Handleiding Fuji X-Pro1 (pagina 1 van 136) (Engels)

DIGITAL CAMERA

X-Pro1

Owner’s Manual

Thank you for your purchase of this product. This

manual describes how to use your FUJIFILM X-Pro1

digital camera and install the supplied software. Be

sure that you have read and understood its contents

before using the camera.

For information on related products, visit our website at

http://www.fujifilm.com/products/digital_cameras/index.html

For more information on the X-Pro1, visit

http://fujifilm-x.com/x-pro1/

Before You Begin

First Steps

Taking Photographs

More on Photography

Viewing Pictures

Menus

Connections

Technical Notes

Troubleshooting

Appendix

EN

BL01619-201

ii

For Your Safety

• Read Instructions: All the safety and operating instructions

should be read before the appliance is operated.

• Retain Instructions: The safety and operating instructions

should be retained for future reference.

• Heed Warnings: All warnings on the appliance and in the

operating instructions should be adhered to.

• Follow Instructions: All operating and use instructions

should be followed.

Installation

Power Sources: This video product should be operated only

from the type of power source indicated on the marking la-

bel. If you are not sure of the type of power supply to your

home, consult your appliance dealer or local power com-

pany. For video products intended to operate from battery

power, or other sources, refer to the operating instructions.

Grounding or Polarization: This video product is equipped

with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will ﬁ t into the

power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing

the plug. If the plug should still fail to ﬁ t, contact your electri-

cian to replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

Alternate Warnings: This video product is equipped with

a three-wire grounding-type plug, a plug having a third

(grounding) pin. This plug will only ﬁ t into a grounding-type

power outlet. This is a safety feature. If you are unable to

insert the plug into the outlet, contact your electrician to re-

place your obsolete outlet. Do not defeat the safety purpose

of the grounding type plug.

Overloading: Do not overload wall outlets and extension

cords as this can result in a risk of ﬁ re or electric shock.

Ventilation: Slots and openings in the cabinet are provided

for ventilation, to ensure reliable operation of the video

product and to protect it from overheating, and these open-

ings must not be blocked or covered. The openings should

never be blocked by placing the video product on a bed,

sofa, rug, or other similar surface.

This video product should not be placed in a built-in instal-

lation such as a bookcase or rack unless proper ventilation

is provided or the manufacturer’s instructions have been

adhered to. This video product should never be placed near

or over a radiator or heat register.

Attachments: Do not use attachments not recommended by

the video product manufacturer as they may cause hazards.

Water and Moisture: Do not use this video product near wa-

ter—for example, near a bath tub, wash bowl, kitchen sink,

or laundry tub, in a wet basement, or near a swimming pool,

and the like.

Power-Cord Protection: Power-supply cords should be routed

so that they are not likely to be walked on or pinched by

items placed upon or against them, paying particular at-

tention to cords at plugs, convenience receptacles, and the

point where they exit from the appliance.

Accessories: Do not place this video product on an unstable

cart, stand, tripod, bracket, or table. The video product may

fall, causing serious injury to a child or adult, and serious

damage to the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or sold

with the video product. Any mounting of the appliance

should follow the manufacturer’s instructions, and should use

a mounting accessory recommended by the manufacturer.

An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

Antennas

Outdoor Antenna Grounding: If an outside antenna or cable

system is connected to the video product, be sure the anten-

na or cable system is grounded so as to provide some protec-

tion against voltage surges and built-up static charges. Sec-

tion 810 of the National Electrical Code, ANSI/NFPA No. 70,

provides information with respect to proper grounding of the

mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

Antenna Lead

in Wire

Ground Clamp

Electric Service

Equipment

Ground

Clamps

Grounding Conductors

(NEC SECTION 810-21)

Power Service Grounding Electrode

System (NEC ART 250. PART H)

Antenna

Discharge Unit

(NEC SECTION

810-20)

Power Lines: An outside antenna system should not be lo-

cated in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

Use

Cleaning: Unplug this video product from the wall outlet be-

fore cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

Object and Liquid Entry: Never push objects of any kind into this

video product through openings as they may touch dangerous

voltage points or short out parts that could result in a ﬁ re or elec-

tric shock. Never spill liquid of any kind on the video product.

