724644
8
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
47.1cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 61705 • 08/2018 • FCS4800A
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
47.1cc Petrol Chainsaw
MODEL: №. 61705 • 08/2018 • FCS4800A
12 13
This chainsaw comes fully assembled in the box and does not require any
pre-assembly.
Replacing/Re-Installing the Guide Bar & Chain
WARNING: The chain has sharp edges.
Use work gloves for safety.
WARNING: Ensure the engine is switched o when making any
adjustments to the chain and bar.
IMPORTANT: The front guard / chain brake (13) must be disengaged
when replacing / reinstalling the guide bar (19) and/or chain (20).
1. Place the chainsaw on a at and secure
surface and check that the chain brake (13) is
disengaged (Fig A).
2. Remove the chain drive side cover (23) by using
the combination tool (bar nut tube spanner)
(32) in an anti-clockwise direction to loosen
the chain drive side cover nuts (24). (Fig B), and
then remove the chain drive side cover (23).
Ensure the chain brake (13) is NOT engaged.
3. With the chainsaw on its side and the bar uppermost, (Fig C), push the
guide bar (19) towards the drive sprocket (29) (Fig D), which will result in
the chain (20) loosening around the guide bar (19).
4. Remove the chain (20) from the guide bar (19) starting at the nose of the
guide bar rst. Once the chain (20) is removed from the guide bar (19),
the slack chain can be removed o the main drive sprocket and lifted over
the brake and clutch assembly (22). The guide bar (19) is then removed
by sliding it away from the chainsaw housing and then lifting the bar over
the two threaded studs. When the bar is removed from the chainsaw it
should be thoroughly cleaned of sawdust and oil prior to reassembly.
5. Insert the guide bar (19) into position over the 2 threaded studs, and on
a slight angle upwards, and push the guide bar (19) under the clutch and
brake assembly (22) fully towards the drive sprocket (29) to easily place
the chain (20) around the guide bar (19) (Fig E).
6. Place the new chain over and then under the chain brake and clutch
assembly (22), and then around the drive sprocket (29) loosely with the
chain links in the direction shown on the guide bar (19) (Fig F).
Important Information Assembly
A.
BRAKE
OFF
Assembly
IMPORTANT INFORMATION
B. D.C.
LOOSEN
FLAT
NOTE: SIDE VIEW
E.
F .
This chainsaw uses a 4 stroke engine and does not require the
mixing of oil with the fuel.
The chainsaw is tted with ONE oil tank which supplies oil to
BOTH the engine and also the chain and bar.
4 Stroke Engine oil is required to be added to the combination oil
tank (6) on this chainsaw.
ALWAYS ll the combination oil tank (6) with 4 stroke oil every
time fuel is added to the fuel tank (8).
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gardenline FCS4800A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gardenline FCS4800A in de taal/talen: Engels als bijlage per email.

De handleiding is 1,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info