584001
89
Verklein
Vergroot
Pagina terug
1/124
Pagina verder
400 SERIES INSTALLATION MANUAL Page 5-7
P/N 190-00140-02 Page Rev L
OFFSET
Adjusts the lighting level up or down for any given input level. This field has a range of 0 (zero) to 99,
and is set to 50 at the factory. This may also be used to match lighting curves with other equipment in the
panel.
PHOTO TRANS % - (Photocell Transition Percentage)
When a lighting bus is used to control the lighting of the
display (see Figure 5-7), this parameter sets the point on
the lighting bus control below which the display brightness
tracks the 400 Series unit’s photocell. This field has a
range of 0 (zero) to 99, and is set to 25 at the factory.
PHOTO SLP/OFFST - (Photocell Slope/Offset)
These fields are equivalent to the SLOPE/OFFSET fields
described above, with the exception that they only control
the display lighting characteristics when the lighting bus control is below the level specified in the PHOTO
TRANS % field. Both fields have a range of 0 (zero) to 99, and are set to 50 at the factory.
CONTRAST
If contrast isn’t acceptable, place unit in Normal Mode. On
the AUX menu SETUP page 2, highlight DISPLAY and
press ENTER. The DISPLAY page is shown (see Figure
5-8). Confirm that CONTRAST MODE is “Auto”.
Highlight CONTRAST LEVEL and adjust to best
viewable color. Press ENTER to confirm change.
NOTE
Note: Leave CONTRAST MODE in “Auto”.
5.2.7 DATE/TIME SETUP Page
Select the DATE/TIME SETUP Page (see Figure 5-9).
Very infrequently, it may be desirable to set the date and
time of the 400 Series unit to aid in acquiring a GPS
position. Configuration mode is the only means by which
the date and time for the 400 Series unit may be adjusted.
Note that the time must be UTC time, and that the UTC
date may be different from the date in the local time zone.
5.2.8 MAIN DISCRETE INPUTS Page
Select the MAIN DISCRETE INPUTS Page (see Figure 5-
10) if the encoding altimeter input is used. Verify that the
DECODED ALTITUDE field indicates the correct
altitude.
EXTERNAL SWITCH STATE
Selection Verify That:
RMT CDI
The box is filled in while a remote CDI source select switch is pressed.
RMT OBS
The box is filled in while a remote OBS switch is pressed.
Figure 5-7. MAIN LIGHTING Page
(Display Lighting from Lighting Bus)
Figure 5-8.
DISPLAY Page (AUX Group)
Figure 5-9.
DATE/TIME SETUP Page
Figure 5-10.
MAIN DISCRETE INPUTS Page
89

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin GNS 430 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin GNS 430 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info