General safety warnings
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
Save these instructions
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b. Do not operate Pumps in explosive atmospheres, such as in the
presence of ammable liquids, gases or dust. Pumps create sparks
which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a Pump.
Distractions can cause you to lose control.
2. Electrical safety
a. Pump plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) Pumps.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
c. Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the Pump. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of
electric shock.
d. When operating a Pump, use an extension cord suitable for wet
conditions. Use of a cord suitable for wet use reduces the risk of
electric shock.
e. This Pump must be used with a residual current device with rated
residual current of 30mA or less. Use of an RCD reduces the risk of
electric shock.
4