Lightning: For added protection for this video product re-

ceiver during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will

prevent damage to the video product due to lightning and

power-line surges.

IMPORTANT SAFETY INSTRUCTIONS

iii

For Your Safety

Service

Servicing: Do not attempt to service this video product

yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualiﬁ ed service personnel.

Damage Requiring Service: Unplug this video product from

the wall outlet and refer servicing to qualiﬁ ed service per-

sonnel under the following conditions:

• When the power-supply cord or plug is damaged

• If liquid has been spilled, or objects have fallen into the

video product.

• If the video product has been exposed to rain or water.

• If the video product has been dropped or the cabinet has

been damaged.

If the video product does not operate normally follow the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualiﬁ ed technician to restore

the video product to its normal operation.

When the video product exhibits a distinct change in perfor-

mance — this indicates a need for service.

Replacement Parts: When replacement parts are required,

be sure the service technician has used replacement parts

speciﬁ ed by the manufacturer or have the same character-

istics as the original part. Unauthorized substitutions may

result in ﬁ re, electric shock or other hazards.

Safety Check: Upon completion of any service or repairs to

this video product, ask the service technician to perform

safety checks to determine that the video product is in

proper operating condition.

Be sure to read these notes before use

Safety Notes

• Make sure that you use your camera correctly. Read these

safety notes and your Owner’s Manual carefully before use.

• After reading these safety notes, store them in a safe place.

About the Icons

The icons shown below are used in this document to indi-

cate the severity of the injury or damage that can result if the

information indicated by the icon is ignored and the product

is used incorrectly as a result.

WARNING

This icon indicates that death or seri-

ous injury can result if the information

is ignored.

CAUTION

This icon indicates that personal injury

or material damage can result if the in-

formation is ignored.

The icons shown below are used to indicate the nature of the

instructions which are to be observed.

Triangular icons tell you that this information re-

quires attention (“Important”).

Circular icons with a diagonal bar tell you that the

action indicated is prohibited (“Prohibited”).

Filled circles with an exclamation mark indicate an

action that must be performed (“Required”).

WARNING

Unplug

from power

socket

If a problem arises, turn the camera o , remove the

battery, and disconnect and unplug the AC power

adapter. Continued use of the camera when it is

emitting smoke, is emitting any unusual odor, or

is in any other abnormal state can cause a ﬁ re or

electric shock. Contact your FUJIFILM dealer.

Do not allow water or foreign objects to enter the

camera. If water or foreign objects get inside the

camera, turn the camera oﬀ , remove the battery,

and disconnect and unplug the AC power adapt-

er. Continued use of the camera can cause a ﬁ re

or electric shock. Contact your FUJIFILM dealer.

WARNING

Do not use in

the bathroom

or shower

Do not use the camera in the bathroom or shower. This

can cause a ﬁ re or electric shock.

Do not disas-

semble

Never attempt to change or take apart the camera

(never open the case). Failure to observe this pre-

caution can cause ﬁ re or electric shock.

Do not touch

internal

parts

Should the case break open as the result of a fall or other

accident, do not touch the exposed parts. Failure to ob-

serve this precaution could result in electric shock

or in injury from touching the damaged parts. Re-

move the battery immediately, taking care to avoid

injury or electric shock, and take the product to the

point of purchase for consultation.

Do not change, heat or unduly twist or pull the connection

cord and do not place heavy objects on the connection

cord. These actions could damage the cord and

cause a ﬁ re or electric shock. If the cord is dam-

aged, contact your FUJIFILM dealer.

Do not place the camera on an unstable surface. This

can cause the camera to fall or tip over and cause

injury.

Never attempt to take pictures while in motion. Do

not use the camera while walking or driving. This

can result in you falling down or being involved in

a traﬃ c accident.

Do not touch any metal parts of the camera during a

thunderstorm. This can cause an electric shock due

to induced current from the lightning discharge.

