687465
29
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
3.16.2.4 Exit angles > Sectors
The robotic lawnmower can be set for 1 or 2 exit
sectors. If the charging station is placed in a passage, 2
exit angles, for instance 70° - 110° and 250° - 290°, can
be used.
When 2 exit angles are used, there is a need to also
specify how often the robotic lawnmower must leave the
charging station in
Sector 1
. This is done using the
Proportion
function by initially specifying a percentage.
For instance the percentage of 75 % means that the
robotic lawnmower leaves the charging station in
Sector
1
on 75% of the times and 25% of the times in
Sector 2
.
Use the number keys to specify the required angles in
degrees for the sectors and proportion as a percentage.
3.16.2.5 Reversing distance
This functions allows you to control how far the robotic
lawnmower has to reverse out from the charging station
before it starts mowing. This is a useful function for
instance if the charging station is placed way in under a
veranda or in another limited space area.
Use the number keys to specify the required reverse
distance in centimetres. The factory setting is 60 cm.
3.16.2.6 Drive past wire
The front of the robotic lawnmower always passes the
boundary wire by a specific distance before the mower
turns around. The default distance is 32 cm, but this can
be changed if required. A figure between 25 and 40 can
be selected.
Note that the distance given is only an approximate
value and should be regarded as a guide. In reality, the
actual distance the robotic mower passes the boundary
wire can vary.
Specify the number of centimetres you want the robotic
lawnmower to pass the boundary wire and press OK.
3.17 Settings
This selection allows you to carry out changes to the
robotic lawnmower’s general settings.
SETTINGS
General
ECO mode
3.17.1 ECO mode
This function automatically turns off the signal in the
boundary loop, the guide wires and the charging station
when the robotic lawnmower is not mowing, i.e. when
the lawnmower is charging or is not allowed to mow due
to timer settings.
ECO mode
Use ECO mode
ECO mode
is suitable to use where there is other
wireless equipment not compatible with the robotic
lawnmower e.g. certain hearing loops or garage doors.
When
ECO mode
is activated, the indicator lamp in the
charging station flashes green.
ECO mode
means that
the robotic lawnmower can only be started in the
charging station and not out in the working area.
In
ECO mode
, it is very important to always press the
STOP button before removing the robotic lawnmower
from the charging station. It is otherwise not possible to
start the robotic lawnmower. If the lawnmower has been
removed by mistake without first pressing theSTOP
button, the lawnmower must be placed back in the
charging station and the STOP button pressed. Only
then can the robotic lawnmower be started inside the
working area.
Select
ECO mode
and press OK to activate
ECO mode
.
Note: Always press the STOP button before removing
the robotic lawnmower from the charging station. In
ECO mode
the robotic lawnmower otherwise can not be
started inside the working area.
3.17.2 General
Set language and time or reset user settings to factory
default.
General Time & date
Language
Country
Reset all user settings
About
3.17.2.1 Time & Date
This function allows you to set current time and date and
required formats.
307 - 002 - 11.10.2017 Installation - 29
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gardena SILENO plus R160 Li-LiC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gardena SILENO plus R160 Li-LiC in de taal/talen: Engels als bijlage per email.

De handleiding is 7,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Gardena SILENO plus R160 Li-LiC

Gardena SILENO plus R160 Li-LiC Gebruiksaanwijzing - Nederlands - 56 pagina's

Gardena SILENO plus R160 Li-LiC Gebruiksaanwijzing - Deutsch - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info