Handleiding Garmin Edge 1030 Plus (pagina 14 van 36) (Engels)

725378

Verklein

Vergroot

Pagina terug

1/36

Pagina verder

EDGE

1030 PLUS

Owner’s Manual

products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates

and supplemental information concerning the use of this product.

Garmin

, the Garmin logo, ANT+

, Auto Lap

, Auto Pause

, Edge

, Forerunner

, inReach

, and Virtual Partner

are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other

countries. Connect IQ

™

, Garmin Connect

™

, Garmin Express

™

, Varia

™

, Varia Vision

™

, and Vector

™

are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without

the express permission of Garmin.

Android

™

is a trademark of Google Inc. Apple

, iPad

, iPhone

, iPod

, and Mac

are trademarks of Apple, Inc., registered in the U.S. and other countries. The BLUETOOTH

word mark and logos

are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. The Cooper Institute

, as well as any related trademarks, are the property of The Cooper Institute.

Advanced heartbeat analytics by Firstbeat. Di2

™

and Shimano STEPS

™

are trademarks of Shimano, Inc. Shimano

is a registered trademark of Shimano, Inc. Training Stress Score

™

(TSS),

Intensity Factor

™

(IF), and Normalized Power

™

(NP) are trademarks of Peaksware, LLC. STRAVA and Strava

™

are trademarks of Strava, Inc. Wi‑Fi

is a registered trademark of Wi-Fi Alliance

Corporation. Windows

and Windows NT

are registered trademarks of Microsoft Corporation in the United States and other countries. Other trademarks and trade names are those of their

respective owners.

This product is ANT+

certified. Visit www.thisisant.com/directory for a list of compatible products and apps.

M/N: A03877

Table of Contents

Introduction.....................................................................1

Device Overview......................................................................... 1

Home Screen Overview......................................................... 1

Viewing Widgets.................................................................... 1

Using the Touchscreen.......................................................... 1

Locking the Touchscreen.................................................. 1

Pairing Your Smartphone........................................................... 1

Charging the Device................................................................... 2

About the Battery................................................................... 2

Installing the Standard Mount..................................................... 2

Installing the Out-Front Mount.................................................... 2

Releasing the Edge................................................................3

Installing the Mountain Bike Mount............................................. 3

Acquiring Satellite Signals.......................................................... 3

Training........................................................................... 3

Going for a Ride..........................................................................3

Racing a Previous Activity.......................................................... 4

Segments....................................................................................4

Strava™ Segments................................................................ 4

Using the Strava Segment Explore Widget....................... 4

Following a Segment From Garmin Connect......................... 4

Enabling Segments................................................................ 4

Racing a Segment................................................................. 4

Viewing Segment Details....................................................... 5

Segment Options................................................................... 5

Deleting a Segment............................................................... 5

Workouts.....................................................................................5

Creating a Workout................................................................ 5

Repeating Workout Steps...................................................... 5

Editing a Workout...................................................................5

Following a Workout From Garmin Connect.......................... 5

Following a Daily Suggested Workout................................... 5

Starting a Workout................................................................. 5

Stopping a Workout............................................................... 6

Deleting Workouts..................................................................6

Turning Daily Suggested Workout Prompts On and Off........ 6

Training Plans............................................................................. 6

Using Garmin Connect Training Plans...................................6

Viewing the Training Calendar............................................... 6

Interval Workouts........................................................................ 6

Creating an Interval Workout................................................. 6

Starting an Interval Workout.................................................. 6

Training Indoors.......................................................................... 6

Pairing Your ANT+® Indoor Trainer....................................... 6

Using an ANT+ Indoor Trainer............................................... 6

Setting Resistance............................................................ 7

Setting Target Power........................................................ 7

Setting a Training Target............................................................ 7

My Stats........................................................................... 7

Performance Measurements...................................................... 7

Training Status....................................................................... 7

About VO2 Max. Estimates.................................................... 8

Getting Your VO2 Max. Estimate...................................... 8

Tips for Cycling VO2 Max. Estimates................................8

Heat and Altitude Performance Acclimation..................... 8

Training Load......................................................................... 8

Getting Your Training Load Estimate................................ 8

Training Load Focus.............................................................. 8

About Training Effect............................................................. 9

Recovery Time....................................................................... 9

Viewing Your Recovery Time............................................ 9

Getting Your FTP Estimate.................................................... 9

Conducting an FTP Test................................................... 9

Automatically Calculating FTP

........................................ 10

Viewing Your Stress Score.................................................. 10

Turning Off Performance Notifications................................. 10

Viewing Your Power Curve.................................................. 10

Syncing Activities and Performance Measurements........... 10

Personal Records..................................................................... 10

Viewing Your Personal Records.......................................... 10

Reverting a Personal Record............................................... 10

Deleting a Personal Record................................................. 10

Training Zones.......................................................................... 10

Navigation..................................................................... 10

Locations.................................................................................. 10

Marking Your Location......................................................... 10

Saving Locations from the Map........................................... 10

Navigating to a Location...................................................... 10

Navigating Back to Start...................................................... 11

Stopping Navigation............................................................. 11

Editing Locations..................................................................11

Deleting a Location.............................................................. 11

Projecting a Location........................................................... 11

Courses.................................................................................... 11

Planning and Riding a Course............................................. 11

Creating and Riding a Round-Trip Course.......................... 11

Following a Course From Garmin Connect..........................12

Tips for Riding a Course...................................................... 12

Viewing Course Details........................................................ 12

Displaying a Course on the Map..................................... 12

Using ClimbPro.................................................................... 12

Course Options.................................................................... 12

Rerouting a Course.............................................................. 12

Stopping a Course............................................................... 12

Deleting a Course................................................................ 12

Trailforks Routes.................................................................. 13

Map Settings............................................................................. 13

Changing the Map Orientation............................................. 13

Route Settings.......................................................................... 13

Selecting an Activity for Route Calculation.......................... 13

Connected Features..................................................... 13

Bluetooth Connected Features................................................. 13

Incident Detection and Assistance Features....................... 13

Incident Detection........................................................... 13

Assistance....................................................................... 14

Adding Emergency Contacts...........................................14

Viewing Your Emergency Contacts.................................14

Requesting Assistance....................................................14

Turning Incident Detection On and Off........................... 14

Cancelling an Automated Message................................ 14

Sending a Status Update After an Incident..................... 14

Turning On LiveTrack.......................................................... 14

Starting a GroupTrack Session............................................ 14

Tips for GroupTrack Sessions.........................................14

Setting the Bike Alarm......................................................... 15

Playing Audio Prompts on Your Smartphone...................... 15

Transferring Files to Another Edge Device.......................... 15

Wi‑Fi Connected Features........................................................ 15

Setting Up Wi‑Fi Connectivity.............................................. 15

Wi‑Fi Settings.......................................................................15

Wireless Sensors......................................................... 15

Putting On the Heart Rate Monitor........................................... 15

Setting Your Heart Rate Zones............................................ 16

About Heart Rate Zones................................................. 16

Fitness Goals.................................................................. 16

Tips for Erratic Heart Rate Data...........................................16

Installing the Speed Sensor...................................................... 16

Installing the Cadence Sensor.................................................. 16

Table of Contents i

About the Speed and Cadence Sensors............................. 17

Data Averaging for Cadence or Power................................ 17

Pairing Your Wireless Sensors................................................. 17

Training with Power Meters...................................................... 17

Setting Your Power Zones................................................... 17

Calibrating Your Power Meter.............................................. 17

Pedal-Based Power............................................................. 17

Cycling Dynamics................................................................ 17

Using Cycling Dynamics................................................. 17

Updating the Vector Software Using the Edge Device........ 18

Situational Awareness.............................................................. 18

Using Electronic Shifters...........................................................18

Using an eBike..........................................................................18

Viewing eBike Sensor Details.............................................. 18

inReach® Remote.................................................................... 18

Using the inReach Remote.................................................. 18

History........................................................................... 18

Viewing Your Ride.................................................................... 18

Viewing Your Time in Each Training Zone.......................... 18

Deleting a Ride.................................................................... 19

Viewing Data Totals.................................................................. 19

Garmin Connect........................................................................19

Sending Your Ride to Garmin Connect............................... 19

Data Recording......................................................................... 19

Data Management.................................................................... 19

Connecting the Device to Your Computer........................... 19

Transferring Files to Your Device........................................ 19

Deleting Files....................................................................... 19

Disconnecting the USB Cable..............................................19

Customizing Your Device............................................ 20

Connect IQ Downloadable Features........................................ 20

Downloading Connect IQ Features Using Your Computer.. 20

Profiles...................................................................................... 20

Setting Up Your User Profile................................................ 20

About Training Settings............................................................ 20

Updating Your Activity Profile.............................................. 20

Adding a Data Screen.......................................................... 20

Editing a Data Screen.......................................................... 21

Rearranging Data Screens.................................................. 21

Alerts.................................................................................... 21

Setting Range Alerts....................................................... 21

Setting Recurring Alerts.................................................. 21

Setting Smart Eat and Drink Alerts................................. 21

Auto Lap...............................................................................21

Marking Laps by Position................................................ 21

Marking Laps by Distance............................................... 21

Marking Laps by Time..................................................... 21

Using Auto Sleep................................................................. 22

Using Auto Pause................................................................ 22

Using Auto Scroll................................................................. 22

Starting the Timer Automatically.......................................... 22

Changing the Satellite Setting............................................. 22

Phone Settings......................................................................... 22

System Settings........................................................................ 22

Display Settings................................................................... 22

Using the Backlight......................................................... 22

Customizing the Widget Loop.............................................. 22

Data Recording Settings...................................................... 23

Changing the Units of Measure........................................... 23

Turning the Device Tones On and Off................................. 23

Changing the Device Language.......................................... 23

Time Zones.......................................................................... 23

Setting Up Extended Display Mode.......................................... 23

Exiting Extended Display Mode........................................... 23

Device Information....................................................... 23

Product Updates

....................................................................... 23

Updating the Software Using the Garmin Connect App...... 23

Updating the Software Using Garmin Express.................... 23

Specifications............................................................................23

Edge Specifications............................................................. 23

Heart Rate Monitor Specifications....................................... 23

Speed Sensor and Cadence Sensor Specifications............ 23

Viewing Device Information...................................................... 23

Viewing Regulatory and Compliance Information................ 24

Device Care.............................................................................. 24

Cleaning the Device............................................................. 24

Caring for the Heart Rate Monitor........................................ 24

User Replaceable Batteries...................................................... 24

Replacing the Heart Rate Monitor Battery........................... 24

Replacing the Speed Sensor Battery................................... 24

Replacing the Cadence Sensor Battery............................... 24

Troubleshooting........................................................... 25

Resetting the Device.................................................................25

Restoring the Default Settings............................................. 25

Clearing User Data and Settings......................................... 25

Maximizing Battery Life.............................................................25

Turning On Battery Save Mode........................................... 25

My phone will not connect to the device................................... 25

Improving GPS Satellite Reception.......................................... 25

My device is in the wrong language......................................... 25

Setting Your Elevation.............................................................. 25

Calibrating the Compass.......................................................... 26

Temperature Readings............................................................. 26

Replacement O-rings................................................................ 26

Getting More Information.......................................................... 26

Appendix....................................................................... 26

Data Fields................................................................................26

VO2 Max. Standard Ratings..................................................... 28

FTP Ratings.............................................................................. 28

Heart Rate Zone Calculations...................................................29

Wheel Size and Circumference................................................ 29

Index.............................................................................. 30

ii Table of Contents

Introduction

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

Always consult your physician before you begin or modify any

exercise program.

Device Overview

Select to enter sleep mode and wake the device.

Hold to turn the device on and off and lock the

touchscreen.

Select to mark a new lap.

Select to start and stop the activity timer.

Electrical contacts

Charge using an Edge external battery pack

accessory.

NOTE: Go to buy.garmin.com to purchase optional accessories.

Home Screen Overview

The home screen gives you quick access to all the features of

the Edge device.

Select to go for a ride.

Use the arrows to change your activity profile.

Navigation Select to mark a location, search for locations, and create

or navigate a course.

Training Select to access your segments, workouts, and other

training options.

History Select to access your previous rides and totals.

My Stats Select to access your performance metrics, personal

records, and user profile.

Select to access connected features and settings.

Select to access your Connect IQ

™

apps, widgets, and data

fields.

Viewing Widgets

Your device is preloaded with several widgets, and more are

available when you pair your device with a smartphone or other

compatible device.

From the home screen, swipe down from the top of the

screen.

The settings widget appears. A flashing icon means the

device is searching for a signal. A solid icon means the signal

was found or the sensor is connected. You can select any

icon to change the settings.

Swipe left or right to view more widgets.

The next time you swipe down to view the widgets, the last

widget you viewed appears.

Using the Touchscreen

• When the timer is running, tap the screen to view the timer

overlay.

The timer overlay allows you to return to the home screen

during a ride.

• Select to return to the home screen.

• Swipe or select the arrows to scroll.

• Select to return to the previous page.

• Select to save your changes and close the page.

• Select to close the page and return to the previous page.

• Select to search near a location.

• Select to delete an item.

• Select for more information.

Locking the Touchscreen

You can lock the screen to prevent inadvertent screen touches.

• Hold , and select Lock Screen.

• During an activity, select .

Pairing Your Smartphone

To use the connected features of the Edge device, it must be

paired directly through the Garmin Connect

™

app, instead of

from the Bluetooth

settings on your smartphone.

From the app store on your smartphone, install and open the

Garmin Connect app.

Hold to turn on the device.

The first time you turn on the device, you will select the

device language. The next screen prompts you to pair with

your smartphone.

TIP: You can swipe down on the home screen to view the

settings widget, and select Phone > Pair Smartphone to

manually enter pairing mode.

Select an option to add your device to your Garmin Connect

account:

• If this is the first device you have paired with the Garmin

Connect app, follow the on-screen instructions.

• If you have already paired another device with the Garmin

Connect app, from the or menu, select Garmin

Devices > Add Device, and follow the on-screen

instructions.

NOTE: Based on your Garmin Connect account and

accessories, your device suggests activity profiles and data

Introduction 1

fields during setup. If you have sensors paired with your

previous device, you can transfer them during setup.

After you pair successfully, a message appears, and your device

syncs automatically with your smartphone.

Charging the Device

NOTICE

To prevent corrosion, thoroughly dry the USB port, the weather

cap, and the surrounding area before charging or connecting to

a computer.

The device is powered by a built-in lithium-ion battery that you

can charge using a standard wall outlet or a USB port on your

computer.

NOTE: The device will not charge when outside the approved

temperature range (Edge Specifications, page 23).

Pull up the weather cap from the USB port .

Plug the small end of the USB cable into the USB port on the

device.

Plug the large end of the USB cable into an AC adapter or a

computer USB port.

Plug the AC adapter into a standard wall outlet.

When you connect the device to a power source, the device

turns on.

Charge the device completely.

After you charge the device, close the weather cap.

About the Battery

WARNING

This device contains a lithium-ion battery. See the Important

Safety and Product Information guide in the product box for

product warnings and other important information.

Installing the Standard Mount

For the best GPS reception, position the bike mount so the front

of the device is oriented toward the sky. You can install the bike

mount on the stem or the handlebars.

Select a secure location to mount the device where it does

not interfere with the safe operation of your bike.

Place the rubber disk on the back of the bike mount.

Two rubber disks are included, and you can select the disk

that best fits your bike. The rubber tabs align with the back of

the bike mount so it stays in place.

Place the bike mount on the bike stem.

Attach the bike mount securely using the two bands .

Align the tabs on the back of the device with the bike mount

notches .

Press down slightly and turn the device clockwise until it

locks into place.

Installing the Out-Front Mount

NOTE: If you do not have this mount, you can skip this task.

Select a secure location to mount the Edge device where it

does not interfere with the safe operation of your bike.

Use the hex key to remove the screw from the handlebar

connector .