Do not use the battery except as speci ed. Load the

battery as shown by the indicator.

Do not heat, change or take apart the battery. Do not

drop or subject the battery to impacts. Do not store the

battery with metallic products. Any of these actions

can cause the battery to burst or leak and cause

ﬁ re or injury as a result.

iv

For Your Safety

WARNING

Use only batteries or AC power adapters speci ed for

use with this camera. Do not use voltages other than

the power supply voltage shown. The use of other

power sources can cause a ﬁ re.

If the battery leaks and  uid gets in contact with your

eyes, skin or clothing,  ush the a ected area with clean

water and seek medical attention or call an emergency

number right away.

Do not use the charger to charge batteries other than those

speci ed here. The supplied charger is for use only

with batteries of the type supplied with the camera.

Using the charger to charge conventional batteries

or other types of rechargeable batteries can cause

the battery to leak, overheat or burst.

Do not use in the presence of  ammable objects, ex-

plosive gases, or dust.

When carrying the battery, install it in a digital cam-

era or keep it in the hard case. When storing the bat-

tery, keep it in the hard case. When discarding, cover

the battery terminals with insulation tape. Contact

with other metallic objects or batteries could

cause the battery to ignite or burst.

Keep memory cards out of the reach of small children.

Because memory cards are small, they can be

swallowed by children. Be sure to store memory

cards out of the reach of small children. If a child

swallows a memory card, seek medical attention

or call an emergency number.

CAUTION

Do not use this camera in locations a ected by oil

fumes, steam, humidity or dust. This can cause a ﬁ re

or electric shock.

Do not leave this camera in places subject to extremely

high temperatures. Do not leave the camera in loca-

tions such as a sealed vehicle or in direct sunlight.

This can cause a ﬁ re.

Keep out of the reach of small children. This product

could cause injury in the hands of a child.

CAUTION

Do not place heavy objects on the camera. This can

cause the heavy object to tip over or fall and

cause injury.

Do not move the camera while the AC power adapter

is still connected. Do not pull on the connection cord

to disconnect the AC power adapter. This can dam-

age the power cord or cables and cause a ﬁ re or

electric shock.

Do not cover or wrap the camera or the AC power

adapter in a cloth or blanket. This can cause heat

to build up and distort the casing or cause a ﬁ re.

When you are cleaning the camera or you do not plan

to use the camera for an extended period, remove

the battery and disconnect and unplug the AC power

adapter. Failure to do so can cause a ﬁ re or elec-

tric shock.

When charging ends, unplug the charger from the

power socket. Leaving the charger plugged into

the power socket can cause a ﬁ re.

Using a  ash too close to a person’s eyes may tempo-

rarily a ect the eyesight. Take particular care when

photographing infants and young children.

When a memory card is removed, the card could come

out of the slot too quickly. Use your  nger to hold it and

gently release the card. Injury could result to those

struck by the ejected card.

Request regular internal testing and cleaning for your

camera. Build-up of dust in your camera can cause

a ﬁ re or electric shock. Contact your FUJIFILM

dealer to request internal cleaning every two

years. Please note that this service is not free of

charge.

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

The Battery and Power Supply

Note: Check the type of battery used in your camera and

read the appropriate sections.

The following describes the proper use of batteries and how

to prolong their life. Incorrect use can shorten battery life or

cause leakage, overheating, ﬁ re, or explosion.

Li-ion Batteries

Read this section if your camera uses a rechargeable

Li-ion battery.

The battery is not charged at shipment. Charge the battery

before use. Keep the battery in its case when not in use.

■ Notes on the Battery

The battery gradually loses its charge when not in use.

Charge the battery one or two days before use.

Battery life can be extended by turning the camera oﬀ when

not in use.

Battery capacity decreases at low temperatures; a depleted

battery may not function at when cold. Keep a fully charged

spare battery in a warm place and exchange as necessary,

or keep the battery in your pocket or other warm place and

insert it in the camera only when shooting. Do not place

the battery in direct contact with hand warmers or other

heating devices.

