702915
7
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
7
GB
3 The Nicer Dicer Fusion in practical use
Insert the cutting top at an angle of 90° (vertically) to the cutting base in
the side slots provided. The cutting lid has an opening mechanism with 3
settings.
There are different pin blocks and a cutting stamp for the various blade
inserts to achieve the best possible cutting results.
There is an integrated pin block (A) in the cutting top. There are also two
detachable pin blocks (B) (large and small), which can be fixed in place
next to the integrated pin block.
They are fixed as follows:
There is a cross-shaped recess next to the integrated pin block. On the
back of each detachable pin block and the cutting stamp, there is a cross-
shaped mounting. Push the mounting on the pin block or cutting stamp
into the recess with gentle pressure until the block or stamp is fixed in
place and ready to use.
The automatic opening mechanism can be set by means of two pins (A) in
three positions.
Lock the protruding pins to achieve the required setting (B):
Setting 1 = pins not locked: no automatic lid opening
Setting 2 = one pin locked: slow automatic lid opening
Setting 3 = both pins locked: fast automatic lid opening
Use of the detachable pin block and cutting stamp:
Blade inserts with two different cutting surfaces (for explanation, see 3.1):
- Use of one cutting surface = integrated pin block sufces, no other insert required
- Use of both cutting surfaces = also use detachable pin block (small)
XXL blade with continuous cutting surface (for explanation, see 3.2)
- Detachable pin block (large) must also be used.
Blade insert for cutting into quarters/eighths (for explanation, see 3.3)
- Cutting stamp must also be used.
Note: The pin blocks and cutting stamp are required for the cutting process as they push the ingredients to be
cut continuously through the blades, thereby ensuring a clean cut.
A
B
B
A
3.1 Blade inserts with 2 different cutting surfaces
The blade inserts have 2 different cutting surfaces, referred to as position 1
and 2 in these Instructions for Use (see figure). Food can be cut on both sur-
faces and it is possible to cut two different ingredients at the same time. The
following should be noted in this connection:
If one of the ingredients to be cut is harder than the other, place the
harder one in position 1 (greater leverage).
If one of the ingredients to be cut is larger than the other, place it in
position 2 (longer lever travel).
Position 1
Position 2
Figure:
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Genius Nicer Dicer Fusion bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Genius Nicer Dicer Fusion in de taal/talen: Nederlands, Engels, Frans als bijlage per email.

De handleiding is 3,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Genius Nicer Dicer Fusion

Genius Nicer Dicer Fusion Recepten - Nederlands - 24 pagina's

Genius Nicer Dicer Fusion Gebruiksaanwijzing - Deutsch - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info