Place the rubber pad around the handlebar:

• If the handlebar diameter is 25.4 mm, use the thicker pad.

• If the handlebar diameter is 31.8 mm, use the thinner pad.

Place the handlebar connector around the rubber pad.

Replace and tighten the screw.

NOTE: Garmin

recommends tightening the screw so the

mount is secure, with a maximum torque specification of

7 lbf-in. (0.8 N-m). You should check the tightness of the

screw periodically.

Align the tabs on the back of the Edge device with the bike

mount notches .

2 Introduction

Press down slightly and turn the Edge device clockwise until

it locks into place.

Releasing the Edge

Turn the Edge clockwise to unlock the device.

Lift the Edge off the mount.

Installing the Mountain Bike Mount

NOTE: If you do not have this mount, you can skip this task.

Select a secure location to mount the Edge device where it

does not interfere with the safe operation of your bike.

Use the 3 mm hex key to remove the screw from the

handlebar connector .

Select an option:

• If the handlebar diameter is 25.4 mm, place the thicker

pad around the handlebar.

• If the handlebar diameter is 31.8 mm, place the thinner

pad around the handlebar.

• If the handlebar diameter is 35 mm, do not use a rubber

pad.

Place the handlebar connector around the handlebar, so that

the mount arm is above the bike stem.

Use the 3 mm hex key to loosen the screw on the mount

arm, position the mount arm, and tighten the screw.

NOTE: Garmin recommends tightening the screw so the

mount arm is secure, with a maximum torque specification of

20 lbf-in. (2.26 N-m). You should check the tightness of the

screw periodically.

If necessary, use the 2 mm hex key to remove the two

screws on the back side of the mount , remove and rotate

the connector, and replace the screws to change the

orientation of the mount.

Replace and tighten the screw on the handlebar connector.

NOTE: Garmin recommends tightening the screw so the

mount is secure, with a maximum torque specification of

7 lbf-in. (0.8 N-m). You should check the tightness of the

screw periodically.

Align the tabs on the back of the Edge device with the bike

mount notches .

Press down slightly and turn the Edge device clockwise until

it locks into place.

Acquiring Satellite Signals

The device may need a clear view of the sky to acquire satellite

signals. The time and date are set automatically based on the

GPS position.

TIP: For more information about GPS, go to www.garmin.com

/aboutGPS.

Go outdoors to an open area.

The front of the device should be oriented toward the sky.

Wait while the device locates satellites.

It may take 30–60 seconds to locate satellite signals.

Training

Going for a Ride

If you are using a wireless sensor or accessory, it can be paired

and activated during initial setup (Pairing Your Wireless

Sensors, page 17). If your device was packaged with a

wireless sensor, they are already paired and can be activated

during initial setup.

Hold to turn on the device.

Go outside, and wait while the device locates satellites.

The satellite bars turn green when the device is ready.

From the home screen, select or to select an activity

profile.

Select .

Select to start the activity timer.

Training 3

NOTE: History is recorded only while the activity timer is

running.

Swipe left or right to view additional data screens.

You can swipe down from the top of the data screens to view

the widgets.

If necessary, tap the screen to view status overlay data

(including battery life) or return to the home screen.

Select to stop the activity timer.

TIP: Before you save this ride and share it on your Garmin

Connect account, you can change the ride type. Accurate

ride type data is important for creating bike friendly courses.

Select Save Ride.

Select .

Racing a Previous Activity

You can race a previously recorded or downloaded activity.

Select Training > Race an Activity.

Select an option:

• Select Ride History to select a previously recorded

activity from your device.

• Select Saved Courses to select an activity you

downloaded from your Garmin Connect account.

Select the activity.

Select Ride.

Select to start the activity timer.

Segments

Following a segment: You can send segments from your

Garmin Connect account to your device. After a segment is

saved to your device, you can follow the segment.

NOTE: When you download a course from your Garmin

Connect account, all segments in the course are downloaded

automatically.

Racing a segment: You can race a segment, trying to match or

exceed your personal record or other cyclists who have

ridden the segment.

Strava

™

Segments

You can download Strava segments to your Edge 1030 Plus

device. Follow Strava segments to compare your performance

with your past rides, friends, and pros who have ridden the

same segment.

To sign up for a Strava membership, go to the segments widget

in your Garmin Connect account. For more information, go to

www.strava.com.

The information in this manual applies to both Garmin Connect

segments and Strava segments.

Using the Strava Segment Explore Widget

The Strava Segment Explore widget allows you to view and ride

nearby Strava segments.

From the Strava Segment Explore widget, select a segment.

Select an option:

• Select to star the segment in your Strava account.

• Select Download > Ride to download a segment to your

device and ride it.

• Select Ride to ride a downloaded segment.

Select or to view your segment times, the best times of

your friends, and the time of the segment leader.

Following a Segment From Garmin Connect

Before you can download and follow a segment from Garmin

Connect, you must have a Garmin Connect account (Garmin

Connect, page 19).

NOTE: If you are using Strava segments, your starred segments

are transferred automatically to your device when it syncs with

the Garmin Connect app.

Select an option:

• Open the Garmin Connect app.

• Go to connect.garmin.com.

Select a segment.

Select or Send to Device.

Follow the on-screen instructions.

On the Edge device, select Training > Segments.

Select the segment.

Select Ride.

Enabling Segments

You can enable segment racing and prompts that alert you to

approaching segments.

Select Training > Segments > > Enable/Disable > Edit

Multiple.

Select the segments to enable.

NOTE: Prompts alerting you to approaching segments

appear only for enabled segments.

Racing a Segment

Segments are virtual race courses. You can race a segment,

and compare your performance to past activities, other riders'

performance, connections in your Garmin Connect account, or

other members of the cycling community. You can upload your

activity data to your Garmin Connect account to view your

segment position.

NOTE: If your Garmin Connect account and Strava account are

linked, your activity is automatically sent to your Strava account

so you can review the segment position.

Select to start the activity timer, and go for a ride.

When your path crosses an enabled segment, you can race

the segment.

Start racing the segment.

The segment data screen appears automatically.

4 Training

If necessary, use the arrows to change your goal during your

race.

You can race against the segment leader, your past

performance, or other riders (if applicable). The goal

automatically adjusts based on your current performance.

A message appears when the segment is complete.

Viewing Segment Details

Select Training > Segments.

Select a segment.

Select an option:

• Select Map to view the segment on the map.

• Select Elevation to view an elevation plot of the segment.

• Select Leaderboard to view the ride times and average

speeds for the segment leader, group leader or

challenger, your personal best time and average speed,

and other riders (if applicable).

TIP: You can select a leaderboard entry to change your

segment race goal.

Segment Options

Select Training > Segments > .

Turn Guidance: Enables or disables turn prompts.

Auto Select Effort: Enables or disables automatic goal

adjustment based on your current performance.

Search: Allows you to search for saved segments by name.

Enable/Disable: Enables or disables the segments currently

loaded on the device.

Default Leader Priority: Allows you to select the order for goal

targets while racing a segment.

Delete: Allows you to delete all or multiple saved segments from

the device.

Deleting a Segment

Select Training > Segments.

Select a segment.

Select > .

Workouts

You can create custom workouts that include goals for each

workout step and for varied distances, times, and calories. You

can create workouts using Garmin Connect, and transfer them

to your device. You can also create and save a workout directly

on your device.

You can schedule workouts using Garmin Connect. You can

plan workouts in advance and store them on your device.

Creating a Workout

Select Training > Workouts > Create New.

Enter a workout name, and select .

Select Add New Step.

Select the type of workout step.

For example, select Rest to use the step as a rest lap.

During a rest lap, the timer continues to run and data is

recorded.

Select the workout step duration.

For example, select Distance to end the step after a specific

distance.

If necessary, enter a custom value for the duration.

Select the workout step target type.

For example, select Heart Rate Zone to maintain a consistent

heart rate during the step.

If necessary, select a target zone or enter a custom range.

For example, you can select a heart rate zone. Each time you

exceed or drop below the specified heart rate, the device

beeps and displays a message.

Select to save the step.

Select Add New Step to add additional steps to the workout.

Select to save the workout.

Repeating Workout Steps

Before you can repeat a workout step, you must create a

workout with at least one step.

Select Add New Step.

Select an option:

• Select Repeat to repeat a step one or more times. For

example, you can repeat a 5-mile step ten times.

• Select Repeat Until to repeat a step for a specific

duration. For example, you can repeat a 5-mile step for 60

minutes or until your heart rate reaches 160 bpm.

Select Back To Step, and select a step to repeat.

Select to save the step.

Editing a Workout

Select Training > Workouts.

Select a workout.

Select .

Select a step, and select Edit Step.

Change the step attributes, and select .

Select to save the workout.

Following a Workout From Garmin Connect

Before you can download a workout from Garmin Connect, you

must have a Garmin Connect account (Garmin Connect,

page 19).

Select an option:

• Open the Garmin Connect app.

• Go to connect.garmin.com.

Select Training > Workouts.

Find a workout, or create and save a new workout.

Select or Send to Device.

Follow the on-screen instructions.

Following a Daily Suggested Workout

You must ride with heart rate and power for one week to get

workout recommendations.

Select Training > Workouts > Daily Suggested Workout.

Select the workout.

Select Do Workout.

Starting a Workout

Select Training > Workouts.

Select a workout.

Training 5

Select Ride.

Select to start the activity timer.

After you begin a workout, the device displays each step of the

workout, the target (if any), and current workout data. An audible

alarm sounds when you are about to finish a workout step. A

message appears, counting down the time or distance until a

new step begins.

Stopping a Workout

• At any time, select to end a workout step and begin the

next step.

• At any time, swipe up from the bottom of the screen, and

select Restart Step to end a workout step and restart it.

• At any time, select to stop the activity timer.

• At any time, swipe down from the top of the screen, and on

the controls widget, select Stop Workout > to end the

workout.

Deleting Workouts

Select Training > Workouts > > Delete Multiple.

Select one or more workouts.

Select .

Turning Daily Suggested Workout Prompts On and

Off

Daily suggested workouts are recommended based on your

previous activities saved to your Garmin Connect account.

Select Training > Workouts > Daily Suggested Workout >

Select Enable.

Training Plans

You can set up a training plan in your Garmin Connect account

and send the training plan workouts to your device. All

scheduled workouts sent to the device appear in the training

calendar.

Using Garmin Connect Training Plans

Before you can download and use a training plan from Garmin

Connect, you must have a Garmin Connect account (Garmin

Connect, page 19).

You can browse Garmin Connect to find a training plan, and

schedule workouts and courses.

Connect the device to your computer.

Go to connect.garmin.com.

Select and schedule a training plan.

Review the training plan in your calendar.

Select an option:

• Sync your device with the Garmin Express

™

application on

your computer.

• Sync your device with the Garmin Connect app on your

smartphone.

Viewing the Training Calendar

When you select a day in the training calendar, you can view or

start the workout. You can also view saved rides.

Select Training > Training Plan.

Select .

Select a day to view a scheduled workout or a saved ride.

Interval Workouts

You can create interval workouts based on distance or time. The

device saves your custom interval workout until you create

another interval workout. You can use open intervals when you

are riding a known distance. When you select , the device

records an interval and moves to a rest interval.

Creating an Interval Workout

Select Training > Intervals > Edit > Intervals > Type.

Select an option.

TIP: You can create an open-ended interval by setting the

type to Open.

If necessary, enter a high and low value for the interval.

Select Duration, enter a time interval value, and select .

Select .

Select Rest > Type.

Select an option.

If necessary, enter a high and low value for the rest interval.

Select Duration, enter time value for the rest interval, and

select .

Select .

Select one or more options:

• To set the number of repetitions, select Repeat.

• To add an open-ended warm up to your workout, select

Warm Up > On.

• To add an open-ended cool down to your workout, select

Cool Down > On.

Starting an Interval Workout

Select Training > Intervals > Do Workout.

Select to start the activity timer.

When your interval workout has a warm up, select to

begin the first interval.

Follow the on-screen instructions.

When you complete all of the intervals, a message appears.

Training Indoors

The device includes an indoor activity profile where GPS is

turned off. When GPS is turned off, speed and distance are not

available unless you have a compatible sensor or indoor trainer

that sends speed and distance data to the device.

Pairing Your ANT+

Indoor Trainer

Bring the device within 3 m (10 ft.) of the ANT+ indoor trainer.

Select Training > Indoor Trainer > Pair ANT+ Bike Trainer.

Select the indoor trainer to pair with your device.

Select Add.

When the indoor trainer is paired with your device, the indoor

trainer appears as a connected sensor. You can customize

your data fields to display sensor data.

Using an ANT+ Indoor Trainer

Before you can use a compatible ANT+ indoor trainer, you must

mount your bike on the trainer and pair it with your device

(Pairing Your ANT+

Indoor Trainer, page 6).

You can use your device with an indoor trainer to simulate

resistance while following a course, activity, or workout. While

using an indoor trainer, GPS is turned off automatically.

Select Training > Indoor Trainer.

Select an option:

• Select Follow a Course to follow a saved course

(Courses, page 11).

• Select Follow an Activity to follow a saved ride (Going for

a Ride, page 3).

• Select Follow a Workout to follow a saved workout

(Workouts, page 5).

Select a course, activity, or workout.

Select Ride.

Select to start the activity timer.

6 Training

The trainer increases or decreases resistance based on the

elevation information in the course or ride.

Setting Resistance

Select Training > Indoor Trainer > Set Resistance.

Set the resistance force applied by the trainer.

Select to start the activity timer.

If necessary, select or to adjust the resistance during

your activity.

Setting Target Power

Select Training > Indoor Trainer > Set Target Power.

Set the target power value.

Select to start the activity timer.

The resistance force applied by the trainer is adjusted to

maintain a constant power output based on your speed.

If necessary, select or to adjust the target power during

your activity.

Setting a Training Target

The training target feature works with the Virtual Partner

feature

so you can train toward a set distance, distance and time, or

distance and speed goal. During your training activity, the device

gives you real-time feedback about how close you are to

achieving your training target.

Select Training > Set a Target.

Select an option:

• Select Distance Only to select a preset distance or enter

a custom distance.

• Select Distance and Time to select a distance and time

target.

• Select Distance and Speed to select a distance and

speed target.

The training target screen appears, indicating your estimated

finish time. The estimated finish time is based on your current

performance and the time remaining.

Select .

Select to start the activity timer.

If necessary, scroll to view the Virtual Partner screen.

After you complete your activity, select > Save Ride.

My Stats

The Edge 1030 Plus device can track your personal statistics

and calculate performance measurements. Performance

measurements require a compatible heart rate monitor or power

meter.

Performance Measurements

These performance measurements are estimates that can help

you track and understand your training activities and race

performances. The measurements require a few activities using

wrist-based heart rate or a compatible chest heart rate monitor.

Cycling performance measurements require a heart rate monitor

and a power meter.

These estimates are provided and supported by Firstbeat. For

more information, go to www.garmin.com/performance-data.

NOTE: The estimates may seem inaccurate at first. The device

requires you to complete a few activities to learn about your

performance.

Training status: Training status shows you how your training

affects your fitness and performance. Your training status is

based on changes to your training load and VO2 max. over

an extended time period.

VO2 max.: VO2 max. is the maximum volume of oxygen (in

milliliters) you can consume per minute per kilogram of body

weight at your maximum performance. Your device displays

heat and altitude corrected VO2 max. values when you are

acclimating to high heat environments or high altitude.

Training load: Training load is the sum of your excess post-

exercise oxygen consumption (EPOC) over the last 7 days.

EPOC is an estimate of how much energy it takes for your

body to recover after exercise.

Training load focus: Your device analyzes and distributes your

training load into different categories based on the intensity

and structure of each activity recorded. Training load focus

includes the total load accumulated per category, and the

focus of the training. Your device displays your load

distribution over the last 4 weeks.

Recovery time: The recovery time displays how much time

remains before you are fully recovered and ready for the next

hard workout.

Functional threshold power (FTP): The device uses your user

profile information from the initial setup to estimate your FTP.

