Order Numbers
F4090 - F4091 - F4092
F4095 - F4096 - F4097
53
Short 3-position switched
channel
No. F 1500
Expands the FX transmitter by
one 3-position switched channel.
Also expands Multi-modules by
one proportional channel.
Long 2-position switched
channel
No.F 1524
Expands the FX transmitter by
one 2-position switched channel.
Also expands Multi-modules by
one proportional channel
Long 2-position mixer push-
button
No.F 1504
For operating mixer functions.
2-position stick switch
No.8343
For operating mixer, channel or Multi
functions.
3-position stick switch
No.8344
For operating mixer, channel or Multi
functions.
Push-button stick switch
No.8346
For operating momentary functions such
as stopwatch etc.
Short 2-position mixer push-
button
No.F 1502
For operating mixer functions.
Long 2-position mixer switch
No.F 1521
For operating mixer functions.
Stick top extension
No.8086
Extends the sticks for use in a
transmitter tray or with the
neckstrap system. Variable
length;10.5 mm Ø,length 47 mm.
Contents:2 units
Long 3-position mixer switch
No.F 1522
For operating mixer functions.
Mini battery controller
No.8248
For 4.8 Volt receiver batteries.10-
stage chain of LEDs provides
information about the current
voltage level of the receiver
battery while the model is in use.
Short 3-position mixer switch
No.F 1503
For operating mixer functions.
Short 2-position latching mixer
switch
No.F 1523
For operating mixer functions.
10-LED switch harness,4 NC
No.F 1404
Switch harness with integral
battery controller and
DSC/charge socket in a compact
housing. The integral battery
monitor shows the voltage of the
receiver battery in 1/10 Volt
increments.
CAMPac model memory
modules
4 K No.F 1508 3 models
16 K No.F 1509 12 models
64 K No.F 1566 49 models
Double mix trimmer module
No.F 1506
Two mix trimmers for adjusting
mixer values in flight. Supplied
with aluminium knobs.
