An example of 3-stage programming
This example will lead you step by step through
storing a program with the following program
stages under the storage number P3:
1. 20 minute microwave operation at 100 W
2. 6 minute combination mode grill and micro-wave
at 425 W and 210 °C grill temperature
3. 8 minute grill operation at 170 °C
Setting procedure
• Press the confirmation key and keep it pressed
until a signal is sounded.
P1 is shown on the
display. Press the + key, until
P3 is shown on the
display.
• Repress the confirmation key and keep it pressed
until a signal is sounded.
P31 is shown on the
display, i.e. the third storage number, the first
program stage.
• Now you can select the desired cooking time:
press the + key, until
20:00 is shown on the
display. Press the microwave key.
----
is shown
on the display.
• Now you can select the desired microwave power
setting: press the + key, until
100 is shown on the
display. Press the microwave key.
• In this program stage you want to use microwave
operation only, therefore press the microwave key
again.
P32 is shown on the display, i.e. the third
storage number, the second program stage.
• Now you can select the desired cooking time:
press the + key, until
06:00 is shown on the
display. Press the microwave key.
----
is shown
on the display.
• Now you can select the desired microwave power
setting: press the + key, until
425 is shown on the
display. Press the microwave key.
• Now you can select the desired grill temperature:
in this program stage you want to use combination
mode, therefore press the + key, until
210 is
shown on the display.
• Press the microwave key, in order to access the
third program stage.
P33 is shown on the display,
i.e. the third storage number, the third program
stage.
• Now you can select the desired cooking time:
press the + key, until
08:00 is shown on the
display. Press the microwave key.
----
is shown
on the display.
• In this program stage you want to use grill
operation only, therefore press the microwave key
again.
• Now you can select the desired grill temperature:
press the + key, until
170 is shown on the display.
• Finally press the confirmation key and keep it
pressed until a signal is sounded, to store all
stages for this storage number. Press the cancel
key, in order to exit the programming mode.
Please note: the programming mode will
automatically end without storing any values, should
you interrupt programming it for a longer period of
time. By pressing the grill key you can go one step
back in the programming, for example to change or
to check a value.
Selecting the stored program
• Press the confirmation key and keep it pressed
until a signal is sounded.
P1 is shown on the
display. Press the – key, until
P3 is shown on the
display.
• Repress the confirmation key. The programm
starts automatically. The total cooking time of the
program is shown on the display.
14