For a more accurate rating, you can conduct a guided test.

HRV stress test: The HRV (heart rate variability) stress test

requires a Garmin chest heart rate monitor. The device

records your heart rate variability while standing still for 3

minutes. It provides your overall stress level. The scale is 1 to

100, and a lower score indicates a lower stress level.

Performance condition: Your performance condition is a real-

time assessment after 6 to 20 minutes of activity. It can be

added as a data field so you can view your performance

condition during the rest of your activity. It compares your

real-time condition to your average fitness level.

Training Status

Training status shows you how your training affects your fitness

level and performance. Your training status is based on changes

to your training load and VO2 max. over an extended time

period. You can use your training status to help plan future

training and continue improving your fitness level.

Peaking: Peaking means that you are in ideal race condition.

Your recently reduced training load is allowing your body to

recover and fully compensate for earlier training. You should

plan ahead, since this peak state can only be maintained for

a short time.

Productive: Your current training load is moving your fitness

level and performance in the right direction. You should plan

recovery periods into your training to maintain your fitness

level.

Maintaining: Your current training load is enough to maintain

your fitness level. To see improvement, try adding more

variety to your workouts or increasing your training volume.

Recovery: Your lighter training load is allowing your body to

recover, which is essential during extended periods of hard

training. You can return to a higher training load when you

feel ready.

Unproductive: Your training load is at a good level, but your

fitness is decreasing. Your body may be struggling to

recover, so you should pay attention to your overall health

including stress, nutrition, and rest.

Detraining: Detraining occurs when you are training much less

than usual for a week or more, and it is affecting your fitness

level. You can try increasing your training load to see

improvement.

Overreaching: Your training load is very high and

counterproductive. Your body needs a rest. You should give

yourself time to recover by adding lighter training to your

schedule.

My Stats 7

No Status: The device needs one or two weeks of training

history, including activities with VO2 max. results from

running or cycling, to determine your training status.

About VO2 Max. Estimates

VO2 max. is the maximum volume of oxygen (in milliliters) you

can consume per minute per kilogram of body weight at your

maximum performance. In simple terms, VO2 max. is an

indication of athletic performance and should increase as your

level of fitness improves. VO2 max. estimates are provided and

supported by Firstbeat. You can use your Garmin device paired

with a compatible heart rate monitor and power meter to display

your cycling VO2 max. estimate.

Getting Your VO2 Max. Estimate

Before you can view your VO2 max. estimate, you must put on

the heart rate monitor, install the power meter, and pair them

with your device (Pairing Your Wireless Sensors, page 17). If

your device was packaged with a heart rate monitor, the device

and sensor are already paired. For the most accurate estimate,

complete the user profile setup (Setting Up Your User Profile,

page 20), and set your maximum heart rate (Setting Your Heart

Rate Zones, page 16).

NOTE: The estimate may seem inaccurate at first. The device

requires a few rides to learn about your cycling performance.

Ride at a steady, high intensity for at least 20 minutes

outdoors.

After your ride, select Save Ride.

Select My Stats > Training Status > VO2 Max..

Your VO2 max. estimate appears as a number and position

on the color gauge.

Purple Superior

Blue Excellent

Green Good

Orange Fair

Red Poor

VO2 max. data and analysis is provided with permission from

The Cooper Institute

. For more information, see the

appendix (VO2 Max. Standard Ratings, page 28), and go to

www.CooperInstitute.org.

Tips for Cycling VO2 Max. Estimates

The success and accuracy of the VO2 max. calculation

improves when your ride is a sustained and moderately hard

effort, and where heart rate and power are not highly variable.

• Before your ride, check that your device, heart rate monitor,

and power meter are functioning properly, paired, and have

good battery life.

• During your 20 minute ride, maintain your heart rate at

greater than 70% of your maximum heart rate.

• During your 20 minute ride, maintain a fairly constant power

output.

• Avoid rolling terrain.

• Avoid riding in groups where there is a lot of drafting.

Heat and Altitude Performance Acclimation

Environmental factors such as high temperature and altitude

impact your training and performance. For example, high

altitude training can have a positive impact on your fitness, but

you may notice a temporary VO2 max. decline while exposed to

high altitudes. Your Edge 1030 Plus device provides acclimation

notifications and corrections to your VO2 max. estimate and

training status when the temperature is above 22ºC (72ºF) and

when the altitude is above 800 m (2625 ft.). You can keep track

of your heat and altitude acclimation in the training status

widget.

NOTE: The heat acclimation feature is available only for GPS

activities and requires weather data from your connected

smartphone.

Training Load

Training load is a measurement of your training volume over the

last seven days. It is the sum of your excess post-exercise

oxygen consumption (EPOC) measurements for the last seven

days. The gauge indicates whether your current load is low,

high, or within the optimal range to maintain or improve your

fitness level. The optimal range is determined based on your

individual fitness level and training history. The range adjusts as

your training time and intensity increase or decrease.

Getting Your Training Load Estimate

Before you can view your training load estimate, you must put

on the heart rate monitor, install the power meter, and pair them

with your device (Pairing Your Wireless Sensors, page 17). If

your device was packaged with a heart rate monitor, the device

and sensor are already paired. For the most accurate estimate,

complete the user profile setup (Setting Up Your User Profile,

page 20), and set your maximum heart rate (Setting Your Heart

Rate Zones, page 16).

NOTE: The estimate may seem inaccurate at first. The device

requires a few rides to learn about your cycling performance.

Ride at least once during a seven day period.

Select My Stats > Training Status > Training Load.

Your training load estimate appears as a number and

position on the color gauge.

Orange High

Green Optimal

Blue Low

Training Load Focus

In order to maximize performance and fitness gains, training

should be distributed across three categories: low aerobic, high

aerobic, and anaerobic. Training load focus shows you how

much of your training is currently in each category and provides

training targets. Training load focus requires at least 7 days of

training to determine if your training load is low, optimal, or high.

After 4 weeks of training history, your training load estimate will

have more detailed target information to help you balance your

training activities.

Below targets: Your training load is lower than optimal in all

intensity categories. Try increasing the duration or frequency

of your workouts.

Low aerobic shortage: Try adding more low aerobic activities

to provide recovery and balance for your higher intensity

activities.

High aerobic shortage: Try adding more high aerobic activities

to help improve your lactate threshold and VO2 max. over

time.

Anaerobic shortage: Try adding a few more intense, anaerobic

activities to improve your speed and anaerobic capacity over

time.

8 My Stats

Balanced: Your training load is balanced and provides all-

around fitness benefits as you continue training.

Low aerobic focus: Your training load is mostly low aerobic

activity. This provides a solid foundation and prepares you for

adding more intense workouts.

High aerobic focus: Your training load is mostly high aerobic

activity. These activities help to improve lactate threshold,

VO2 max., and endurance.

Anaerobic focus: Your training load is mostly intense activity.

This leads to rapid fitness gains, but should be balanced with

low aerobic activities.

Above targets: Your training load is higher than optimal, and

you should consider scaling back the duration and frequency

of your workouts.

About Training Effect

Training Effect measures the impact of an activity on your

aerobic and anaerobic fitness. Training Effect accumulates

during the activity. As the activity progresses, the Training Effect

value increases. Training Effect is determined by your user

profile information and training history, and heart rate, duration,

and intensity of your activity. There are seven different Training

Effect labels to describe the primary benefit of your activity.

Each label is color coded and corresponds to your training load

focus (Training Load Focus, page 8). Each feedback phrase, for

example, "Highly Impacting VO2 Max." has a corresponding

description in your Garmin Connect activity details.

Aerobic Training Effect uses your heart rate to measure how the

accumulated intensity of an exercise affects your aerobic fitness

and indicates if the workout had a maintaining or improving

effect on your fitness level. Your excess post-exercise oxygen

consumption (EPOC) accumulated during exercise is mapped to

a range of values that account for your fitness level and training

habits. Steady workouts at moderate effort or workouts involving

longer intervals (>180 sec) have a positive impact on your

aerobic metabolism and result in an improved aerobic Training

Effect.

Anaerobic Training Effect uses heart rate and speed (or power)

to determine how a workout affects your ability to perform at

very high intensity. You receive a value based on the anaerobic

contribution to EPOC and the type of activity. Repeated high-

intensity intervals of 10 to 120 seconds have a highly beneficial

impact on your anaerobic capability and result in an improved

anaerobic Training Effect.

You can add Aerobic Training Effect and Anaerobic Training

Effect as data fields to one of your training screens to monitor

your numbers throughout the activity.

Training Effect Aerobic Benefit Anaerobic Benefit

From 0.0 to 0.9 No benefit. No benefit.

From 1.0 to 1.9 Minor benefit. Minor benefit.

From 2.0 to 2.9 Maintains your aerobic

fitness.

Maintains your anaerobic

fitness.

From 3.0 to 3.9 Impacts your aerobic

fitness.

Impacts your anaerobic

fitness.

From 4.0 to 4.9 Highly impacts your

aerobic fitness.

Highly impacts your

anaerobic fitness.

5.0 Overreaching and

potentially harmful without

enough recovery time.

Overreaching and

potentially harmful without

enough recovery time.

Training Effect technology is provided and supported by

Firstbeat Technologies Ltd. For more information, go to

www.firstbeat.com.

Recovery Time

You can use your Garmin device with wrist-based heart rate or a

compatible chest heart rate monitor to display how much time

remains before you are fully recovered and ready for the next

hard workout.

NOTE: The recovery time recommendation uses your VO2 max.

estimate and may seem inaccurate at first. The device requires

you to complete a few activities to learn about your

performance.

The recovery time appears immediately following an activity.

The time counts down until it is optimal for you to attempt

another hard workout.

Viewing Your Recovery Time

Before you can use the recovery time feature, you must put on

the heart rate monitor, and pair it with your device (Pairing Your

Wireless Sensors, page 17). If your device was packaged with

a heart rate monitor, the device and sensor are already paired.

For the most accurate estimate, complete the user profile setup

(Setting Up Your User Profile, page 20), and set your

maximum heart rate (Setting Your Heart Rate Zones, page 16).

Select My Stats > Recovery > Enable.

Go for a ride.

After your ride, select Save Ride.

The recovery time appears. The maximum time is 4 days,

and the minimum time is 6 hours.

Getting Your FTP Estimate

The device uses your user profile information from the initial

setup to estimate your functional threshold power (FTP). For a

more accurate FTP value, you can conduct an FTP test using a

paired power meter and heart rate monitor (Conducting an FTP

Test, page 9).

Select My Stats > FTP.

Your FTP estimate appears as a value measured in watts per

kilogram, your power output in watts, and a position on the

color gauge.

Purple Superior

Blue Excellent

Green Good

Orange Fair

Red Untrained

For more information, see the appendix (FTP Ratings,

page 28).

Conducting an FTP Test

Before you can conduct a test to determine your functional

threshold power (FTP), you must have a paired power meter

and heart rate monitor (Pairing Your Wireless Sensors,

page 17).

Select My Stats > FTP > FTP Test > Ride.

Select to start the activity timer.

After you begin your ride, the device displays each step of

the test, the target, and current power data. A message

appears when the test is complete.

Select to stop the activity timer.

Select Save Ride.

Your FTP appears as a value measured in watts per

kilogram, your power output in watts, and a position on the

color gauge.

My Stats 9

Automatically Calculating FTP

Before the device can calculate your functional threshold power

(FTP), you must have a paired power meter and heart rate

monitor (Pairing Your Wireless Sensors, page 17).

NOTE: The estimate may seem inaccurate at first. The device

requires a few rides to learn about your cycling performance.

Select My Stats > FTP > Enable Auto Calculation.

Ride at a steady, high intensity for at least 20 minutes

outdoors.

After your ride, select Save Ride.

Select My Stats > FTP.

Your FTP appears as a value measured in watts per

kilogram, your power output in watts, and a position on the

color gauge.

Viewing Your Stress Score

Before you can view your stress score, you must put on a chest

heart rate monitor and pair it with your device (Pairing Your

Wireless Sensors, page 17).

Stress score is the result of a three-minute test performed while

standing still, where the Edge device analyzes heart rate

variability to determine your overall stress. Training, sleep,

nutrition, and general life stress all impact how an athlete

performs. The stress score range is 1 to 100, where 1 is a very

low stress state, and 100 is a very high stress state. Knowing

your stress score can help you decide if your body is ready for a

tough workout or yoga.

TIP: Garmin recommends that you measure your stress score at

approximately the same time and under the same conditions

every day.

Select My Stats > Stress Score > Measure.

Stand still, and rest for 3 minutes.

Turning Off Performance Notifications

Performance notifications are turned on by default. Some

performance notifications are alerts that appear upon completion

of your activity. Some performance notifications appear during

an activity or when you achieve a new performance

measurement, such as a new VO2 max. estimate.

Select My Stats > Performance Notifications.

Select an option.

Viewing Your Power Curve

Before you can view your power curve, you must pair your

power meter with your device (Pairing Your Wireless Sensors,

page 17).

The power curve displays your sustained power output over

time. You can view your power curve for the previous month,

three months, or twelve months.

Select My Stats > Power Curve.

Select or to select a time period.

Syncing Activities and Performance Measurements

You can sync activities and performance measurements from

other Garmin devices to your Edge 1030 Plus device using your

Garmin Connect account. This allows your device to more

accurately reflect your training status and fitness. For example,

you can record a run with a Forerunner

device, and view your

activity details and overall training load on your Edge 1030 Plus

device.

Select My Stats > Training Status.

Select > Physio TrueUp.

When you sync your device with your smartphone, recent

activities and performance measurements from your other

Garmin devices appear on your Edge 1030 Plus device.

Personal Records

When you complete a ride, the device displays any new

personal records you achieved during that ride. Personal

records include your fastest time over a standard distance,

longest ride, and most ascent gained during a ride. When paired

with a compatible power meter, the device displays the

maximum power reading recorded during a 20-minute period.

Viewing Your Personal Records

Select My Stats > Personal Records.

Reverting a Personal Record

You can set each personal record back to the one previously

recorded.

Select My Stats > Personal Records.

Select a record to revert.

Select Previous Record > .

NOTE: This does not delete any saved activities.

Deleting a Personal Record

Select My Stats > Personal Records.

Select a personal record.

Select > .

Training Zones

• Heart rate zones (Setting Your Heart Rate Zones, page 16)

• Power zones (Setting Your Power Zones, page 17)

Navigation

Navigation features and settings also apply to navigating

courses (Courses, page 11) and segments (Segments,

page 4).

• Locations and finding places (Locations, page 10)

• Planning a course (Courses, page 11)

• Route settings (Route Settings, page 13)

• Map settings (Map Settings, page 13)

Locations

You can record and store locations in the device.

Marking Your Location

Before you can mark a location, you must locate satellites.

If you want to remember landmarks or return to a certain spot,

you can mark a location.

Go for a ride.

Select Navigation > > Mark Location > .

Saving Locations from the Map

Select Navigation > Browse Map.

Browse the map for the location.

Select the location.

Location information appears at the top of the map.

Select the location information.

Select > .

Navigating to a Location

Select Navigation.

Select an option:

• Select Browse Map to navigate to a location on the map.

• Select Search to navigate to a point of interest, city,

address, intersection, or known coordinates.

TIP: You can select to narrow your search area.

• Select Saved Locations to navigate to a saved location.

10 Navigation

TIP: You can select to enter specific search

information.

• Select Recent Finds to navigate to one of the last 50

locations you have found.

• Select > Select Search Area to narrow your search

area.

Select a location.

Select Ride.

Follow the on-screen instructions to your destination.

Navigating Back to Start

At any point during your ride, you can return to the starting point.

Go for a ride.

At any time, swipe down from the top of the screen, and on

the controls widget, select Back to Start.

Select Along Same Route or Most Direct Route.

Select Ride.

The device navigates you back to the starting point of your

ride.

Stopping Navigation

Scroll to the map.

Select > .

Editing Locations

Select Navigation > Saved Locations.