■ Charging the Battery

Charge the battery in the supplied battery charger. Charging

times will increase at ambient temperatures below +10 °C

(+50 °F) or above +35 °C (+95 °F). Do not attempt to charge

the battery at temperatures above 40 °C (+104 °F); at tem-

peratures below 0 °C (+32 °F), the battery will not charge.

Do not attempt to recharge a fully charged battery. The bat-

tery does not however need to be fully discharged before

charging.

The battery may be warm to the touch immediately after

charging or use. This is normal.

■ Battery Life

At normal temperatures, the battery can be recharged about

300 times. A noticeable decrease in the length of time the

battery will hold a charge indicates that it has reached the

v

For Your Safety

end of its service life and should be replaced.

■ Storage

Performance may be impaired if the battery is left unused

for extended periods when fully charged. Run the battery

ﬂ at before storing it.

If the camera will not be used for an extended period, re-

move the battery and store it in a dry place with an ambient

temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do

not store in locations exposed to extremes of temperature.

■ Cautions: Handling the Battery

• Do not transport or store with metal objects such as neck-

laces or hairpins.

• Do not expose to ﬂ ame or heat.

• Do not disassemble or modify.

• Use with designated chargers only.

• Dispose of used batteries promptly.

• Do not drop or subject to strong physical shocks.

• Do not expose to water.

• Keep the terminals clean.

• The battery and camera body may become warm to the

touch after extended use. This is normal.

AA Alkaline/Rechargeable Ni-MH Batteries

Read this section if your camera uses AA alkaline or re-

chargeable AA Ni-MH batteries. Information on compat-

ible battery types may be found elsewhere in the camera

manual.

■ Cautions: Handling the Batteries

• Do not expose to water, ﬂ ame, or heat, or store in warm or

humid conditions.

• Do not transport or store with metal objects such as neck-

laces or hairpins.

• Do not disassemble or modify the batteries or battery

casing.

• Do not subject to strong physical shocks.

• Do not use batteries that are leaking, deformed, or discol-

ored.

• Keep out of reach of infants and small children.

• Insert in the correct orientation.

• Do not mix old and new batteries, batteries with diﬀ erent

charge levels, or batteries of diﬀ erent types.

• If the camera will not be used for an extended period, re-

move the batteries. Note that the camera clock will be reset.

• The batteries may be warm to the touch immediately after

use. Turn the camera oﬀ and allow the batteries to cool

before handling.

• Battery capacity tends to decrease at low temperatures.

Keep spare batteries in a pocket or other warm place and

exchange as necessary. Cold batteries may recover some

of their charge when warmed.

• Fingerprints and other stains on the battery terminals

can impair battery performance. Thoroughly clean the

terminals with a soft, dry cloth before inserting them in

the camera.

If the batteries leak, clean the battery compartment

thoroughly before inserting new batteries.

If ﬂ uid from the battery comes into contact with

skin or clothing, ﬂ ush the aﬀ ected area with water.

If  uid enters your eyes, immediately  ush the a ected

area with water and seek medical attention. Do not rub

your eyes. Failure to observe this precaution could result

in permanent visual impairment.

■ Ni-MH Batteries

The capacity of Ni-MH batteries may be temporarily reduced

when new, after long periods of disuse, or if they are repeat-

edly recharged before being fully discharged. This is nor-

mal and does not indicate a malfunction. Capacity can be

increased by repeatedly discharging the batteries using the

discharge option in the camera setup menu and recharging

them using a battery charger.

Q CAUTION: Do not use the discharge option with alkaline

batteries.

The camera draws a small amount of current even when oﬀ .

Ni-MH batteries that have been left in the camera for an ex-

tended period may be drawn down to the point that they no

longer hold a charge. Battery performance may also drop if

the batteries are run down in a device such as a ﬂ ashlight. Use

the discharge option in the camera setup menu to discharge

Ni-MH batteries. Batteries that no longer hold a charge

even after repeatedly being discharged and recharged have

reached the end of their service life and must be replaced.

