29053
64
Verklein
Vergroot
Pagina terug
1/78
Pagina verder
Sailplane Section
BUTTERFLY MIXING (BFY)—4-S/5-S
Butterfly mixing, sometimes canned "crow"
mixing, is a way to get effective glide path control
without
using
spoilers.
The
butterfly
action
simul-
taneously raises the left and right ailerons and
lowers the speed flaps (brake flaps for 5-S).
The total travel can be adjusted by CH6 vol-
ume. The butterfly neutral position can be offset
from the center position. Butterfly mixing can be
turned on and off during flight by setting a switch.
If a switch is not set, mixing remains on all the
time.
5-S BUTTERFLY OPERATION
4-S BUTTERFLY OPERATION
Setting Up Butterfly Mixing
Butterfly is often controlled with the throttle stick,
but at initiation the control is assigned to the left knob
VR(A). The FNC command in the Model menu may be
used to change the assignment. In that menu, select SF2
with the J key, then press CTR. Select the throttle stick
by choosing J3 with the K key (null the CTR for airbrake
ABK
if you want). At this time, be sure that both
ailerons and speed flaps (or brake flaps for 5-S) move the
proper directions. The default speed flap control is the
left slider. If you use speed flap-aileron mixing, this will
become the camber control.
Activation of command
In the Condition Menu, press the
BFY
key to get the
BUTTERFLY menu, as shown in the figure.
Mode Setting
Press the
A
key to activate mixing, then press the
ACT
or
INH
key ( F or G ) to activate or inhibit the
butterfly function. When you activate, you will notice
two things: first, all four wing servos move, unless the
throttle stick happens to be at center. Second, the Alarm
light begins flashing. The alarm light is on whenever BFY
is active. This is OK, except the transmitter will beep if it
is on when first powered up. This is annoying, because
you can't stop it!
In just a moment, you will set the offset position for
the butterfly stick. The alarm light and beeping at startup
may be taken care of two ways: either an activation
switch may be defined, or the on position may be set
slightly away from the zero-butterfly position. In the
latter case, the function is off until the stick is moved
slightly.
Sailplane Section, Page 140
64

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Futaba 9ZHP_part2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Futaba 9ZHP_part2 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info