29053
65
Verklein
Vergroot
Pagina terug
1/78
Pagina verder
Sailplane Section
Mode Setting
Offset Rate Setting
Aileron
Servo
Travel
Mode Selection Keys
To On/Off Switch
Setting Menu
Flap
Servo
Travel
To Previous Screen
Return To
Condition Menu
To Next Screen
Offset Position Setting
This sets the position where butterfly begins working.
Press the B key, then set the butterfly control (throttle
stick or left side knob) to the position to be set and press
the F ( SET ) key. We recommend one or two clicks
down from the high throttle position.
Aileron Servo Down Side Travel Setting
Press the C key and set the rate with the numeric
keys E to M . The setting range may vary from —100 to
+100% and the initial value is +50%. If you set the BFY
to be activated with the throttle stick moving down from
the top (full throttle) position, this setting has no effect
because motion is all on the Up side.
Aileron Servo Up Side Travel Setting
Press
the D
key
and
set
the rate
with
the
numeric
keys E to M . The setting range may vary from —100 to
+100% and the initial value is +50%. If you set the BFY
with the throttle stick, this setting is the important one.
Flaps Servo Down Side Travel Setting
Press the
NXT Q
key to get to the flap setting
menu. Then press the C key and set the rate with the
numeric keys E to M. The setting range may vary from
-100 to +100% and the initial value is +50%. If you set
up with throttle stick, this setting has no effect.
Flaps Servo Up Side Travel Setting
Press the
D
key and set the rate with the numeric
keys
E to M.
The setting range may vary from —100 to
+100% and the initial value is +50%. This is the effective
setting to make if throttle stick is used as mentioned
before.
ON/OFF Switch Setting
An ON/OFF switch is not defined initially. To define
one, display the switch setting screen by pressing the
SWT P
key. Use the keys to choose the switch and ON
direction you want. For a description of the switch setting
method, see page 40.
If you want BFY on all the time but don't like the
alarm, press the
SWT P
key, then press the
STK O
key, to get to the stick setting menu. Choose the throttle
stick
J3
and set it just above the offset position. Press the
SET Q
button to input the On position, then move
the throttle stick to be sure. You may need to switch
direction with the
+/- P
key.
Sailplane Section, Page 141
65

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Futaba 9ZHP_part2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Futaba 9ZHP_part2 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info