Ni-MH batteries can be recharged in a battery charger (sold sep-

arately). Batteries may become warm to the touch after charg-

ing. Refer to the instructions provided with the charger for more

information. Use the charger with compatible batteries only.

Ni-MH batteries gradually lose their charge when not in use.

■ Disposal

Dispose of used batteries in accord with local regulations.

AC Power Adapters (Available Separately)

This section applies to all camera models. Use only

FUJIFILM AC power adapters designated for use with this

camera. Other adapters could damage the camera.

• The AC power adapter is for indoor use only.

• Be sure the DC plug is securely connected to the camera.

• Turn the camera oﬀ before disconnecting the adapter. Dis-

connect the adapter by the plug, not the cable.

• Do not use with other devices.

• Do not disassemble.

• Do not expose to high heat and humidity.

• Do not subject to strong physical shocks.

• The adapter may hum or become hot to the touch during

use. This is normal.

• If the adapter causes radio interference, reorient or relocate

the receiving antenna.

vi

For Your Safety

Using the Camera

Do not aim the camera at extremely bright light sources,

such as the sun in a cloudless sky. Failure to observe this

precaution could damage the camera image sensor.

Take Test Shots

Before taking photographs on important occasions (such as

at weddings or before taking the camera on a trip), take a

test shot and view the results to ensure that the camera is

functioning normally. FUJIFILM Corporation can not accept

liability for damages or lost proﬁ ts incurred as a result of

product malfunction.

Notes on Copyright

Unless intended solely for personal use, images recorded us-

ing your digital camera system cannot be used in ways that

infringe copyright laws without the consent of the owner.

Note that some restrictions apply to the photographing of

stage performances, entertainments, and exhibits, even

when intended purely for personal use. Users are also asked

to note that the transfer of memory cards containing images

or data protected under copyright laws is only permissible

within the restrictions imposed by those copyright laws.

Handling

To ensure that images are recorded correctly, do not subject

the camera to impact or physical shocks while images are

being recorded.

Liquid Crystal

In the event that the display is damaged, care should be

taken to avoid contact with liquid crystal. Take the urgent

action indicated should any of the following situations arise:

• If liquid crystal comes in contact with your skin, clean the

area with a cloth and then wash thoroughly with soap and

running water.

• If liquid crystal enters your eyes, ﬂ ush the aﬀ ected eye with

clean water for at least 15 minutes and then seek medical

assistance.

• If liquid crystal is swallowed, rinse your mouth thoroughly

with water. Drink large quantities of water and induce

vomiting, then seek medical assistance.

Although the display is manufactured using extremely high-

precision technology, it may contain pixels that are always lit

or that do not light. This is not a malfunction, and images

recorded with the product are unaﬀ ected.

Trademark Information

xD-Picture Card and E are trademarks of FUJIFILM

Corporation. The typefaces included herein are solely de-

veloped by DynaComware Taiwan Inc. Macintosh, Quick-

Time, and Mac OS are trademarks of Apple Inc. in the U.S.A.

and other countries. Windows 7, Windows Vista, and the

Windows logo are trademarks of the Microsoft group of

companies. Adobe and Adobe Reader are either trademarks

or registered trademarks of Adobe Systems Incorporated in

the U.S.A. and/or other countries. The SDHC and SDXC logos

are trademarks of SD-3C, LLC. The HDMI logo is a trademark.

YouTube is a trademark of Google Inc. All other trade names

mentioned in this manual are the trademarks or registered

trademarks of their respective owners.

Electrical Interference

This camera may interfere with hospital or aviation equip-

ment. Consult with hospital or airline staﬀ before using the

camera in a hospital or on an aircraft.

Color Television Systems

NTSC (National Television System Committee) is a color televi-

sion telecasting speciﬁ cation adopted mainly in the U.S.A., Can-

ada, and Japan. PAL (Phase Alternation by Line) is a color televi-

sion system adopted mainly in European countries and China.