Select a location.

Select the information bar at the top of the screen.

Select .

Select an attribute.

For example, select Change Elevation to enter a known

altitude for the location.

Enter the new information, and select .

Deleting a Location

Select Navigation > Saved Locations.

Select a location.

Select the location information at the top of the screen.

Select > Delete Location > .

Projecting a Location

You can create a new location by projecting the distance and

bearing from a marked location to a new location.

Select Navigation > Saved Locations.

Select a location.

Select the location information at the top of the screen.

Select > Project Location.

Enter the bearing and distance to the projected location.

Select .

Courses

You can send a course from your Garmin Connect account to

your device. After it is saved to your device, you can navigate

the course on your device. You can also create a custom course

on your device.

You can follow a saved course simply because it is a good

route. For example, you can save and follow a bike friendly

commute to work. You can also follow a saved course, trying to

match or exceed previously set performance goals.

Planning and Riding a Course

You can create and ride a custom course. A course is a

sequence of waypoints or locations that leads you to your final

destination.

Select Navigation > Courses > Course Creator > Add First

Location.

Select an option:

• To select your current location on the map, select Current

Location.

• To select a saved location, select Saved, and select a

location.

• To select a location for which you recently searched,

select Recent Finds, and select a location.

• To select a location on the map, select Use Map, and

select a location.

• To browse for and select a point of interest, select POI

Categories, and select a nearby point of interest.

• To select a city, select Cities, and select a nearby city.

• To select an address, select Addresses, and enter the

address.

• To select an intersection, select Intersections, and enter

the street names.

• To use coordinates, select Coordinates, and enter the

coordinates.

Select Use.

TIP: From the map, you can select another location, and

select Use to continue adding locations.

Select Add Next Location.

Repeat steps 2 through 4 until you have selected all locations

for the route.

Select View Map.

The device calculates your route, and a map of the route

appears.

TIP: You can select to view an elevation plot of the route.

Select Ride.

Creating and Riding a Round-Trip Course

The device can create a round-trip course based on a specified

distance, starting location, and direction of navigation.

Select Navigation > Courses > Round-Trip Course.

Select Distance, and enter the total distance for the course.

Select Start Location.

Select an option:

• To select your current location on the map, select Current

Location.

• To select a location on the map, select Use Map, and

select a location.

• To select a saved location, select Saved Locations, and

select a location.

• To browse for and select a point of interest, select Search

Tools > POI Categories, and select a nearby point of

interest.

Navigation 11

• To select a city, select Search Tools > Cities, and select

a nearby city.

• To select an address, select Search Tools > Addresses,

and enter the address.

• To select an intersection, select Search Tools >

Intersections, and enter the street names.

• To use coordinates, select Search Tools > Coordinates,

and enter the coordinates.

Select Start Direction, and select a direction heading.

Select Search.

TIP: You can select to search again.

Select a course to view it on the map.

TIP: You can select and to view the other courses.

Select Ride.

Following a Course From Garmin Connect

Before you can download a course from Garmin Connect, you

must have a Garmin Connect account (Garmin Connect,

page 19).

Select an option:

• Open the Garmin Connect app.

• Go to connect.garmin.com.

Create a new course, or select an existing course.

Select or Send to Device.

Follow the on-screen instructions.

On the Edge device, select Navigation > Courses > Saved

Courses.

Select the course.

Select Ride.

Tips for Riding a Course

• Use turn guidance (Course Options, page 12).

• If you include a warmup, select to begin the course, and

warm up as normal.

• Stay away from your course path as you warm up.

When you are ready to begin, head toward your course.

When you are on any part of the course path, a message

appears.

NOTE: As soon as you select , your Virtual Partner starts

the course and does not wait for you to warm up.

• Scroll to the map to view the course map.

If you stray from the course, a message appears.

Viewing Course Details

Select Navigation > Courses > Saved Courses.

Select a course.

Select an option:

• Select Summary to view details about the course.

• Select Map to view the course on the map.

• Select Elevation to view an elevation plot of the course.

• Select Climbs to view details and elevation plots for each

climb.

• Select Laps to select a lap and view additional information

about each lap.

Displaying a Course on the Map

For each course saved to your device, you can customize how it

appears on the map. For example, you can set your commute

course to always display on the map in yellow. You can have an

alternate course display in green. This allows you to see the

courses while you are riding, but not follow or navigate a

particular course.

Select Navigation > Courses > Saved Courses.

Select the course.

Select Settings.

Select Always Display to make the course appear on the

map.

Select Color, and select a color.

Select Course Points to include course points on the map.

The next time you ride near the course, it appears on the map.

Using ClimbPro

The ClimbPro feature helps you manage your effort for the

upcoming climbs on a course. Before your ride, you can view

details about the climbs, including when they occur, average

gradient, and total ascent. The climb categories, based on

length and gradient, are indicated by color.

Enable the ClimbPro feature for the activity profile (Updating

Your Activity Profile, page 20).

Review the climbs and course details for the course (Viewing

Course Details, page 12).

Start following a saved course (Courses, page 11).

At the start of a climb, the ClimbPro screen appears

automatically.

Course Options

Select Navigation > Courses > Saved Courses > .

Turn Guidance: Enables or disables turn prompts.

Off Course Warnings: Alerts you if you stray from the course.

Search: Allows you to search for saved courses by name.

Filter: Allows you to filter by course type, such as Strava

courses.

Sort: Allows you to sort saved courses by name, distance, or

date.

Delete: Allows you to delete all or multiple saved courses from

the device.

Rerouting a Course

You can choose how the device recalculates the route when you

go off course.

When you go off course, select an option:

• To pause navigation until you get back on course, select

Pause Navigation.

• To choose from rerouting suggestions, select Re-route.

NOTE: The first rerouting option is the shortest route back to

the course and starts automatically after 10 seconds.

Stopping a Course

Scroll to the map.

Select > .

Deleting a Course

Select Navigation > Courses > Saved Courses.

Select a course.

12 Navigation

Select > .

Trailforks Routes

With the Trailforks app, you can save your favorite trail routes or

browse for routes nearby. You can download Trailforks

mountain bike trail routes to your Edge device. Downloaded

routes appear in the saved courses list.

To sign up for a Trailforks membership, go to

www.trailforks.com.

Map Settings

Select > Activity Profiles, select a profile, and select

Navigation > Map.

Orientation: Sets how the map is shown on the page.

Auto Zoom: Automatically selects a zoom level for the map.

When Off is selected, you must zoom in or out manually.

Guide Text: Sets when the turn-by-turn navigation prompts are

shown (requires routable maps).

Map Visibility: Allows you to set advanced map features.

Map Information: Enables or disables the maps currently

loaded on the device.

Draw Contours: Shows or hides contour lines on the map.

Changing the Map Orientation

Select > Activity Profiles.

Select a profile.

Select Navigation > Map > Orientation.

Select an option:

• Select North Up to show north at the top of the page.

• Select Track Up to show your current direction of travel at

the top of the page.

• Select 3D Mode to display the map in three dimensions.

Route Settings

Select > Activity Profiles, select a profile, and select

Navigation > Routing.

Popularity Routing: Calculates routes based on the most

popular rides from Garmin Connect.

Routing Mode: Sets the transportation method to optimize your

route.

Calculation Method: Sets the method used to calculate your

route.

Lock on Road: Locks the position icon, which represents your

position on the map, onto the nearest road.

Avoidance Setup: Sets the road types to avoid while

navigating.

Recalculation: Automatically recalculates the route when you

deviate from the route.

Selecting an Activity for Route Calculation

You can set the device to calculate the route based on activity

type.

Select > Activity Profiles.

Select a profile.

Select Navigation > Routing > Routing Mode.

Select an option to calculate your route.

For example, you can select Road Cycling for on-road

navigation or Mountain Biking for off-road navigation.

Connected Features

Connected features are available for your Edge device when

you connect the device to a Wi‑Fi

network or to a compatible

smartphone using Bluetooth wireless technology.

Bluetooth Connected Features

The Edge device has several Bluetooth connected features for

your compatible smartphone using the Garmin Connect and

Connect IQ apps. Go to www.garmin.com/intosports/apps for

more information.

Activity uploads to Garmin Connect: Automatically sends

your activity to Garmin Connect as soon as you finish

recording the activity.

Assistance: Allows you to send an automated text message

with your name and GPS location to your emergency

contacts using the Garmin Connect app.

Audio prompts: Allows the Garmin Connect app to play status

announcements on your smartphone during a ride.

Bike alarm: Allows you to enable an alarm that sounds on the

device and sends an alert to your smartphone when the

device detects motion.

Connect IQ downloadable features: Allows you to download

Connect IQ features from the Connect IQ app.

Course, segment, and workout downloads from Garmin

Connect: Allows you to search for activities on Garmin

Connect using your smartphone and send them to your

device.

Device to device transfers: Allows you to wirelessly transfer

files to another compatible Edge device.

Find my Edge: Locates your lost Edge device that is paired with

your smartphone and currently within range.

GroupTrack: Allows you to keep track of other riders in your

group using LiveTrack directly on screen and in real time.

You can send preset messages to other riders in your

GroupTrack session who have a compatible Edge device.

Incident detection: Allows the Garmin Connect app to send a

message to your emergency contacts when the Edge device

detects an incident.

LiveTrack: Allows friends and family to follow your races and

training activities in real time. With LiveTrack course sharing,

you can also share your active course. You can invite

followers using email or social media, allowing them to view

your live data on a Garmin Connect tracking page.

Messages: Allows you to reply to an incoming call or text

message with a preset text message. This feature is

available with compatible Android

™

smartphones.

Notifications: Displays phone notifications and messages on

your device.

Social media interactions: Allows you to post an update to

your favorite social media website when you upload an

activity to Garmin Connect.

Weather updates: Sends real-time weather conditions and

alerts to your device.

Incident Detection and Assistance Features

Incident Detection

CAUTION

Incident detection is a supplemental feature primarily designed

for road use. Incident detection should not be relied on as a

primary method to obtain emergency assistance. The Garmin

Connect app does not contact emergency services on your

behalf.

When an incident is detected by your Edge device with GPS

enabled, the Garmin Connect app can send an automated text

message and email with your name and GPS location to your

emergency contacts.

A message appears on your device and paired smartphone

indicating your contacts will be informed after 30 seconds have

elapsed. If assistance is not needed, you can cancel the

automated emergency message.

Connected Features 13

Before you can enable incident detection on your device, you

must set up emergency contact information in the Garmin

Connect app. Your paired smartphone must be equipped with a

data plan and be in an area of network coverage where data is

available. Your emergency contacts must be able to receive text

messages (standard text messaging rates may apply).

Assistance

CAUTION

Assistance is a supplemental feature and should not be relied

on as a primary method to obtain emergency assistance. The

Garmin Connect app does not contact emergency services on

your behalf.

When your Edge device with GPS enabled is connected to the

Garmin Connect app, you can send an automated text message

with your name and GPS location to your emergency contacts.

Before you can enable the assistance feature on your device,

you must set up emergency contact information in the Garmin

Connect app. Your Bluetooth paired smartphone must be

equipped with a data plan and be in an area of network

coverage where data is available. Your emergency contacts

must be able to receive text messages (standard text messaging

rates may apply).

A message appears on your device indicating your contacts will

be informed after a countdown has elapsed. If assistance is not

needed, you can cancel the message.

Adding Emergency Contacts

Emergency contact phone numbers are used for the incident

detection and assistance features.

From the Garmin Connect app, select or .

Select Safety & Tracking > Incident Detection &

Assistance > Add Emergency Contact.

Follow the on-screen instructions.

Viewing Your Emergency Contacts

Before you can view your emergency contacts on your device,

you must set up your rider information and emergency contacts

in the Garmin Connect app.

Select > Safety & Tracking > Emergency Contacts.

Your emergency contacts' names and phone numbers

appear.

Requesting Assistance

Before you can request assistance, you must enable GPS on

your Edge device.

Hold for five seconds to activate the assistance feature.

The device beeps, and sends the message after the five-

second countdown is complete.

TIP: You can select before the countdown is complete to

cancel the message.

If necessary, select Send to send the message immediately.

Turning Incident Detection On and Off

Select > Safety & Tracking > Incident Detection.

Select the activity profile to enable incident detection.

Cancelling an Automated Message

When an incident is detected by your device, you can cancel the

automated emergency message on your device or your paired

smartphone before it is sent to your emergency contacts.

Select Cancel > before the end of the 30-second

countdown.

Sending a Status Update After an Incident

Before you can send a status update to your emergency

contacts, your device must detect an incident and send an

automated emergency message to your emergency contacts.

You can send a status update to your emergency contacts

informing them you are not in need of assistance.

Swipe down from the top of the screen, and swipe left or right

to view the controls widget.

Select Incident Detected > I'm Okay.

A message is sent to all emergency contacts.

Turning On LiveTrack

Before you can start your first LiveTrack session, you must set

up contacts in the Garmin Connect app.

Select > Safety & Tracking > LiveTrack.

Select an option:

• Select Auto Start to start a LiveTrack session each time

you start this type of activity.

• Select LiveTrack Name to update the name of your

LiveTrack session. The current date is the default name.

• Select Recipients to view recipients.

• Select Course Sharing if you want your recipients to see

your course.

Select Start LiveTrack.

Recipients can view your live data on a Garmin Connect

tracking page.

Starting a GroupTrack Session

Before you can start a GroupTrack session, you must have a

smartphone with the Garmin Connect app paired to your device

(Pairing Your Smartphone, page 1).

During a ride, you can see the riders in your GroupTrack

session on the map.

On the Edge device, select > Safety & Tracking >

GroupTrack to enable viewing connections on the map

screen.

From the Garmin Connect app, select or .

Select Safety & Tracking > LiveTrack > GroupTrack.

Select Visible to > All Connections.

NOTE: If you have more than one compatible device, you

must select a device for the GroupTrack session.

Select Start LiveTrack.

On the Edge device, select , and go for a ride.

Scroll to the map to view your connections.

You can tap an icon on the map to view location and heading

information for other riders in the GroupTrack session.

Scroll to the GroupTrack list.

You can select a rider from the list, and that rider appears

centered on the map.

Tips for GroupTrack Sessions

The GroupTrack feature allows you to keep track of other riders

in your group using LiveTrack directly on the screen. All riders in

14 Connected Features

the group must be your connections in your Garmin Connect

account.

• Ride outside using GPS.

• Pair your Edge 1030 Plus device with your smartphone using

Bluetooth technology.

• In the Garmin Connect app, select or , and select

Connections to update the list of riders for your GroupTrack

session.

• Make sure all of your connections pair to their smartphones

and start a LiveTrack session in the Garmin Connect app.

• Make sure all your connections are in range (40 km or

25 mi.).

• During a GroupTrack session, scroll to the map to view your

connections.

• Stop riding before you attempt to view location and heading

information for other riders in the GroupTrack session.

Setting the Bike Alarm

You can turn on the bike alarm when you are away from your

bike, such as on a stop during a long ride. You can control the

bike alarm from your device or the device settings in the Garmin

Connect app.

Select > Safety & Tracking > Bike Alarm.

Create or update your passcode.

When you disable the bike alarm from your Edge device, you

are prompted to enter the passcode.

Swipe down from the top of the screen, and on the controls

widget, select Set Bike Alarm.

If the device detects motion, it sounds an alarm and sends an

alert to your connected smartphone.

Playing Audio Prompts on Your Smartphone

Before you can set up audio prompts, you must have a

smartphone with the Garmin Connect app paired to your Edge

device.

You can set the Garmin Connect app to play motivational status

announcements on your smartphone during a ride or other

activity. Audio prompts include the lap number and lap time,

navigation, power, pace or speed, and heart rate data. During

an audio prompt, the Garmin Connect app mutes the primary

audio of the smartphone to play the announcement. You can

customize the volume levels on the Garmin Connect app.

From the Garmin Connect app, select or .

Select Garmin Devices.

Select your device.

