEL button this will bring up two
options.
To start with highlight DISC MODE, this will allow you to set how your
Golden mask 5 will deal with the iron audio.
First option is MONO.... This will allow you to hear only non-ferrous
targets and ferrous targets will not sound off unless it's very awkward
shaped iron or big iron that many detectors cannot avoid.
But general nails and smaller iron will not sound off or just spit audio
when your Golden Mask 5 encounters them while you sweep the coil
across the ground.
Next option is TWO TONE also known as and BI-TONAL, now this
option allows your Golden Mask 5 to hear both ferrous and non-
ferrous metals but on the form of a high and low tone that you can set
up as you wish.
But as a standard TWO TONE/BI-TONAL mode will give a high tone for
non-ferrous metals and a low tone for ferrous metals.
Next option you have is ALL METAL, now this option is great for people
that want to dig every bit of metal they come across... Archaeologists
use this mode in order to get every piece of metal from the site they
are working on.
In all metal Ferrous and Non-Ferrous metals will produce the same
tone also you will achieve a little more depth in this mode normally.