Electrical Interference

Exif Print is a newly revised digital camera ﬁ le format in

which information stored with photographs is used for opti-

mal color reproduction during printing.

IMPORTANT NOTICE: Read Before Using the Software

Direct or indirect export, in whole or in part, of licensed soft-

ware without the permission of the applicable governing

bodies is prohibited.

vii

For Your Safety

NOTICES

To prevent  re or shock hazard, do not expose the unit

to rain or moisture.

Please read the “Safety Notes” and make sure you un-

derstand them before using the camera.

Perchlorate Material—special handling may apply. See

http://www.dtsc.ca.gov/hazardouswaste/perchlorate.

For Customers in the U. S. A.

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

FCC Statement: This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including

interference that may cause undesired operation.

CAUTION: This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular in-

stallation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment oﬀ and on, the user is encouraged

to try to correct the interference by one or more of the fol-

lowing measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit diﬀ erent

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

• You are cautioned that any changes or modiﬁ cations not

expressly approved in this manual could void the user’s

authority to operate the equipment.

Notes on the Grant: To comply with Part 15 of the FCC Rules,

this product must be used with a Fujiﬁ lm-speciﬁ ed ferrite-

core A/V cable, USB cable, and DC supply cord.

For Customers in Canada

CAUTION: This Class B digital apparatus complies with Cana-

dian ICES-003.

Disposal of Electrical and Electronic Equipment in Private

Households

In the European Union, Norway, Iceland and Liechten-

stein: This symbol on the product, or in the man-

ual and in the warranty, and/or on its packaging

indicates that this product shall not be treated as

household waste. Instead it should be taken to

an applicable collection point for the recycling

of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will

help prevent potential negative consequences to the en-

vironment and human health, which could otherwise be

caused by inappropriate waste handling of this product.

This symbol on the batteries or accumulators in-

dicates that those batteries shall not be treated

as household waste.

If your equipment contains easy removable batteries or

accumulators please dispose these separately according to

your local requirements.

The recycling of materials will help to conserve natural re-

sources. For more detailed information about recycling this

product, please contact your local city oﬃ ce, your household

waste disposal service or the shop where you purchased the

product.

In Countries Outside the European Union, Norway, Iceland and

Liechtenstein: If you wish to discard this product, including

the batteries or accumulators, please contact your local au-

thorities and ask for the correct way of disposal.

viii

About This Manual

Before using the camera, read this manual and the warnings in “For Your Safety” (P ii). For information

on speci c topics, consult the sources below.

Task Index

............................................................

P

ix

Table of Contents

.................................................

P

xii

Know what you want to do but don’t know the

name for it? Find the answer in the “Task Index.”

The “Table of Contents” gives an overview of the

entire manual. The principal camera operations

are listed here.

Troubleshooting

................................................

P

102

Warning Messages and Displays

.........................

P

106

Having a speci c problem with the camera?

Find the answer here.

Find out what’s behind that  ashing icon or error

message in the display.

Glossary

............................................................

P

109

Restrictions on Camera Settings

..........................

P

116

The meanings of some technical terms may be

found here.

See page 116 for restrictions on the options avail-

able in each shooting mode.

Memory Cards

Pictures are stored on optional SD, SDHC, and SDXC memory cards (P 16), referred to in this manual as “memory

cards.”

ix

Task Index

Find items by task.

■ Exchanging Lenses

Attaching lenses .....................................................................11

Removing lenses ....................................................................11

■ Taking Photographs

The optical view nder ........................................................20

Power management ............................................................23

The self-timer ...........................................................................41

■ Choosing Image Quality and Size

Image size ..................................................................................67

Image quality ...........................................................................67

RAW images ..............................................................................53

Color space ................................................................................83

■ Focusing

Focus mode ..............................................................................45

Focus frame selection .........................................................47

Focus lock ...................................................................................43

Manual focus ............................................................................45

■ Adjusting Exposure

ISO sensitivity ...........................................................................48

Metering ...................................................................................... 49

Program autoexposure ......................................................24

Shutter priority autoexposure .......................................25

Aperture priority autoexposure ....................................26

Manual exposure ...................................................................27