Select Activity Options > Audio Prompts.

Transferring Files to Another Edge Device

You can transfer courses, segments, and workouts wirelessly

from one compatible Edge device to another using Bluetooth

technology.

Turn on both Edge devices, and bring them within range

(3 m) of each other.

From the device that contains the files, select >

Connected Features > Device Transfers > Share Files.

NOTE: The Device Transfers menu may be in a different

location for other Edge devices.

Select a file type to share.

Select one or more files to transfer.

From the device that receives the files, select >

Connected Features > Device Transfers.

Select a nearby connection.

Select one or more files to receive.

A message appears on both devices after the file transfer is

complete.

Wi‑Fi Connected Features

Activity uploads to your Garmin Connect account:

Automatically sends your activity to your Garmin Connect

account as soon as you finish recording the activity.

Software updates: Your device downloads and installs the

latest software update automatically when a Wi‑Fi connection

is available.

Workouts and training plans: You can browse for and select

workouts and training plans on the Garmin Connect site. The

next time your device has a Wi‑Fi connection, the files are

wirelessly sent to your device.

Setting Up Wi‑Fi Connectivity

You must connect your device to the Garmin Connect app on

your smartphone or to the Garmin Express application on your

computer before you can connect to a Wi‑Fi network.

Select an option:

• Download the Garmin Connect app, and pair your

smartphone (Pairing Your Smartphone, page 1).

• Go to www.garmin.com/express, and download the

Garmin Express application.

Follow the on-screen instructions to set up Wi‑Fi connectivity.

Wi‑Fi Settings

Select > Connected Features > Wi-Fi.

Wi-Fi: Enables Wi‑Fi wireless technology.

NOTE: Other Wi‑Fi settings appear only when Wi‑Fi is

enabled.

Auto Upload: Allows you to upload activities automatically over

a known wireless network.

Add Network: Connects your device to a wireless network.

Wireless Sensors

Your device can be used with wireless ANT+ or Bluetooth

sensors. For more information about compatibility and

purchasing optional sensors, go to buy.garmin.com.

Putting On the Heart Rate Monitor

NOTE: If you do not have a heart rate monitor, you can skip this

task.

You should wear the heart rate monitor directly on your skin, just

below your sternum. It should be snug enough to stay in place

during your activity.

Snap the heart rate monitor module onto the strap.

The Garmin logos on the module and the strap should be

right-side up.

Wet the electrodes and the contact patches on the back

of the strap to create a strong connection between your chest

and the transmitter.

Wrap the strap around your chest, and connect the strap

hook to the loop .

Wireless Sensors 15

NOTE: The care tag should not fold over.

The Garmin logos should be right-side up.

Bring the device within 3 m (10 ft.) of the heart rate monitor.

After you put on the heart rate monitor, it is active and sending

data.

TIP: If the heart rate data is erratic or does not appear, see the

troubleshooting tips (Tips for Erratic Heart Rate Data,

page 16).

Setting Your Heart Rate Zones

The device uses your user profile information from the initial

setup to determine your heart rate zones. You can manually

adjust the heart rate zones according to your fitness goals

(Fitness Goals, page 16). For the most accurate calorie data

during your activity, you should set your maximum heart rate,

resting heart rate, and heart rate zones.

Select My Stats > Training Zones > Heart Rate Zones.

Enter your maximum, lactate threshold, and resting heart rate

values.

You can use the auto detect feature to automatically detect

your heart rate during an activity. The zone values update

automatically, but you can also edit each value manually.

Select Based On:.

Select an option:

• Select BPM to view and edit the zones in beats per

minute.

• Select % Max. to view and edit the zones as a percentage

of your maximum heart rate.

• Select % HRR to view and edit the zones as a percentage

of your heart rate reserve (maximum heart rate minus

resting heart rate).

• Select %LTHR to view and edit the zones as a percentage

of your lactate threshold heart rate.

About Heart Rate Zones

Many athletes use heart rate zones to measure and increase

their cardiovascular strength and improve their level of fitness. A

heart rate zone is a set range of heartbeats per minute. The five

commonly accepted heart rate zones are numbered from 1 to 5

according to increasing intensity. Generally, heart rate zones are

calculated based on percentages of your maximum heart rate.

Fitness Goals

Knowing your heart rate zones can help you measure and

improve your fitness by understanding and applying these

principles.

• Your heart rate is a good measure of exercise intensity.

• Training in certain heart rate zones can help you improve

cardiovascular capacity and strength.

If you know your maximum heart rate, you can use the table

(Heart Rate Zone Calculations, page 29) to determine the best

heart rate zone for your fitness objectives.

If you do not know your maximum heart rate, use one of the

calculators available on the Internet. Some gyms and health

centers can provide a test that measures maximum heart rate.

The default maximum heart rate is 220 minus your age.

Tips for Erratic Heart Rate Data

If the heart rate data is erratic or does not appear, you can try

these tips.

• Reapply water to the electrodes and contact patches (if

applicable).

• Tighten the strap on your chest.

• Warm up for 5 to 10 minutes.

• Follow the care instructions (Caring for the Heart Rate

Monitor, page 24).

• Wear a cotton shirt or thoroughly wet both sides of the strap.

Synthetic fabrics that rub or flap against the heart rate

monitor can create static electricity that interferes with heart

rate signals.

• Move away from sources that can interfere with your heart

rate monitor.

Sources of interference may include strong electromagnetic

fields, some 2.4 GHz wireless sensors, high-voltage power

lines, electric motors, ovens, microwave ovens, 2.4 GHz

cordless phones, and wireless LAN access points.

Installing the Speed Sensor

NOTE: If you do not have this sensor, you can skip this task.

TIP: Garmin recommends you secure your bike on a stand while

installing the sensor.

Place and hold the speed sensor on top of the wheel hub.

Pull the strap around the wheel hub, and attach it to the

hook on the sensor.

The sensor may be tilted when installed on an asymmetrical

hub. This does not affect operation.

Rotate the wheel to check for clearance.

The sensor should not contact other parts of your bike.

NOTE: The LED flashes green for five seconds to indicate

activity after two revolutions.

Installing the Cadence Sensor

NOTE: If you do not have this sensor, you can skip this task.

TIP: Garmin recommends you secure your bike on a stand while

installing the sensor.

Select the band size that fits your crank arm securely.

The band you select should be the smallest one that

stretches across the crank arm.

On the non-drive side, place and hold the flat side of the

cadence sensor on the inside of the crank arm.

Pull the bands around the crank arm, and attach them to

the hooks on the sensor.

16 Wireless Sensors

Rotate the crank arm to check for clearance.

The sensor and bands should not contact any part of your

bike or shoe.

NOTE: The LED flashes green for five seconds to indicate

activity after two revolutions.

Take a 15 minute test ride and inspect the sensor and bands

to ensure there is no evidence of damage.

About the Speed and Cadence Sensors

Cadence data from the cadence sensor is always recorded. If no

speed and cadence sensors are paired with the device, GPS

data is used to calculate the speed and distance.

Cadence is your rate of pedaling or “spinning” measured by the

number of revolutions of the crank arm per minute (rpm).

Data Averaging for Cadence or Power

The non-zero data-averaging setting is available if you are

training with an optional cadence sensor or power meter. The

default setting excludes zero values that occur when you are not

pedaling.

You can change the value of this setting (Data Recording

Settings, page 23).

Pairing Your Wireless Sensors

Before you can pair, you must put on the heart rate monitor or

install the sensor.

Pairing is the connecting of ANT+ or Bluetooth wireless sensors,

for example, connecting a heart rate monitor with your Garmin

device.

Bring the device within 3 m (10 ft.) of the sensor.

NOTE: Stay 10 m (33 ft.) away from other riders' sensors

while pairing.

Select > Sensors > Add Sensor.

Select an option:

• Select a sensor type.

• Select Search All to search for all nearby sensors.

A list of available sensors appears.

Select one or more sensors to pair with your device.

Select Add.

When the sensor is paired with your device, the sensor status

is Connected. You can customize a data field to display

sensor data.

Training with Power Meters

• Go to www.garmin.com/intosports for a list of ANT+ sensors

that are compatible with your device (such as Vector

™

• For more information, see the owner's manual for your power

meter.

• Adjust your power zones to match your goals and abilities

(Setting Your Power Zones, page 17).

• Use range alerts to be notified when you reach a specified

power zone (Setting Range Alerts, page 21).

• Customize the power data fields (Adding a Data Screen,

page 20).

Setting Your Power Zones

The values for the zones are default values and may not match

your personal abilities. You can manually adjust your zones on

the device or using Garmin Connect. If you know your functional

threshold power (FTP) value, you can enter it and allow the

software to calculate your power zones automatically.

Select My Stats > Training Zones > Power Zones.

Enter your FTP value.

Select Based On:.

Select an option:

• Select watts to view and edit the zones in watts.

• Select % FTP to view and edit the zones as a percentage

of your functional threshold power.

Calibrating Your Power Meter

Before you can calibrate your power meter, you must install it,

pair it with your device, and begin actively recording data with it.

For calibration instructions specific to your power meter, see the

manufacturer's instructions.

Select > Sensors.

Select your power meter.

Select Calibrate.

Keep your power meter active by pedaling until the message

appears.

Follow the on-screen instructions.

Pedal-Based Power

Vector measures pedal-based power.

Vector measures the force you apply a few hundred times every

second. Vector also measures your cadence or rotational

pedaling speed. By measuring the force, the direction of force,

the rotation of the crank arm, and time, Vector can determine

power (watts). Because Vector independently measures left and

right leg power, it reports your left-right power balance.

NOTE: The Vector S system does not provide left-right power

balance.

Cycling Dynamics

Cycling dynamics metrics measure how you apply power

throughout the pedal stroke, and where you apply power on the

pedal, allowing you to understand your particular way of riding.

Understanding how and where you produce power allows you to

train more efficiently and evaluate your bike fit.

NOTE: You must have a compatible, dual sensing power meter

to use cycling dynamics metrics.

For more information, go to www.garmin.com/performance-data.

Using Cycling Dynamics

Before you can use cycling dynamics, you must pair the Vector

power meter with your device (Pairing Your Wireless Sensors,

page 17).

NOTE: Recording cycling dynamics uses additional device

memory.

Go for a ride.

Scroll to the cycling dynamics screen to view your power

phase data , total power , and platform center offset .

Wireless Sensors 17

If necessary, hold a data field to change it (Adding a Data

Screen, page 20).

NOTE: The two data fields at the bottom of the screen can be

customized.

You can send the ride to the Garmin Connect app to view

additional cycling dynamics data (Sending Your Ride to Garmin

Connect, page 19).

Power Phase Data

Power phase is the pedal stroke region (between the start crank

angle and the end crank angle) where you produce positive

power.

Platform Center Offset

Platform center offset is the location on the pedal platform where

you apply force.

Customizing Vector Features

Before you can customize Vector features, you must pair a

Vector power meter with your device.

Select > Sensors.

Select the Vector power meter.

Select Sensor Details > Vector Features.

Select an option.

If necessary, select the toggle switches to turn on or off

torque efficiency, pedal smoothness, and cycling dynamics.

Updating the Vector Software Using the Edge Device

Before you can update the software, you must pair your Edge

device with your Vector system.

Send your ride data to your Garmin Connect account

(Sending Your Ride to Garmin Connect, page 19).

Garmin Connect automatically looks for software updates

and sends them to your Edge device.

Bring your Edge device within range (3 m) of the sensor.

Rotate the crank arm a few times. The Edge device prompts

you to install all pending software updates.

Follow the on-screen instructions.

Situational Awareness

Your Edge device can be used with the Varia Vision

™

device,

Varia

™

smart bike lights, and rearview radar to improve

situational awareness. See the owner's manual for your Varia

device for more information.

NOTE: You may need to update the Edge software before

pairing Varia devices (Updating the Software Using Garmin

Express, page 23).

Using Electronic Shifters

Before you can use compatible electronic shifters, such as

Shimano

Di2

™

shifters, you must pair them with your device

(Pairing Your Wireless Sensors, page 17). You can customize

the optional data fields (Adding a Data Screen, page 20). The

Edge 1030 Plus device displays current adjustment values when

the sensor is in adjustment mode.

Using an eBike

Before you can use a compatible eBike, such as a Shimano

STEPS

™

eBike, you must pair it with your device (Pairing Your

Wireless Sensors, page 17). You can customize the optional

eBike data screen and data fields (Adding a Data Screen,

page 20).

Viewing eBike Sensor Details

Select > Sensors.

Select your eBike.

Select an option:

• To view eBike details, such as the odometer or travel

distance, select Sensor Details > eBike Details.

• To view eBike error messages, select .

See the eBike owner's manual for more information.

inReach

Remote

The inReach remote function allows you to control your inReach

device using your Edge device. Go to buy.garmin.com to

purchase a compatible inReach device.

Using the inReach Remote

Turn on the inReach device.

On your Edge device, select > Sensors > Add Sensor >

inReach.

Select your inReach device, and select Add.

From the home screen, swipe down, and swipe left or right to

view the inReach remote widget.

Select an option:

• To send a preset message, select > Send Preset, and

select a message from the list.

• To send a text message, select > Start Conversation,

select the message contacts, and enter the message text

or select a quick text option.

• To view the timer and distance traveled during a tracking

session, select > Start Tracking.

• To send an SOS message, select SOS.

NOTE: You should only use the SOS function in a real

emergency situation.

History

History includes time, distance, calories, speed, lap data,

elevation, and optional ANT+ sensor information.

NOTE: History is not recorded while the timer is stopped or

paused.

When the device memory is full, a message appears. The

device does not automatically delete or overwrite your history.

Upload your history to Garmin Connect periodically to keep track

of all your ride data.

Viewing Your Ride

Select History > Rides.

Select a ride.

Select an option.

Viewing Your Time in Each Training Zone

Before you can view your time in each training zone, you must

pair your device with a compatible heart rate monitor or power

meter, complete an activity, and save the activity.

Viewing your time in each heart rate and power zone can help

you adjust your training intensity. You can adjust your power

18 History

zones (Setting Your Power Zones, page 17) and your heart rate

zones (Setting Your Heart Rate Zones, page 16) to match your

goals and abilities. You can customize a data field to display

your time in training zones during your ride (Adding a Data

Screen, page 20).

Select History > Rides.

Select a ride.

Select an option:

• If your ride has data from one sensor, select Time in HR

Zone or Time in Power Zone.

• If your ride has data from both sensors, select Time in

Zone, and select Heart Rate Zones or Power Zones.

Deleting a Ride

Select History > Rides > .

Select one or more rides to delete.

Select .

Viewing Data Totals

You can view the accumulated data you have saved to the

device, including the number of rides, time, distance, and

calories.

Select History > Totals.

Garmin Connect

You can connect with your friends on Garmin Connect. Garmin

Connect gives you the tools to track, analyze, share, and

encourage each other. Record the events of your active lifestyle

including runs, walks, rides, swims, hikes, triathlons, and more.

You can create your free Garmin Connect account when you

pair your device with your phone using the Garmin Connect app,

or you can go to connect.garmin.com.

Store your activities: After you complete and save an activity

with your device, you can upload that activity to Garmin

Connect and keep it as long as you want.

Analyze your data: You can view more detailed information

about your activity, including time, distance, elevation, heart

rate, calories burned, cadence, an overhead map view, pace

and speed charts, and customizable reports.

NOTE: Some data requires an optional accessory such as a

heart rate monitor.

Plan your training: You can choose a fitness goal and load one

of the day-by-day training plans.

Share your activities: You can connect with friends to follow

each other's activities or post links to your activities on your

favorite social networking sites.

Sending Your Ride to Garmin Connect

• Sync your Edge device with the Garmin Connect app on your

smartphone.

• Use the USB cable that came with your Edge device to send

ride data to your Garmin Connect account on your computer.

Data Recording

The device uses smart recording. It records key points where

you change direction, speed, or heart rate.

