781774
44
Verklein
Vergroot
Pagina terug
1/99
Pagina verder
Original manual for petrol chainsaw FX-KSP series
Place the chainsaw down in a way that it
cannot tip over. No fuel should escape!
Unscrew the fuel tank cap (1.) and re-
move (2.).
With a piece of wire bent at the end, pull
out the filter insert (3.).
Wash the filter insert with petrol or renew if
necessary.
Perform a visual check of the cap seal and
also renew if necessary.
Insert the filter insert and screw on the cap
firmly.
Removing the spark plug
Pull off the spark plug connector.
Unscrew the spark plug in anti-clockwise
direction with a spark plug wrench (C)
(socket).
Clean the electrodes with a wire brush.
Check the electrode gap with a gauge. Ad-
just to 0.6 0.7 mm if necessary.
Screw the spark plug with seal firmly into
the engine housing.
Mounting the spark plug
The components are assembled in the re-
verse order of removal (see diagrams above).
NOTE!
A spark plug wrench of the correct size is in-
cluded.
Cleaning cylinder cooling fins
WARNING!
Heavily contaminated cooling fins will cause
the engine to overheat and result in engine
damage!
Lever off the 2 quick-fit clips on the filter
cover using a screwdriver.
Remove the filter cover and filter.
Pull off the spark plug connector.
Unscrew 5 securing bolts:
2 countersunk securing bolts next to
the quick-fit clips
2 securing bolts that are accessible af-
ter removing the filter cover; the air filter
must be removed
1 countersunk securing bolt on the side
in the area of the chain brake lever.
Lift off the cylinder housing.
Clean the cylinder cooling fins by suitable
means, e.g. a wire brush.
Mount the cylinder housing again.
NOTE!
Ensure, when installing the cylinder housing,
that all switch wires and attachments are lo-
cated back in their original position.
Saw chain
NOTE!
Acquire the necessary information about ac-
cessories (gauges, associated files etc.) and
instructions about resharpening your saw
chain from the manufacturer or a specialist
dealer.
For reliable and trouble-free operation, the
teeth of the saw chain must always be sharp.
The teeth must be resharpened (with a file) if:
the saw chippings begin to take on a pow-
dery form
additional effort is required to make a cut
a straight cut is no longer possible
heavy vibrations are experienced
the fuel consumption increases.
Adhere to the following angles when resharp-
ening manually:
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fuxtec FX-KSP250 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fuxtec FX-KSP250 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 2.58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info