724644
17
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
47.1cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 61705 • 08/2018 • FCS4800A
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
47.1cc Petrol Chainsaw
MODEL: №. 61705 • 08/2018 • FCS4800A
30 31
WARNING: The chain has sharp edges.
Use work gloves for safety.
Vents:
1 . Clean any dust away from the cooling vents as
clogged vents can cause overheating.
Servicing
It is recommended once you rst use your product to get it serviced after
15 hours of use.
From thereafter, service the product every 2 years, or every 50 hours of
use if frequently used.
A 3mm hex key (36) is supplied for the purpose of future maintenance /
servicing.
Always t the chain and bar cover (31) when the chainsaw is not in use.
It is recommended to drain BOTH fuel and oil from the chainsaw on the
completion of use, prior to storage or transportation.
Always sit the chainsaw on a surface where the leakage of oil will not be
a problem. The chainsaw is tted with an oil pump and there will be after
use an amount of oil in the oil channels inside the chainsaw, and also in the
chain and bar channel. This oil can spill on to the surface the chainsaw is
sitting as it drains from the above points.
Always store the chainsaw in an area safe away from the elements of the
environments, i.e. high humidity, wet locations, hot environments etc.
Storage area should also be out of reach of children of both the chainsaw
and all accessories.
Store the chainsaw ensuring the bar cover securely covers the chain (20)
and guide bar (19). The chainsaw should always be stored with the On/O
switch (4) in the ‘O position and the chain brake (13) ON.
If the chainsaw is to be stored for a long period of time it is advisable to
apply a thin spray of oil over the chain (20), guide bar (19) and all exposed
metal parts.
The chainsaw should be thoroughly cleaned of all wood chips, dirt etc prior
to storage. A chainsaw carry bag (38) is supplied with this chainsaw.
Place the chainsaw with the bar cover (31) installed, into the chainsaw bag,
and secure the zip. Carry it safely using either the shoulder strap or by
securing the velcro carry handle.
AU.
Air Filter:
1. Remove the air lter cover (15) by rotating the
air lter knob (16) in an anti-clockwise direction,
and removing the air lter cover (15) (Fig AM).
2. Disconnect the black pipe from the cylinder
cover (Fig AQ), and then also from the air lter
itself.
3. Grasp the sides of the air lter (14) and pull it
outwards (Fig AR).
4. Dry particles can be removed by tapping on a
hard surface. More stubborn dirt may require
washing the air lter (14) with warm soapy
water and a soft brush.
5. After thoroughly drying the air lter (14),
re-install the black pipe onto the air lter from
where it was removed, and re-insert the air
lter back in place. Re-attach the black pipe
back onto the cylinder cover, and ensure all is
secure in place. Replace the air lter cover (15),
and secure the air lter knob (16) in a clock wise
direction to secure the air lter cover (15) back
in place.
Guide Bar:
1. Take o the guide bar (19) and maintain it by
removing any sawdust from the groove in the
guide bar (Fig AS).
2. Make sure that the oil port is not clogged. Oil
the nose sprocket at the tip of the guide bar (19)
(Fig AT).
3. Check for fuel and oil leakage and loose
fastenings, especially those securing the
handles and the guide bar (19).
If any defects are found, take the tool to an
authorised Service Agent.
4. A bar cover (31) is supplied with this chainsaw
and should be tted over the chain (20) and
guide bar (19) whenever the chainsaw is not
being used. This includes immediately after use,
transportation and service where possible.
The chain teeth are extremely sharp and could
create a safety hazard if the bar cover (31) is not
tted. Furthermore, the bar cover (31) provides
protection to the chain cutting edge when the
saw is not in use (Fig AU).
AS.
AR.
AQ.
AT.
Maintenance Maintenance
Transportation and Storage
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gardenline FCS4800A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gardenline FCS4800A in de taal/talen: Engels als bijlage per email.

De handleiding is 1,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info