584001
88
Verklein
Vergroot
Pagina terug
1/124
Pagina verder
Page 5-6 400 SERIES INSTALLATION MANUAL
Page Rev L P/N 190-00140-02
5.2.6 MAIN LIGHTING Page
Select the MAIN LIGHTING Page (see Figure 5-6). This
page allows you to set display parameters that affect the
display backlight and key lighting brightness. The
DISPLAY and KEY lighting characteristics are adjusted
separately, each with the following fields:
LIGHTING
Shows the current level of display backlighting, based on the
lighting input source (lighting bus voltage, or the ambient
light if the source is PHOTO) and the settings on this
configuration page. This field has a range of 0 (zero) to 9999.
SOURCE
Selection Description
PHOTO
Backlight level is determined by the ambient light level as measured by the
photocell on the 400 Series unit.
14V DC
Backlight level tracks a 14 volt DC aircraft lighting bus.
28V DC
Backlight level tracks a 28 volt DC aircraft lighting bus.
5V DC
Backlight level tracks a 5 volt DC aircraft lighting bus.
5V AC
Backlight level tracks a 5 volt AC aircraft lighting bus.
NOTE
If a lighting bus (any selection other than PHOTO) is selected, and the lighting bus control is turned to its
minimum (daytime) setting, the display brightness tracks the 400 Series unit’s photocell using additional
parameters (PHOTO TRANS % and PHOTO SLP/OFFST) described below.
RESP TIME - (Response Time)
Sets the speed with which the brightness responds to the input level (bus voltage or ambient light) changes.
The higher the number the slower the display responds. This field has a range of 3 to 7, and is set to 4 at
the factory.
MIN - (Minimum)
Sets the minimum brightness of the display. The higher the number, the brighter the minimum brightness.
Display minimum brightness has a range of 35 to 999, and is set to 80 at the factory. Key minimum
brightness has a range of 20 to 99, and is set to 40 at the factory. It is prudent to verify that display and key
lighting characteristics match those of other equipment in the panel under night lighting conditions.
SLOPE
Sets the sensitivity of the display brightness in proportion to changes in the input level. The higher the
number, the brighter the display is for a given increase in the input level. This field has a range of 0 (zero)
to 99, and is set to 50 at the factory.
Figure 5-6. MAIN LIGHTING Page
88

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin GNS 430 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin GNS 430 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info