781774
45
Verklein
Vergroot
Pagina terug
1/99
Pagina verder
Original manual for petrol chainsaw FX-KSP series
45
W1
Sharpening
angle
Depending on saw
chain 25° - 35°
W2
Side plate angle
60°
W3
Cutting angle
85°
4
Saw tooth length
minimum 4 mm
5
Refiling angle
25° - 3
6
Cutting angle
85°
7
Side plate angle
60°
NOTE!
If sharpening with a suitable file gauge and as-
sociated files, the aforementioned angles can
be disregarded. These are preset in this case
by the location and dimensions of the gauge.
CAUTION!
Risk of injury! Instructions for refiling:
Switch off the engine and allow it to cool
down
Activate the chain brake
Firmly clamp the saw chain in the guide
rail
Wear safety gloves with cut protection
Use files and gauges suitable for the
saw chain these vary depending on
the model!
Model FX-KS155/162: 0.325 / 058-72
Sharpening the saw teeth
Prerequisite: All of the tools and equipment
required for the type of chain (file gauge for
saw teeth, depth gauge, round and flat files)
are ready for use.
NOTE
File gauge for saw teeth, depth gauge and
flat files are not provided. Round files are in-
cluded!
Clamp the guide rail and the chainsaw
firmly in the vice of a workbench.
Place the file gauge on the saw chain
Arrows on the file gauge point in the
chain direction of rotation.
Ensure that the file gauge is fully in
contact with the saw chain.
Place the correct sized round file on the
guides of the file gauge.
Using the round file at the
prescribed file angle (2 - 3 depending
on the type of chain) and holding it with
two hands, sharpen every second saw
tooth with even file movements away
from the body.
Remove the guide rail from the vice and
clamp it in the opposite direction.
Now sharp all remaining saw teeth.
Depth stop
1
Depth gauge file direction (flat file)
2
Round off tooth shoulder
3
Depth gauge standard dimension
0.65 mm
After sharpening the saw teeth, place the
depth gauge on the saw chain.
File the saw teeth to the prescribed depth.
Round off the front edges of the tooth
shoulders to:
minimise the risk of kickback
minimise the risk of the retaining straps
tearing.
Guide rail wear
The guide rail must be checked at regular in-
tervals for wear of the guide groove.
45

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fuxtec FX-KSP250 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fuxtec FX-KSP250 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 2.58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info