When a power meter is paired, the device records points every

second. Recording points every second provides an extremely

detailed track, and uses more of the available memory.

For information about data averaging for cadence and power,

see Data Averaging for Cadence or Power, page 17.

Data Management

NOTE: The device is not compatible with Windows

95, 98, Me,

Windows NT

, and Mac

OS 10.3 and earlier.

Connecting the Device to Your Computer

NOTICE

To prevent corrosion, thoroughly dry the USB port, the weather

cap, and the surrounding area before charging or connecting to

a computer.

Pull up the weather cap from the USB port.

Plug the small end of the USB cable into the USB port.

Plug the large end of the USB cable into a computer USB

port.

Your device appears as a removable drive in My Computer

on Windows computers and as a mounted volume on Mac

computers.

Transferring Files to Your Device

Connect the device to your computer.

On Windows computers, the device appears as a removable

drive or a portable device. On Mac computers, the device

appears as a mounted volume.

NOTE: Some computers with multiple network drives may not

display device drives properly. See your operating system

documentation to learn how to map the drive.

On your computer, open the file browser.

Select a file.

Select Edit > Copy.

Open the portable device, drive, or volume for the device.

Browse to a folder.

Select Edit > Paste.

The file appears in the list of files in the device memory.

Deleting Files

NOTICE

If you do not know the purpose of a file, do not delete it. Your

device memory contains important system files that should not

be deleted.

Open the Garmin drive or volume.

If necessary, open a folder or volume.

Select a file.

Press the Delete key on your keyboard.

NOTE: If you are using an Apple

computer, you must empty

the Trash folder to completely remove the files.

Disconnecting the USB Cable

If your device is connected to your computer as a removable

drive or volume, you must safely disconnect your device from

your computer to avoid data loss. If your device is connected to

your Windows computer as a portable device, it is not necessary

to safely disconnect the device.

History 19

Complete an action:

• For Windows computers, select the Safely Remove

Hardware icon in the system tray, and select your device.

• For Apple computers, select the device, and select File >

Eject.

Disconnect the cable from your computer.

Customizing Your Device

Connect IQ Downloadable Features

You can add Connect IQ features to your device from Garmin

and other providers using the Connect IQ app.

Data Fields: Allow you to download new data fields that present

sensor, activity, and history data in new ways. You can add

Connect IQ data fields to built-in features and pages.

Widgets: Provide information at a glance, including sensor data

and notifications.

Apps: Add interactive features to your device, such as new

outdoor and fitness activity types.

Downloading Connect IQ Features Using Your

Computer

Connect the device to your computer using a USB cable.

Go to apps.garmin.com, and sign in.

Select a Connect IQ feature, and download it.

Follow the on-screen instructions.

Profiles

The Edge has several ways for you to customize the device,

including profiles. Profiles are a collection of settings that

optimize your device based on how you are using it. For

example, you can create different settings and views for training

and mountain biking.

When you are using a profile and you change settings such as

data fields or units of measurement, the changes are saved

automatically as part of the profile.

Activity Profiles: You can create activity profiles for each type

of biking. For example, you can create a separate activity

profile for training, for racing, and for mountain biking. The

activity profile includes customized data pages, activity totals,

alerts, training zones (such as heart rate and speed), training

settings (such as Auto Pause

and Auto Lap

), and navigation

settings.

User Profile: You can update your gender, age, weight, and

height settings. The device uses this information to calculate

accurate ride data.

Setting Up Your User Profile

You can update your gender, age, weight, and height settings.

The device uses this information to calculate accurate ride data.

Select My Stats > User Profile.

Select an option.

About Training Settings

The following options and settings allow you to customize your

device based on your training needs. These settings are saved

to an activity profile. For example, you can set time alerts for

your racing profile and you can set an Auto Lap position trigger

for your mountain biking profile.

Updating Your Activity Profile

You can customize ten activity profiles. You can customize your

settings and data fields for a particular activity or trip.

Select > Activity Profiles.

Select an option:

• Select a profile.

• Select Create New to add or copy a profile.

If necessary, edit the name and color for the profile.

Select an option:

• Select Data Screens to customize the data screens and

data fields (Adding a Data Screen, page 20).

• Select Default Ride Type to set the type of ride that is

typical for this activity profile, such as commuting.

TIP: After a ride that is not typical, you can manually

update the ride type. Accurate ride type data is important

for creating bike friendly courses.

• Select Segments to turn on your enabled segments

(Enabling Segments, page 4).

• Select ClimbPro to enable the ClimbPro feature (Using

ClimbPro, page 12).

• Select Alerts to customize your training alerts (Alerts,

page 21).

• Select Auto Features > Auto Lap to set how laps are

triggered (Marking Laps by Position, page 21).

• Select Auto Features > Auto Sleep to automatically enter

sleep mode after five minutes of inactivity (Using Auto

Sleep, page 22).

• Select Auto Features > Auto Pause to change when the

activity timer automatically pauses (Using Auto Pause,

page 22).

• Select Auto Features > Auto Scroll to customize the

display of the training data screens when the activity timer

is running (Using Auto Scroll, page 22).

• Select Timer Start Mode to customize how the device

detects the start of a ride and automatically starts the

activity timer (Starting the Timer Automatically, page 22).

• Select Nutrition/Hydration to enable food and drink

consumption tracking.

• Select MTB/CX > Grit/Flow/Jump Recording to enable

grit, flow, and jump recording.

• Select Navigation > Map to customize the map settings

(Map Settings, page 13).

• Select Navigation > Routing to customize the routing

settings (Route Settings, page 13).

• Select Navigation > Navigation Prompts to show

navigation messages using a map view or text prompt.

• Select Navigation > Sharp Bend Warnings to enable

navigation warning messages for difficult turns.

• Select GPS Mode to turn off GPS (Training Indoors,

page 6) or change the satellite setting (Changing the

Satellite Setting, page 22).

• Select Touch Sensitivity to change the sensitivity of the

touchscreen.

All changes are saved to the activity profile.

Adding a Data Screen

Select > Activity Profiles.

Select a profile.

Select Data Screens > Add New > Data Screen.

Select a category, and select one or more data fields.

Select .

Select an option.

• Select another category to select more data fields.

• Select .

Swipe left or right to change the layout.

Select .

20 Customizing Your Device

Select an option.

• Tap a data field, then tap another data field to rearrange

them.

• Double-tap a data field to change it.

Select .

Editing a Data Screen

Select > Activity Profiles.

Select a profile.

Select Data Screens.

Select a data screen.

Select Layout and Data Fields.

Swipe left or right to change the layout.

Select .

Select an option.

• Tap a data field, then tap another data field to rearrange

them.

• Double-tap a data field to change it.

Select .

Rearranging Data Screens

Select > Activity Profiles.

Select a profile.

Select Data Screens > .

Select a data screen.

Select or .

Select .

Alerts

You can use alerts to train toward specific time, distance,

calorie, heart rate, cadence, and power goals. Alert settings are

saved with your activity profile.

Setting Range Alerts

If you have an optional heart rate monitor, cadence sensor, or

power meter, you can set up range alerts. A range alert notifies

you when the device measurement is above or below a

specified range of values. For example, you can set the device

to alert you when your cadence is below 40 RPM and over

90 RPM. You can also use a training zone for the range alert

(Training Zones, page 10).

Select > Activity Profiles.

Select a profile.

Select Alerts.

Select Heart Rate Alert, Cadence Alert, or Power Alert.

Select the minimum and maximum values, or select zones.

Each time you exceed or drop below the specified range, a

message appears. The device also beeps if audible tones are

turned on (Turning the Device Tones On and Off, page 23).

Setting Recurring Alerts

A recurring alert notifies you each time the device records a

specified value or interval. For example, you can set the device

to alert you every 30 minutes.

Select > Activity Profiles.

Select a profile.

Select Alerts.

Select an alert type.

Turn on the alert.

Enter a value.

Select .

Each time you reach the alert value, a message appears. The

device also beeps if audible tones are turned on (Turning the

Device Tones On and Off, page 23).

Setting Smart Eat and Drink Alerts

A smart alert notifies you to eat or drink at strategic intervals

based on current ride conditions. Smart alert estimates for a ride

are based on the temperature, elevation gain, speed, duration,

and heart rate and power data (if applicable).

Select > Activity Profiles.

Select a profile.

Select Alerts.

Select Eat Alert or Drink Alert.

Turn on the alert.

Select Type > Smart.

Each time you reach the estimated smart alert value, a message

appears. The device also beeps if audible tones are turned on

(Turning the Device Tones On and Off, page 23).

Auto Lap

Marking Laps by Position

You can use the Auto Lap feature to mark the lap at a specific

position automatically. This feature is helpful for comparing your

performance over different parts of a ride (for example, a long

climb or training sprints). During courses, you can use the By

Position option to trigger laps at all of the lap positions saved in

the course.

Select > Activity Profiles.

Select a profile.

Select Auto Features > Auto Lap > Auto Lap Trigger > By

Position > Lap At.

Select an option:

• Select Lap Press Only to trigger the lap counter each

time you select and each time you pass any of those

locations again.

• Select Start and Lap to trigger the lap counter at the GPS

location where you select and at any location during

the ride where you select .

• Select Mark and Lap to trigger the lap counter at a

specific GPS location marked before the ride and at any

location during the ride where you select .

If necessary, customize the lap data fields (Adding a Data

Screen, page 20).

Marking Laps by Distance

You can use the Auto Lap feature to mark the lap at a specific

distance automatically. This feature is helpful for comparing your

performance over different parts of a ride (for example, every 10

miles or 40 kilometers).

Select > Activity Profiles.

Select a profile.

Select Auto Features > Auto Lap > Auto Lap Trigger > By

Distance > Lap At.

Enter a value.

If necessary, customize the lap data fields (Adding a Data

Screen, page 20).

Marking Laps by Time

You can use the Auto Lap feature to mark the lap at a specific

time automatically. This feature is helpful for comparing your

performance over different parts of a ride (for example, every 20

minutes).

Select > Activity Profiles.

Select a profile.

Customizing Your Device 21

Select Auto Features > Auto Lap > Auto Lap Trigger > By

Time > Lap At.

Enter a value.

If necessary, customize the lap data fields (Adding a Data

Screen, page 20).

Using Auto Sleep

You can use the Auto Sleep feature to automatically enter sleep

mode after 5 minutes of inactivity. During sleep mode, the

screen is turned off and the ANT+ sensors, Bluetooth, and GPS

are disabled.

Wi‑Fi continues to run while the device is asleep.

Select > Activity Profiles.

Select a profile.

Select Auto Features > Auto Sleep.

Using Auto Pause

You can use the Auto Pause feature to pause the timer

automatically when you stop moving or when your speed drops

below a specified value. This feature is helpful if your ride

includes stop lights or other places where you need to slow

down or stop.

NOTE: History is not recorded while the timer is stopped or

paused.

Select > Activity Profiles.

Select a profile.

Select Auto Features > Auto Pause.

Select an option:

• Select When Stopped to pause the timer automatically

when you stop moving.

• Select Custom Speed to pause the timer automatically

when your speed drops below a specified value.

If necessary, customize optional time data fields (Adding a

Data Screen, page 20).

Using Auto Scroll

You can use the Auto Scroll feature to automatically cycle

through all of the training data screens while the timer is

running.

Select > Activity Profiles.

Select a profile.

Select Auto Features > Auto Scroll.

Select a display speed.

Starting the Timer Automatically

This feature automatically detects when your device has

acquired satellites and is moving. It starts the activity timer or

reminds you to start the activity timer so you can record your

ride data.

Select > Activity Profiles.

Select a profile.

Select Timer Start Mode.

Select an option:

• Select Manual, and select to start the activity timer.

• Select Prompted to display a visual reminder when you

reach the start notice speed.

• Select Auto to start the activity timer automatically when

you reach the start speed.

Changing the Satellite Setting

For increased performance in challenging environments and

faster GPS position location, you can enable GPS + GLONASS

or GPS + GALILEO. Using GPS and another satellite together

reduces battery life more quickly than using only GPS.

Select > Activity Profiles.

Select a profile.

Select GPS Mode.

Select an option.

Phone Settings

Select > Connected Features > Phone.

Enable: Enables Bluetooth technology.

NOTE: Other Bluetooth settings appear only when Bluetooth

wireless technology is enabled.

Friendly Name: Allows you to enter a friendly name that

identifies your devices with Bluetooth technology.

Pair Smartphone: Connects your device with a compatible

Bluetooth enabled smartphone. This setting allows you to use

Bluetooth connected features, including LiveTrack and

activity uploads to Garmin Connect.

Smart Notifications: Allows you to enable phone notifications

from your compatible smartphone.

Missed Notifications: Displays missed phone notifications from

your compatible smartphone.

Text Reply Signature: Enables signatures in your text message

replies.

System Settings

Select > System.

• Display Settings (Display Settings, page 22)

• Widget Settings (Customizing the Widget Loop, page 22)

• Data Recording Settings (Data Recording Settings,

page 23)

• Unit Settings (Changing the Units of Measure, page 23)

• Tone Settings (Turning the Device Tones On and Off,

page 23)

• Language Settings (Changing the Device Language,

page 23)

Display Settings

Select > System > Display.

Auto Brightness: Automatically adjusts the backlight brightness

based on the ambient light.

Brightness: Sets the backlight brightness.

Backlight Timeout: Sets the length of time before the backlight

turns off.

Color Mode: Sets the device to display day or night colors. You

can select the Auto option to allow the device to set day or

night colors automatically based on the time of day.

Screen Capture: Allows you to save the image of the device

screen.

Using the Backlight

You can tap the touchscreen to turn on the backlight.

NOTE: You can adjust the backlight timeout (Display Settings,

page 22).

From the home screen or a data screen, swipe down from

the top of the screen.

Select an option:

• To manually adjust the brightness, select , and use the

slider bar.

• To allow the device to automatically adjust the brightness

based on the ambient light, select Auto.

Customizing the Widget Loop

You can change the order of widgets in the widget loop, remove

widgets, and add new widgets.

Select > System > Widget Management.

Select a widget to add or remove it from the widget loop.

22 Customizing Your Device

Select to change the location of a widget in the widget

loop.

Data Recording Settings

Select > System > Data Recording.

Recording Interval: Controls how the device records activity

data. The Smart option records key points where you change

direction, speed, or heart rate. The 1 Sec option records

points every second. It creates a very detailed record of your

activity and increases the size of the stored activity file.

Cadence Averaging: Controls whether the device includes zero

values for cadence data that occur when you are not

pedaling (Data Averaging for Cadence or Power, page 17).

Power Averaging: Controls whether the device includes zero

values for power data that occur when you are not pedaling

(Data Averaging for Cadence or Power, page 17).

Log HRV: Sets the device to record your heart rate variability

during an activity.

Changing the Units of Measure

You can customize units of measure for distance and speed,

elevation, temperature, weight, position format, and time format.

Select > System > Units.

Select a measurement type.

Select a unit of measure for the setting.

Turning the Device Tones On and Off

Select > System > Tones.

Changing the Device Language

Select > System > Language.

Time Zones

Each time you turn on the device and acquire satellites or sync

with your smartphone, the device automatically detects your

time zone and the current time of day.

Setting Up Extended Display Mode

You can use your Edge 1030 Plus device as an extended

display to view data screens from a compatible Garmin

multisport watch. For example, you can pair a compatible

Forerunner device to display its data screens on your Edge

device during a triathlon.

From your Edge device, select > Extended Display Mode

> Connect Watch.

From your compatible Garmin watch, select Settings >

Sensors & Accessories > Add New > Extended Display.

Follow the on-screen instructions on your Edge device and

Garmin watch to complete the pairing process.

The data screens from your paired watch appear on the Edge

device when the devices are paired.

NOTE: Normal Edge device functions are disabled while

using Extended Display mode.

After pairing your compatible Garmin watch with your Edge

device, they connect automatically the next time you use

Extended Display mode.

Exiting Extended Display Mode

While the device is in Extended Display mode, tap the

screen, and select Exit Extended Display Mode > .

