84
Warning Displays eThe table below lists the warnings that are displayed on the LCD monitor
Warning Displayed Explanation Remedy
The camera batteries are low
on charge.
No media is inserted.
i The media is not formatted
(initialized).
i The SmartMedia contact area
(gold-colored area) is dirty.
i The camera is faulty.
i The SmartMedia is not loaded
correctly.
i The SmartMedia contact area
(gold-colored area) is dirty.
i The media is damaged.
i The media format is incorrect.
i The camera is faulty.
The media is full and no further
data can be recorded.
The SmartMedia is write-
protected.
Have spare batteries ready or replace the
batteries.
i Load a SmartMedia (3.3V) in the correct
direction.
i Load a Microdrive in the correct direction.
i Format the media.
i Wipe the SmartMedia contact area with a
soft, dry cloth. It may also be necessary to
format the SmartMedia. If an error message
still appears, replace the SmartMedia.
i Contact your FUJIFILM dealer.
i Push the SmartMedia all the way into the
slot and check that it is locked into place.
i Wipe the SmartMedia contact area with a
soft, dry cloth. It may also be necessary to
format the SmartMedia. If an error message
still appears, replace the SmartMedia.
i Contact your FUJIFILM dealer.
Use a SmartMedia that is not write-protected.
Erase some images or use a media that has
some available space.
The AF (auto focus) doesn’t
work very well.
i If the subject is too dark, take the shot at a
distance of roughly 2 meters from the subject.
i Use AF lock to take the picture.
i Data cannot be recorded due
to a media fault or a problem
with the connection between
the media and the camera.
i The image you just shot is too
large to fit in the space
available on the media.
i Reload the media or switch the camera off
and then on again. If this does not remedy
the problem, contact your FUJIFILM dealer.
i Use a new media.
Frame number 999-9999 has
been reached.
Use a formatted SmartMedia to take pictures.
i You attempted to play back
file that was not recorded
correctly.
i The SmartMedia contact area
(gold-colored area) is dirty.
i The camera is faulty.
i You attempted to play back a
voice file that was recorded
on a FinePix 50i.
i That data cannot be played back.
i Wipe the SmartMedia contact area with a
soft, dry cloth. It may also be necessary to
format the SmartMedia. If an error message
still appears, replace the SmartMedia.
i Contact your FUJIFILM dealer.
i That data cannot be played back.
X
C
(Lit red)
(Blinking red)
\
i The voice memo file is faulty.
i The camera is faulty.
There is a strong likelihood of
camera shake because the
shutter speed is slow.
You attempted to erase a
protected frame.
Use flash photography. However, a tripod
should be used for some scenes and modes.
Protected frames cannot be erased. Remove
the protection using the camera on which the
protection was applied.
i The voice memo cannot be played back.
i Contact your FUJIFILM dealer.
Outside the AE continuous
range.
The shot can be taken, but the exposure will
not be correct.
Aperture/Shutter speed display
(Lit red)
