724644
14
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
47.1cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 61705 • 08/2018 • FCS4800A
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
47.1cc Petrol Chainsaw
MODEL: №. 61705 • 08/2018 • FCS4800A
24 25
Chainsaw Applications
WARNING: Do not use the chainsaw if you are tired or under the
inuence of drugs, alcohol or medication.
If you are unfamiliar with the following cutting procedures, ensure you
fully read and understand the instructions before undertaking the task.
Bucking Spike (Fig AH)
This chainsaw is tted with a spiked bumper (18). When downward cutting,
the bumper should be spiked into the surface of the timber being cut.
This point is then used as a pivot point ensuring the cutting action is in the 1st
quadrant of the bar length.
The cutting action is then performed by lifting the rear handle (1) of the
chainsaw while the bucking spike (18) is the pivot in the timber.
The cutting action at the bar is then downward and the cut is made.
The bucking spike (18) is reset to a new
pivot point by reducing the speed of the chainsaw to idle, withdrawing the
chainsaw slightly away from the timber being cut and lowering the rear
handle (1) so the bucking spike (18) is in a
lower position on the timber.
Apply the bucking spike (18) to the timber in
the new lower position and continue the cut
in the above action.
NOTE: A 4mm hex key (35) has been supplied
to remove the bucking spike if required.
Simply insert the end of the 4mm hex key into
the hex key screw head on the bucking spike
and rotate in an anticlockwise direction to
loosen and remove.
Felling a Tree (Fig AI)
WARNING. Felling a tree should only
be done by trained operators.
Decide the direction in which you wish
the tree to fall taking into
account the direction of the wind, the
position of branches, lean of the tree, ease
of subsequent limbing and bucking and
other factors prevalent at the time.
While cutting, always:
Run the chainsaw motor at full revs. This makes the job safer, as there is
less chance of pull-in or kick-back.
Position your body to the left of the chainsaw so if it kicks back
uncontrollably, it goes over your right shoulder. Never stand in the
cutting line of the chainsaw.
Keep a rm grip with your left hand on the front handle, with your thumb
securely below the handle.
The swivel of your wrist in a kick-back situation will activate the
chain brake.
Make sure the chain is tensioned correctly.
Guard against Kickback
Check the operation of the front guard / chain brake (13) each time you
use the chainsaw. Run the chainsaw at full throttle for 1-2 seconds then
push the front guard / chain brake (13) forwards. The chain (20) should stop
immediately. If the chain (20) is slow to stop or only slows down you must
take the chainsaw to an authorised Service Agent. Disengage the front
guard / chain brake (13) by pulling the front guard backwards until you hear
a click (Fig A).
Do not use the chainsaw if the front guard / chain brake (13) is not operating
correctly.
Be constantly aware of the position of the upper quadrant of the blade
tip. This is the part that triggers a kickback when it hits resistance.
Never engage the upper quadrant of the guide bar (19) with whatever
you are cutting and avoid contact with any hidden branches or
obstructions. Ensure there is a clear work area.
Always clear away brush, vegetation and any obstructing debris before
attempting a cut that might trigger a kickback.
Avoid cuts that will cause the chainsaw to jam in a tree trunk or limb.
Observe the size of wood shavings, if they become dusty your chain (20)
could need sharpening.
Operation Operation
1
2
1
2
1
2
1
2
AI.
AH.
PIVOT POINT
LIFT
HANDLE
UP WARDS
SECURE SPIKE WITH
LEADING HAND
BLADE ROTATION
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gardenline FCS4800A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gardenline FCS4800A in de taal/talen: Engels als bijlage per email.

De handleiding is 1,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info