17
GB
Starting the cylinder mower:
Charging level displays on
the lawnmower:
J
K
0
B
RISK OF INJURY !
6. Operation
Risk of injury if the cylinder mower does not switch off
automatically!
V Do not
remove or bypass safety devices on the cylinder
mower (e.g. by tying the starting handle to the upper part
of the upright)!
DANGER ! Blade cylinder continues to turn after
A
switching off!
V Never lift, tilt or carry the cylinder mower with
the motor running!
V Never start the mower on a paved surface (e. g. asphalt).
V Always maintain the safety distance between the
blade cylinder and the user set by the guide handle.
Switch cylinder lawnmower on:
The cylinder lawnmower is prevented against being switched
on unintentionally by means of the safety key.
1. Place the cylinder lawnmower on a level lawn surface.
2. Insert safety key
J
.
3. Press and hold safety lock
B
and then pull the start bar
K
on the upper handle
0
The cylinder lawnmower starts and the charging level display
is lit for 20 seconds.
4. Release safety lock
B
.
Switch cylinder lawnmower off:
1. Release start bar
K
on upper handle
0
.
2. Remove safety key
J
every time work is
interrupted.
Note: The cylinder lawnmower can be operated by Accu or as a
manual lawnmower without battery power.
green LED is lit Accu fully charged
yellow LED is lit Accu half charged
red LED is lit Accu is almost empty
red LED flashes Accu empty
When the Accu is almost empty (red LED is lit), it should be
char-ged. If the Accu is empty (red LED flashes), the cylinder
lawnmower can no longer be started and the Accu must be
charged.
