687465
28
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
3.16.1.7 How to measure the distance to a remote area
1. Park the robotic lawnmower in the charging station.
2. In the
Area 1, 2 or 3
>
How far?
menu function, enter
a distance which beyond any doubt exceeds the real
figure. The maximum distance that can be entered is
500 metres.
3. Select
Area 1, 2 or 3
>
More
>
Test
and press OK.
4. Press START and close the hatch.
5. Press STOP at the required position. The distance is
now shown in the display. This figure can now be
saved in
Area 1, 2 or 3
>
How far?
.
3.16.1.8 Area 1, 2 or 3 > More > Reset
An individual area setting can be reset to the factory
setting using this function. To reset an area setting,
select
Area 1, 2 or 3
>
More
>
Reset
using the left right
arrow keys followed by OK.
3.16.2 Advanced
Under the
Advanced
heading, there are more settings
relating to the behaviour of the robotic lawnmower. The
settings in this menu are only required if additional
control of the lawnmower is needed e.g. in complex
gardens. The factory settings are selected in a way that
should suit most working areas.
Advanced
Corridor width
Exit angles
Reversing distance
Drive past wire
3.16.2.1 Corridor width
The corridor width is a measure of how far from the
guide wire/boundary wire the robotic lawnmower is
allowed to travel when it follows this to and from the
charging station. The area beside the wire which the
robotic lawnmower then uses is called the Corridor.
The aim of operating at varying distances from the wire
is to reduce the risk of tracks forming. Therefore it is
recommended to select the widest corridor possible
allowed by the size of the working area.
The robotic lawnmower adjusts the corridor width
according to the size of the working area when following
along a guide wire. The inbuilt automatic mechanism
allows the robotic lawnmower to vary the distance from
the wire depending on where in the working area it is
located. It automatically makes the corridor narrower in
narrow passages for instance.
The factory settings can be used for many working
areas, i.e. the robotic lawnmower itself can use the
inbuilt functions to operate in the widest possible
corridor. In more complex gardens e.g. where the guide
wire is placed close to obstacles which cannot be
isolated using the boundary loop, operational safety can
be improved by carrying out some of the manual
settings outlined below.
3.16.2.2 Corridor width > Guide
The guide corridor width is adjusted automatically. Only
in rare occasions manual settings need to be entered.
The guide corridor width can be set between
0
and
9
.
If value
0
is specified, the robotic lawnmower will
straddle the guide wire meaning it runs right over the
middle of the guide wire.
Use the arrow keys to specify the required value.
The factory setting is
9
.
3.16.2.3 Exit angles
Normally the robotic lawnmower leaves the charging
station in a direction within the 90°-270° exit sector. By
changing the exit angles, it makes it easier for the
robotic lawnmower to reach the largest working area if
the charging station is placed in a passage.
28 - Installation 307 - 002 - 11.10.2017
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gardena SILENO plus R160 Li-LiC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gardena SILENO plus R160 Li-LiC in de taal/talen: Engels als bijlage per email.

De handleiding is 7,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Gardena SILENO plus R160 Li-LiC

Gardena SILENO plus R160 Li-LiC Gebruiksaanwijzing - Nederlands - 56 pagina's

Gardena SILENO plus R160 Li-LiC Gebruiksaanwijzing - Deutsch - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info