Device Information

Product Updates

On your computer, install Garmin Express (www.garmin.com

/express). On your smartphone, install the Garmin Connect app.

This provides easy access to these services for Garmin devices:

• Software updates

• Map updates

• Data uploads to Garmin Connect

• Product registration

Updating the Software Using the Garmin Connect App

Before you can update your device software using the Garmin

Connect app, you must have a Garmin Connect account, and

you must pair the device with a compatible smartphone (Pairing

Your Smartphone, page 1).

Sync your device with the Garmin Connect app.

When new software is available, the Garmin Connect app

automatically sends the update to your device.

Updating the Software Using Garmin Express

Before you can update your device software, you must have a

Garmin Connect account, and you must download the Garmin

Express application.

Connect the device to your computer using the USB cable.

When new software is available, Garmin Express sends it to

your device.

Follow the on-screen instructions.

Do not disconnect your device from the computer during the

update process.

NOTE: If you have already set up your device with Wi‑Fi

connectivity, Garmin Connect can automatically download

available software updates to your device when it connects

using Wi‑Fi.

Specifications

Edge Specifications

Battery type Rechargeable, built-in lithium-ion battery

Battery life Up to 24 hr.

Operating temperature range From -20º to 60ºC (from -4º to 140ºF)

Charging temperature range From 0º to 45ºC (from 32º to 113ºF)

Wireless frequency 2.4 GHz @ 15.35 dBm nominal

Water rating IEC 60529 IPX7

Heart Rate Monitor Specifications

Battery type User-replaceable CR2032, 3 V

Battery life Up to 3.5 yr. at 1 hr./day

Water resistance 1 ATM

NOTE: This product does not transmit heart

rate data while swimming.

Operating temperature

range

From -5° to 50°C (from 23° to 122°F)

Wireless frequency/

protocol

2.4 GHz @ 2 dBm nominal

Speed Sensor and Cadence Sensor Specifications

Battery type User-replaceable CR2032, 3 V

Battery life Approximately 12 mo. at 1 hr./day

Speed sensor storage Up to 300 hr. of activity data

Operating temperature range From -20º to 60ºC (from -4º to 140ºF)

Wireless frequency/protocol 2.4 GHz @ 4 dBm nominal

Water rating IEC 60529 IPX7

Viewing Device Information

You can view device information, such as the unit ID, software

version, and license agreement.

The device withstands incidental exposure to water of up to 1 m for up to 30 min.

For more information, go to www.garmin.com/waterrating.

The device withstands pressure equivalent to a depth of 10 m. For more

information, go to www.garmin.com/waterrating.

Device Information 23

Select > System > About > Copyright Info.

Viewing Regulatory and Compliance Information

The label for this device is provided electronically. The e-label

may provide regulatory information, such as identification

numbers provided by the FCC or regional compliance markings,

as well as applicable product and licensing information.

Select .

Select System > Regulatory Info.

Device Care

NOTICE

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

Never use a hard or sharp object to operate the touchscreen, or

damage may result.

Avoid chemical cleaners, solvents, and insect repellents that can

damage plastic components and finishes.

Secure the weather cap tightly to prevent damage to the USB

port.

Avoid extreme shock and harsh treatment, because it can

degrade the life of the product.

Cleaning the Device

Wipe the device using a cloth dampened with a mild

detergent solution.

Wipe it dry.

After cleaning, allow the device to dry completely.

Caring for the Heart Rate Monitor

NOTICE

You must unsnap and remove the module before washing the

strap.

A build up of sweat and salt on the strap can decrease the ability

of the heart rate monitor to report accurate data.

• Go to www.garmin.com/HRMcare for detailed washing

instructions.

• Rinse the strap after every use.

• Machine wash the strap after every seven uses.

• Do not put the strap in a dryer.

• When drying the strap, hang it up or lay it flat.

• To prolong the life of your heart rate monitor, unsnap the

module when not in use.

User Replaceable Batteries

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

Replacing the Heart Rate Monitor Battery

Use a small Phillips screwdriver to remove the four screws on

the back of the module.

Remove the cover and battery.

Wait 30 seconds.

Insert the new battery with the positive side facing up.

NOTE: Do not damage or lose the O-ring gasket.

Replace the back cover and the four screws.

NOTE: Do not overtighten.

After you replace the heart rate monitor battery, you may need

to pair it with the device again.

Replacing the Speed Sensor Battery

The device uses one CR2032 battery. The LED flashes red to

indicate a low battery level after two revolutions.

Locate the circular battery cover on the front of the sensor.

Twist the cover counter-clockwise until the cover is loose

enough to remove.

Remove the cover and the battery .

Wait 30 seconds.

Insert the new battery into the cover, observing polarity.

NOTE: Do not damage or lose the O-ring gasket.

Twist the cover clockwise so that the marker on the cover

aligns with the marker on the case.

NOTE: The LED flashes red and green for a few seconds

after battery replacement. When the LED flashes green and

then stops flashing, the device is active and ready to send

data.

Replacing the Cadence Sensor Battery

The device uses one CR2032 battery. The LED flashes red to

indicate a low battery level after two revolutions.

Locate the circular battery cover on the back of the

sensor.

24 Device Information

Twist the cover counter-clockwise until the marker points to

unlocked and the cover is loose enough to remove.

Remove the cover and the battery .

Wait 30 seconds.

Insert the new battery into the cover, observing polarity.

NOTE: Do not damage or lose the O-ring gasket.

Twist the cover clockwise until the marker points to locked.

NOTE: The LED flashes red and green for a few seconds

after battery replacement. When the LED flashes green and

then stops flashing, the device is active and ready to send

data.

Troubleshooting

Resetting the Device

If the device stops responding, you may need to reset it. This

does not erase any of your data or settings.

Hold for 10 seconds.

The device resets and turns on.

Restoring the Default Settings

You can restore the default configuration settings and activity

profiles. This will not remove your history or activity data, such

as rides, workouts, and courses.

Select > System > Device Reset > Reset Default

Settings > .

Clearing User Data and Settings

You can clear all user data and restore the device to its initial

setup. This removes your history and data, such as rides,

workouts, and courses, and resets the device settings and

activity profiles. This will not remove any files you added to the

device from your computer.

Select > System > Device Reset > Delete Data and

Reset Settings > .

Maximizing Battery Life

• Turn on Battery Save Mode (Turning On Battery Save

Mode, page 25).

• Decrease the backlight brightness or shorten the backlight

timeout (Display Settings, page 22).

• Select the Smart recording interval (Data Recording Settings,

page 23).

• Turn on the Auto Sleep feature (Using Auto Sleep, page 22).

• Turn off the Phone wireless feature (Phone Settings,

page 22).

• Select the GPS setting (Changing the Satellite Setting,

page 22).

• Remove wireless sensors that you no longer use.

Turning On Battery Save Mode

Battery save mode adjusts the settings automatically to extend

the battery life for longer rides. During an activity, the screen

turns off. You can enable automatic alerts and tap the screen to

wake it up. Battery save mode records GPS track points and

sensor data less frequently. Speed, distance, and track data

accuracy are reduced.

NOTE: History is recorded in battery save mode when the timer

is running.

Select > Battery Save Mode > Enable.

Select the alerts that wake up the screen during an activity.

After your ride, you should charge your device and disable

battery save mode to use all the device features.

My phone will not connect to the device

If your phone will not connect to the device, you can try these

tips.

• Turn off your smartphone and your device, and turn them

back on again.

• Enable Bluetooth technology on your smartphone.

• Update the Garmin Connect app to the latest version.

• Remove your device from the Garmin Connect app and the

Bluetooth settings on your smartphone to retry the pairing

process.

• If you bought a new smartphone, remove your device from

the Garmin Connect app on the smartphone you intend to

stop using.

• Bring your smartphone within 10 m (33 ft.) of the device.

• On your smartphone, open the Garmin Connect app, select

or , and select Garmin Devices > Add Device to enter

pairing mode.

• Select > Connected Features > Phone > Pair

Smartphone.

Improving GPS Satellite Reception

• Frequently sync the device to your Garmin Connect account:

◦ Connect your device to a computer using the USB cable

and the Garmin Express application.

◦ Sync your device to the Garmin Connect app using your

Bluetooth enabled smartphone.

◦ Connect your device to your Garmin Connect account

using a Wi‑Fi wireless network.

While connected to your Garmin Connect account, the device

downloads several days of satellite data, allowing it to quickly

locate satellite signals.

• Take your device outside to an open area away from tall

buildings and trees.

• Remain stationary for a few minutes.

My device is in the wrong language

Select .

Scroll down to the last item in the list, and select it.

Scroll down to the fifth item in the list, and select it.

Select your language.

Setting Your Elevation

If you have accurate elevation data for your present location,

you can manually calibrate the altimeter on your device.

Select Navigation > > Set Elevation.

Enter the elevation, and select .

Troubleshooting 25

Calibrating the Compass

NOTICE

Calibrate the electronic compass outdoors. To improve heading

accuracy, do not stand near objects that influence magnetic

fields, such as vehicles, buildings, and overhead power lines.

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. If you experience

irregular compass behavior, for example, after moving long

distances or after extreme temperature changes, you can

manually calibrate the compass.

Select > System > Calibrate Compass.

Follow the on-screen instructions.

Temperature Readings

The device may display temperature readings that are higher

than the actual air temperature if the device is placed in direct

sunlight, held in your hand, or is charging with an external

battery pack. Also, the device will take some time to adjust to

significant changes in temperature.

Replacement O-rings

Replacement bands (O-rings) are available for the mounts.

NOTE: Use Ethylene Propylene Diene Monomer (EPDM)

replacement bands only. Go to http://buy.garmin.com, or contact

your Garmin dealer.

Getting More Information

• Go to support.garmin.com for additional manuals, articles,

and software updates.

• Go to buy.garmin.com, or contact your Garmin dealer for

information about optional accessories and replacement

parts.

Appendix

Data Fields

Some data fields require optional accessories to display data.

%FTP: The current power output as a percentage of functional

threshold power.

%Heart Rate Reserve: The percentage of heart rate reserve

(maximum heart rate minus resting heart rate).

%Max Heart Rate: The percentage of maximum heart rate.

10s Balance: The 10-second moving average of the left/right

power balance.

10s Power: The 10-second moving average of power output.

10s Watts/kg: The 10-second moving average of power output

in watts per kilogram.

30s Balance: The 30-second moving average of the left/right

power balance.

30s Power: The 30-second moving average of power output.

30s VAM: The 30-second moving average of the average

ascent velocity.

30s Watts/kg: The 30-second moving average of power output

in watts per kilogram.

3s Balance: The three-second moving average of the left/right

power balance.

3s Power: The 3-second moving average of power output.

3s Watts/kg: The 3-second moving average of power output in

watts per kilogram.

60s Flow: The 60-second moving average of the flow score.

60s Grit: The 60-second moving average of the grit score.

Aerobic Training Effect: The impact of the current activity on

your aerobic fitness level.

Anaerobic Training Effect: The impact of the current activity on

your anaerobic fitness level.

Asc. to Next Course Pt.: The remaining ascent to the next

point on the course.

Ascent Remaining: During a workout or course, the remaining

ascent when you are using an elevation target.

Assist Mode: The current eBike assistance mode.

Avg %HRR: The average percentage of heart rate reserve

(maximum heart rate minus resting heart rate) for the current

activity.

Avg %Max Heart Rate: The average percentage of maximum

heart rate for the current activity.

Avg Balance: The average left/right power balance for the

current activity.

Avg Cadence: Cycling. The average cadence for the current

activity.

Avg Heart Rate: The average heart rate for the current activity.

Avg L. Peak Pwr Phase: The average power phase peak angle

for the left leg for the current activity.

Avg Lap Time: The average lap time for the current activity.

Avg Left Pwr Phase: The average power phase angle for the

left leg for the current activity.

Avg PCO: The average platform center offset for the current

activity.

Avg Power: The average power output for the current activity.

Avg R. Peak Pwr Phase: The average power phase peak angle

for the right leg for the current activity.

Avg Right Pwr Phase: The average power phase angle for the

right leg for the current activity.

Avg Speed: The average speed for the current activity.

Avg VAM: The average ascent velocity for the current activity.

Avg Watts/kg: The average power output in watts per kilogram.

Balance: The current left/right power balance.

Battery Level: The remaining battery power.

Battery Status: The remaining battery power of a bike light

accessory.

Beam Angle Status: The headlight beam mode.

Cadence: Cycling. The number of revolutions of the crank arm.

Your device must be connected to a cadence accessory for

this data to appear.

Cadence Bars: A bar graph showing your current, average, and

maximum cycling cadence values for the current activity.

Cadence Graph: A line graph showing your cycling cadence

values for the current activity.

Calories: The amount of total calories burned.

Calories to Go: During a workout, the remaining calories when

you are using a calorie target.

Course Pt. Distance: The remaining distance to the next point

on the course.

Destination Location: The last point on the route or course.

Di2 Battery Level: The remaining battery power of a Di2

sensor.

Di2 Shift Mode: The current shift mode of a Di2 sensor.

Distance: The distance traveled for the current track or activity.

Distance Ahead: The distance ahead or behind the Virtual

Partner.

Distance to Destination: The remaining distance to the final

destination. You must be navigating for this data to appear.

26 Appendix

Distance to Go: During a workout or course, the remaining

distance when you are using a distance target.

Distance to Next: The remaining distance to the next waypoint

on the route. You must be navigating for this data to appear.

Duration: The time remaining for the current workout step.

eBike Battery: The remaining battery power of an eBike.

Elapsed Time: The total time recorded. For example, if you start

the timer and run for 10 minutes, then stop the timer for 5

minutes, then start the timer and run for 20 minutes, your

elapsed time is 35 minutes.

Elevation: The altitude of your current location above or below

sea level.

Elevation Graph: A line graph showing your current elevation,

total ascent, and total descent for the current activity.

EPOC: The amount of excess post-exercise oxygen

consumption (EPOC) for the current activity. EPOC indicates

the strenuousness of your workout.

ETA at Destination: The estimated time of day when you will

reach the final destination (adjusted to the local time of the

destination). You must be navigating for this data to appear.

ETA at Next: The estimated time of day when you will reach the

next waypoint on the route (adjusted to the local time of the

waypoint). You must be navigating for this data to appear.

Flow: The measurement of how consistently you maintain

speed and smoothness through turns in the current activity.

Front Gear: The front bike gear from a gear position sensor.

Gear Battery: The battery status of a gear position sensor.

Gear Combo: The current gear combination from a gear

position sensor.

Gear Ratio: The number of teeth on the front and rear bike

gears, as detected by a gear position sensor.

Gears: The front and rear bike gears from a gear position

sensor.

GPS Signal Strength: The strength of the GPS satellite signal.

Grade: The calculation of rise (elevation) over run (distance).

For example, if for every 3 m (10 ft.) you climb you travel

60 m (200 ft.), the grade is 5%.

Grit: The measurement of difficulty for the current activity based

on elevation, gradient, and rapid changes in direction.

Heading: The direction you are moving.

Heart Rate: Your heart rate in beats per minute (bpm). Your

device must be connected to a compatible heart rate monitor.

Heart Rate Bars: A bar graph showing your current, average,

and maximum heart rate values for the current activity.

Heart Rate Graph: A line graph showing your current, average,

and maximum heart rate values for the current activity.

Heart Rate to Go: During a workout, the amount you are above

or below the heart rate target.

Heart Rate Zone: The current range of your heart rate (1 to 5).

The default zones are based on your user profile and

maximum heart rate (220 minus your age).

HR Zone Graph: A line graph showing your current heart rate

zone (1 to 5).

Intensity Factor: The Intensity Factor

™

for the current activity.

Kilojoules: The accumulated work performed (power output) in

kilojoules.

Lap %HRR: The average percentage of heart rate reserve

(maximum heart rate minus resting heart rate) for the current

lap.

Lap %Max Heart Rate: The average percentage of maximum

heart rate for the current lap.

