813402
13
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
13
INSTALLATION INSTRUCTIONS
SITE REQUIREMENTS
4. VENTILATION
4.1 This appliance requires no additional ventilation.
5. APPLIANCE LOCATION
5.1 It is not necessary to site the appliance on a non-
combustible floor. However, for practical reasons, the floor
should be flat and solid to allow the appliance to be
levelled and secured in place.
5.2 This appliance may be situated anywhere in the room but
due consideration should be taken to ensure that it is sited
within the constraints of the allowable flue configuration.
5.3 If the appliance is to be sited against a combustible wall, a
clearance of 50mm should be allowed between the wall
and the rear of the appliance.
2.4 TOP FLUE VERTICAL OFFSET KIT (8530)
Used with kit 8524 only
A minimum rise of 500mm (191/2˝) is required to the first
bend. Refer to diagram 1C.
2.5 OPTIONAL FLUE LENGTHS & BENDS
All flue components are 150mm diameter (6")
Nominal
Length
Actual Length Stainless
Finish
Anthracite
Finish
200mm 140mm 8527 8527AN
500mm 440mm 8528 8528AN
1000mm 940mm 8529 8529AN
40° Bend N/A 8507 8507AN
90° Bend N/A 8508 8508AN
3. GAS SUPPLY
3.1 Before installation, ensure that the local distribution
conditions (identification of the type of gas and pressure)
and the adjustment of the appliance are compatible.
3.2 Ensure that the gas supply is capable of delivering the
required amount of gas and is in accordance with the rules
in force.
3.3 Soft copper tubing can be used to install the appliance. Soft
soldered joints can be used externally of the appliance.
3.4 The appliance is supplied complete with a factory fitted
isolation device incorporated into the inlet connection, no
further isolation device is required.
3.5 All supply gas pipes must be purged of any debris that may
have entered, prior to connection to the appliance.
3.6 The gas supply may enter through the floor directly under
the appliance or through the knockout panel in the rear RH
corner of the outer casing. In both instances, the front lower
panel is removable to aid connection of the gas supply and
a preformed pipe is factory fitted to make connection to the
main inlet isolation device easier.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gazco Riva Nemos Coprecci bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gazco Riva Nemos Coprecci in de taal/talen: Engels als bijlage per email.

De handleiding is 3.17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info