12
EN
Set open outlet on
the Water Distributor:
With Water Computer:
Outlet side:
2 to 6 outlets may be used. Outlets 1 and 2 must always be
used. The outlets 3 to 6 can be switched on using the flow
levers 8. 5 Tap Connectors 3 and 3 end caps 7 are included.
Outlets not being used must be closed with an end cap 7.
Setting flow lever On / Off:
1. Open protection cover 9.
2. Set flow levers 8 for used outlets
(e.g. 3 and 4) on On.
3. Set flow levers 8 for not-used outlets
(e.g. 5 and 6) on Off.
4. Close protection cover 9 and lock-in.
Connect used / not-used outlets:
1. Screw Tap Connectors 3 onto the used outlets (e.g. 1 to 4).
2. Close not-used outlets (e.g. 5 and 6) with end caps 7.
3. Connect used outlets 1 to 4 with the devices.
Important:
The flow levers (On / Off) must match up with the outlets
(used / not-used).
The programme numbers of the Water Computer must match
up with the outlets in use.
5. Operation
Behind the viewing window 0, the currently open outlet is
shown. If irrigation is to be done (manually) through a different
outlet, or if the open outlet does not match up with the pro-
gramme of the Water Computer, the desired open outlet can be
selected with the dial disc A.
v Press dial disc A until the desired open outlet (e.g. 3) is
shown in the viewing window 0.
When using a GARDENA Water Computer Art. 1892, “Menu:
Water Distributor automatic“ should be used. Here, the
5 min. pause between programmes required for secure further
switching is automatically considered.
1. Set the programmes (irrigation times) for the outlets in use.
2. Press dial disc A until the open outlet in the viewing window 0
matches the desired programme of the Water Computer.
8
7
8
9
0
A
3