Lap Balance: The average left/right power balance for the

current lap.

Lap Cadence: Cycling. The average cadence for the current

lap.

Lap Distance: The distance traveled for the current lap.

Lap Flow: The overall flow score for the current lap.

Lap Grit: The overall grit score for the current lap.

Lap Heart Rate: The average heart rate for the current lap.

Lap L. Peak Pwr Phase: The average power phase peak angle

for the left leg for the current lap.

Lap Left Pwr Phase: The average power phase angle for the

left leg for the current lap.

Lap NP: The average Normalized Power for the current lap.

Lap PCO: The average platform center offset for the current lap.

Lap Power: The average power output for the current lap.

Lap R. Peak Pwr Phase: The average power phase peak angle

for the right leg for the current lap.

Lap Right Pwr Phase: The average power phase angle for the

right leg for the current lap.

Laps: The number of laps completed for the current activity.

Lap Speed: The average speed for the current lap.

Lap Time: The stopwatch time for the current lap.

Lap Time Seated: The time spent seated while pedaling for the

current lap.

Lap Time Standing: The time spent standing while pedaling for

the current lap.

Lap VAM: The average ascent velocity for the current lap.

Lap Watts/kg: The average power output in watts per kilogram

for the current lap.

Last Lap Distance: The distance traveled for the last completed

lap.

Last Lap Heart Rate: The average heart rate for the last

completed lap.

Last Lap NP: The average Normalized Power for the last

completed lap.

Last Lap Power: The average power output for the last

completed lap.

Last Lap Speed: The average speed for the last completed lap.

Last Lap Time: The stopwatch time for the last completed lap.

Left Peak Pwr Phase: The current power phase peak angle for

the left leg. Power phase peak is the angle range over which

the rider produces the peak portion of the driving force.

Left Power Phase: The current power phase angle for the left

leg. Power phase is the pedal stroke region where positive

power is produced.

Light Mode: The light network configuration mode.

Lights Connected: The number of connected lights.

Max Lap Power: The top power output for the current lap.

Max Power: The top power output for the current activity.

Max Speed: The top speed for the current activity.

Next Point Location: The next point on the route or course.

Normalized Power: The Normalized Power

™

for the current

activity.

Odometer: A running tally of distance traveled for all trips. This

total does not clear when resetting the trip data.

Pedal Smoothness: The measurement of how evenly a rider is

applying force to the pedals throughout each pedal stroke.

Performance Condition: The performance condition score is a

real-time assessment of your ability to perform.

Platform Center Offset: The platform center offset. Platform

center offset is the location on the pedal platform where force

is applied.

Appendix 27

Power: The current power output in watts. Your device must be

connected to a compatible power meter.

Power Bars: A bar graph showing your current, average, and

maximum power output values for the current activity.

Power Graph: A line graph showing your current, average, and

maximum power output values for the current activity.

Power Zone: The current range of power output (1 to 7) based

on your FTP or custom settings.

Rear Gear: The rear bike gear from a gear position sensor.

Reps to Go: During a workout, the remaining repetitions.

Respiration Rate: Your respiration rate in breaths per minute

(brpm).

Right Peak Pwr Phase: The current power phase peak angle

for the right leg. Power phase peak is the angle range over

which the rider produces the peak portion of the driving force.

Right Power Phase: The current power phase angle for the

right leg. Power phase is the pedal stroke region where

positive power is produced.

Shifting Advice: The recommendation to shift up or down

based on your current effort. Your eBike must be in manual

shifting mode.

Speed: The current rate of travel.

Speed Bars: A bar graph showing your current, average, and

maximum speed values for the current activity.

Speed Graph: A line graph showing your speed for the current

activity.

Step Time: The time elapsed for the current workout step.

Sunrise: The time of sunrise based on your GPS position.

Sunset: The time of sunset based on your GPS position.

Target: During a workout, the target for the workout step.

Target Power: The target power output during an activity.

Temperature: The temperature of the air. Your body

temperature affects the temperature sensor.

Time Ahead: The time ahead or behind the Virtual Partner.

Time in Zone: The time elapsed in each heart rate or power

zone.

Time of Day: The time of day based on your current location

and time settings (format, time zone, daylight saving time).

Timer: The stopwatch time for the current activity.

Time Seated: The time spent seated while pedaling for the

current activity.

Time Standing: The time spent standing while pedaling for the

current activity.

Time to Destination: The estimated time remaining before you

reach the destination. You must be navigating for this data to

appear.

Time to Go: During a workout or course, the remaining time

when you are using a time target.

Time to Next: The estimated time remaining before you reach

the next waypoint in the route. You must be navigating for

this data to appear.

Torque Effectiveness: The measurement of how efficiently a

rider is pedaling.

Total Ascent: The total elevation distance ascended since the

last reset.

Total Descent: The total elevation distance descended since

the last reset.

Trainer Resistance: The resistance force applied by an indoor

trainer.

Travel Range: The estimated distance you can travel based on

the current eBike settings and remaining battery power.

TSS: The Training Stress Score

™

for the current activity.

VAM: The average ascent velocity for the current activity.

Watts/kg: The amount of power output in watts per kilogram.

Workout Comparison: A graph comparing your current effort to

the workout target.

Workout Step: During a workout, the current step out of the

total number of steps.

VO2 Max. Standard Ratings

These tables include standardized classifications for VO2 max. estimates by age and gender.

Males Percentile 20–29 30–39 40–49 50–59 60–69 70–79

Superior 95 55.4 54 52.5 48.9 45.7 42.1

Excellent 80 51.1 48.3 46.4 43.4 39.5 36.7

Good 60 45.4 44 42.4 39.2 35.5 32.3

Fair 40 41.7 40.5 38.5 35.6 32.3 29.4

Poor 0–40 <41.7 <40.5 <38.5 <35.6 <32.3 <29.4

Females Percentile 20–29 30–39 40–49 50–59 60–69 70–79

Superior 95 49.6 47.4 45.3 41.1 37.8 36.7

Excellent 80 43.9 42.4 39.7 36.7 33 30.9

Good 60 39.5 37.8 36.3 33 30 28.1

Fair 40 36.1 34.4 33 30.1 27.5 25.9

Poor 0–40 <36.1 <34.4 <33 <30.1 <27.5 <25.9

Data reprinted with permission from The Cooper Institute. For more information, go to www.CooperInstitute.org.

FTP Ratings

These tables include classifications for functional threshold

power (FTP) estimates by gender.

Males Watts per Kilogram (W/kg)

Superior 5.05 and greater

Excellent From 3.93 to 5.04

Good From 2.79 to 3.92

Males Watts per Kilogram (W/kg)

Fair From 2.23 to 2.78

Untrained Less than 2.23

Females Watts per Kilogram (W/kg)

Superior 4.30 and greater

Excellent From 3.33 to 4.29

Good From 2.36 to 3.32

28 Appendix

Females Watts per Kilogram (W/kg)

Fair From 1.90 to 2.35

Untrained Less than 1.90

FTP ratings are based on research by Hunter Allen and Andrew

Coggan, PhD, Training and Racing with a Power Meter

(Boulder, CO: VeloPress, 2010).

Heart Rate Zone Calculations

Zone % of

Maximum

Heart Rate

Perceived Exertion Benefits

1 50–60% Relaxed, easy pace,

rhythmic breathing

Beginning-level

aerobic training,

reduces stress

2 60–70% Comfortable pace,

slightly deeper

breathing, conversation

possible

Basic cardiovascular

training, good

recovery pace

3 70–80% Moderate pace, more

difficult to hold

conversation

Improved aerobic

capacity, optimal

cardiovascular training

4 80–90% Fast pace and a bit

uncomfortable, breathing

forceful

Improved anaerobic

capacity and

threshold, improved

speed

5 90–100% Sprinting pace,

unsustainable for long

period of time, labored

breathing

Anaerobic and

muscular endurance,

increased power

Wheel Size and Circumference

Your speed sensor automatically detects your wheel size. If

necessary, you can manually enter your wheel circumference in

the speed sensor settings.

The tire size is marked on both sides of the tire. This is not a

comprehensive list. You can also measure the circumference of

your wheel or use one of the calculators available on the

internet.

Tire Size Wheel Circumference (mm)

20 × 1.75 1515

20 × 1-3/8 1615

22 × 1-3/8 1770

22 × 1-1/2 1785

24 × 1 1753

24 × 3/4 Tubular 1785

24 × 1-1/8 1795

24 × 1.75 1890

24 × 1-1/4 1905

24 × 2.00 1925

24 × 2.125 1965

26 × 7/8 1920

26 × 1-1.0 1913

26 × 1 1952

26 × 1.25 1953

26 × 1-1/8 1970

26 × 1.40 2005

26 × 1.50 2010

26 × 1.75 2023

26 × 1.95 2050

26 × 2.00 2055

26 × 1-3/8 2068

26 × 2.10 2068

26 × 2.125 2070

Tire Size Wheel Circumference (mm)

26 × 2.35 2083

26 × 1-1/2 2100

26 × 3.00 2170

27 × 1 2145

27 × 1-1/8 2155

27 × 1-1/4 2161

27 × 1-3/8 2169

29 x 2.1 2288

29 x 2.2 2298

29 x 2.3 2326

650 x 20C 1938

650 x 23C 1944

650 × 35A 2090

650 × 38B 2105

650 × 38A 2125

700 × 18C 2070

700 × 19C 2080

700 × 20C 2086

700 × 23C 2096

700 × 25C 2105

700C Tubular 2130

700 × 28C 2136

700 × 30C 2146

700 × 32C 2155

700 × 35C 2168

700 × 38C 2180

700 × 40C 2200

700 × 44C 2235

700 × 45C 2242

700 × 47C 2268

Appendix 29

Index

accessories 15, 17, 26

acclimation 8

addresses, finding 10

alerts 21

altimeter, calibrating 25

altitude 8

ANT+ sensors 1, 15, 17, 18

fitness equipment 6, 7

pairing 6, 17

applications 13, 15, 20

smartphone 1

assistance 14

Auto Lap 21

Auto Pause 22

auto scroll 22

auto sleep 22

back to start 11

backlight 22

bands 26

battery

charging 2

maximizing 25

replacing 24

type 2

Bluetooth sensors 1, 15

Bluetooth technology 13, 15, 22

cadence 17

alerts 21

calendar 6

calibrating, power meter 17

calorie, alerts 21

cleaning the device 24

compass, calibrating 26

computer, connecting 19

Connect IQ 20

contacts, adding 14

courses 11, 12

creating 11

deleting 12

editing 12

loading 12

rerouting 12

customizing the device 20, 21

cycling 8

cycling dynamics 17, 18

data

recording 23

screens 20, 21

sharing 23

storing 19

transferring 19

data averaging 17

data fields 20, 21, 26

data recording 19

deleting, all user data 19, 25

device

care 24

resetting 25

display settings 22

distance, alerts 21

eBike 18

elevation 8, 25

emergency contacts 13, 14

extended display 23

files, transferring 19

fitness 9

Garmin Connect 1, 4–6, 12, 13, 15, 19, 23

Garmin Express 15

updating software 23

GLONASS 22

goals 4, 7

GPS 6, 14, 22

signal 1, 3, 25

GroupTrack 14

heart rate

alerts 21

monitor 7–9, 15, 16, 24

zones 16, 18, 29

history 3, 18, 19

deleting 19

sending to computer 19

icons 1

incident detection 13, 14

indoor training 6, 7

initial setup 25

inReach remote 18

installing 2, 3, 16

intervals, workouts 6

keys 1

language 23, 25

laps 1

LiveTrack 14

locations 10

deleting 11

editing 11

finding with the map 10

sending 14

locking, screen 1

maps 10, 12

finding locations 10

orientation 13

settings 13

updating 23

mounting the device 2, 3

navigation 10

back to start 11

stopping 11

O-rings. See bands

on-screen buttons 1

pairing 1

ANT+ sensors 6, 17

Bluetooth sensors 17

smartphone 1, 25

pedals 17

performance condition 7, 10

personal records 10

deleting 10

platform center offset 18

points of interest (POI), finding 10

power 17

zones 18

power (force) 7

alerts 21

meters 7–10, 17, 18, 28

zones 17

power phase 18

profiles 20

activity 20

user 20

racing 4

recovery 7, 9, 10

replacing the battery 24

resetting the device 25

routes 13

creating 11

settings 13

satellite signals 1, 3, 25

saving activities 3

screen 22

locking 1

segments 4, 5

deleting 5

settings 15, 18, 20, 22, 23

device 22, 23, 25

sharing data 23

sleep mode 22

smart recording 19

smartphone 1, 13, 20, 22

applications 15

apps 15

pairing 1, 25

software

license 23, 24

updating 18, 23

version 23, 24

specifications 23

speed and cadence sensors 16, 17, 24

start notice message 22

storing data 19

stress score 10

system settings 22

target 7

temperature 8, 26

time, alerts 21

time zones 23

timer 3, 18

tones 23

touchscreen 1

training 4, 6–8

pages 3

plans 6

screens 20, 21

Training Effect 9, 10

training load 7, 8

training status 7, 10

transferring, files 15

troubleshooting 16, 25, 26

unit ID 23, 24

units of measure 23

updates, software 18, 23

USB 23

disconnecting 19

user data, deleting 19

user profile 20

Virtual Partner 7

VO2 max. 7, 8, 10, 28

waypoints, projecting 11

wheel sizes 29

Wi-Fi 1

Wi‑Fi 13, 15, 23

connecting 15

widgets 20

workouts 5, 6

creating 5

deleting 6

editing 5

loading 5

30 Index

zones

power 17

time 23

Index 31

support.garmin.com

GUID-D9E9CF32-5A89-4140-8B6A-0A61633E397F v1June 2020

Is er een mogelijkheid om het geluidsignaal van de 1030 te versterken Gesteld op 13-7-2023 om 08:23
Reageer op deze vraag Misbruik melden
hoe kan ik een route opnemen met 1030 .met welke knoppen moet ik doen? Gesteld op 5-6-2023 om 20:26
Reageer op deze vraag Misbruik melden
Kan ik mijn Garmin Edge 1050 Plus instellen om te stappen ?ik zou in de bergen gaan stappen
Zo ja hoe kan ik dit doen?
Bedankt
Gesteld op 14-9-2022 om 16:56
Reageer op deze vraag Misbruik melden
garmin edge 1030 plus "tekstgrootte" wijzigen bij de gegevens op de kaart. Hoe kan de tekst op de kaart groter of kleiner gemaakt worden. Gesteld op 10-9-2022 om 11:59
Reageer op deze vraag Misbruik melden
Hoe kan ik een zelf gemaakte route omdraaien op mijn Carmin edge 1030 Gesteld op 16-5-2022 om 11:29
Reageer op deze vraag Misbruik melden
Hoe kan ik de datum instellen?
Edge 1030 plus

Gesteld op 12-5-2021 om 22:26
Reageer op deze vraag Misbruik melden

Hallo, mijn telefoon is verbonden met de edge 1030 plus met connect. Komoot is ook verbonden met connect. Hoe krijg ik komoot op de edge ? Gesteld op 27-2-2021 om 12:00
Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin Edge 1030 Plus bij:

nieuwe vragen en antwoorden
nieuwe handleidingen

U ontvangt een email met instructies om u voor één of beide opties in te schrijven.

Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin Edge 1030 Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 4,34 mb groot.

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Garmin Edge 1030 Plus

Garmin Edge 1030 Plus Gebruiksaanwijzing - Nederlands - 40 pagina's

Garmin Edge 1030 Plus Gebruiksaanwijzing - Deutsch - 40 pagina's

Garmin Edge 1030 Plus Gebruiksaanwijzing - Français - 40 pagina's

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.

Garmin Edge 1030 Plus Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Garmin Edge 1030 Plus

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info

Garmin Edge 1030 Plus Handleiding

Hulp nodig? Stel uw vraag in het forum

Forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Garmin Edge 1030 Plus

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info