14
EN
Storage /
storage during winter:
6. Putting into Storage
ATTENTION !
A Water Distributor may be damaged as the
product is not frost-resistant!
V Protect the Water Distributor against frost.
1. Loosen connections.
2. If required, unlock Water Distributor and remove from the
mounting plate.
3. Store Water Distributor in a dry, frost-protected place.
The storage location must be out of reach for children.
7. Maintenance
Regularly check the filter.
1. Unscrew Tap Connector 3.
2. Remove filter 5 and clean.
3. Screw Tap Connector 3
with filter 5 back on to
the connection on the
inlet side 6.
4. Press catch B on viewing
window 0 upwards,
remove viewing window
and clean it.
5. Refit viewing window 0.
A dirty Water Distributor can affect the switch mechanism.
We recommend rinsing the Water Distributor once a year.
1. Set all flow levers on On and remove the end caps.
2. Open the water tap or set Water Computer to manual irrigation.
3. After 30 sec., press dial disc so that next outlet will be rinsed
out.
4. Repeat Number 3 for all outlets.
8. Troubleshooting
ATTENTION !
If the programmes are not correctly matched to the outlets
then significant damage can result through over-watering
or drying-out as the programmes will then be carried out
through the incorrect outlets!
V Make sure that the programmes are correctly matched
up to the outlets.
Rinse Water Distributor:
Clean filter and viewing
window:
B
0
3
5
6
