Light Bulb Replacement
1
To replace the bulb(s),
first disconnect the power
at the main fuse or circuit
breaker panel or pull
the plug.
2
Remove the screw at the
front of the light cover
and lower the cover.
3
Be sure the bulb(s) to be
replaced are cool before
removing. After breaking
the adhesive seal, remove
the bulb by gently turning.
Replace with the same size
and type bulb.
4
Raise the light shield
and replace the screw.
Connect electrical power
to the oven.
Replace the burned-out
bulb with a 120 volt,
40-watt incandescent
bulb (WB36X10003),
available from your
GE supplier.
Cooktop Light
1
To replace the oven light,
first disconnect the power
at the main fuse or circuit
breaker panel or pull
the plug.
2
To remove the top grille,
open the door and
remove the 3 screws on
top of the oven that hold
the grille into place. Slide
the grille to the left to
remove it.
3
Lift the metal tab on the
light cover located above
the handle.
4
After breaking the
adhesive seal, remove
the bulb by gently
turning. Replace with
the same size and type
bulb.
5
Replace the light cover.
6
Replace the grille and
screws. Connect electrical
power to the oven.
Replace the burned-out
bulb with a 120 volt,
40-watt incandescent
bulb (WB36X10003),
available from your
GE supplier.
Oven Light
Remove screw
Screws
Light cover
33
Filter housing