Long time exposures ...........................................................28

Exposure lock ...........................................................................43

Exposure compensation ...................................................29

■ Adjusting Colors to the Light Source

White balance ..........................................................................32

Film simulation ........................................................................51

Dynamic range .......................................................................68

Color/tone/sharpness ................................................. 68, 69

x

Task Index

■ Choosing a Drive Mode

Burst photography................................................................34

Bracketing ..................................................................................35

Panoramas .................................................................................37

Movies ..........................................................................................39

■ Using the Flash

Flash photography ...............................................................54

Flash mode ................................................................................54

Flash compensation ............................................................72

Optional  ash units ......................................................54, 97

■ Custom Settings

Assigning a role to the Fn button ................................50

Saving and recalling settings .........................................52

xi

Product Care

Camera body: For continued enjoyment of your camera, use a soft, dry cloth to clean the camera body

after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform

the leather on the camera body. Any liquid on the camera should be removed immediately with a

soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then

gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece

of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning  uid has been applied. To

prevent dust entering the camera, replace the body cap when not lens is in place.

Image sensor: Dust can be removed from the image sensor using the V SENSOR CLEANING option in

the setup menu (P 82).

Lenses: Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can

be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to which a small amount of

lens-cleaning  uid has been applied. Replace the front and rear caps when the lens is not use.

xii

Table of Contents

For Your Safety ..................................................................................... ii

IMPORTANT SAFETY INSTRUCTIONS .........................................ii

Safety Notes .......................................................................................iii

NOTICES ..............................................................................................vii

About This Manual .......................................................................... viii

Task Index .............................................................................................ix

Product Care ........................................................................................xi

Before You Begin

Symbols and Conventions ..............................................................1

Supplied Accessories ........................................................................1

Parts of the Camera ...........................................................................2

The Selector ........................................................................................4

The Command Dial ..........................................................................4

The Q (Quick Menu) Button ...........................................................5

Camera Displays ................................................................................6

Shooting: Optical View nder ....................................................6

Shooting: Electronic View nder ............................................... 7

Shooting: LCD Monitor ................................................................7

Playback: Electronic View nder/LCD Monitor ....................8

First Steps

Attaching the Strap ...........................................................................9

Attaching a Lens .............................................................................. 11

Charging the Battery ..................................................................... 12

Inserting the Battery and a Memory Card ........................... 13

Compatible Memory Cards ..................................................... 16

Turning the Camera on and O ................................................ 17

Basic Setup ......................................................................................... 18

Choosing a Display ......................................................................... 19

Using the Hybrid View nder ..................................................... 20

The DISP/BACK Button ....................................................................... 21

Optical View nder: Shooting ................................................. 21

Electronic View nder: Shooting............................................ 21

LCD Monitor: Shooting ............................................................. 21

Electronic View nder/LCD Monitor: Playback ................. 22

Power Management ....................................................................... 23

Taking Photographs

Program AE (P) .................................................................................. 24

Shutter-Priority AE (S) ................................................................... 25

Aperture-Priority AE (A) ............................................................... 26

Manual Exposure (M) ..................................................................... 27

Long Time-Exposures (T/B) ......................................................... 28

Time (T) .............................................................................................. 28

Bulb (B) ............................................................................................... 28

Exposure Compensation .............................................................. 29

Focusing and Taking Pictures .................................................... 30

xiii

Table of Contents

More on Photography

F Macro Mode (Close-ups) ......................................................... 31

White Balance ................................................................................... 32

I Continuous Shooting (Burst Mode) .................................. 34

Bracketing ........................................................................................... 35

Multiple Exposures ......................................................................... 36

Panoramas .......................................................................................... 37

F Recording High-De nition (HD) Movies ......................... 39

Before Recording ........................................................................... 40

h Using the Self-Timer ................................................................. 41

Focus/Exposure Lock ..................................................................... 43

Focus Mode ........................................................................................ 45

Focus Frame Selection .................................................................. 47

Sensitivity ........................................................................................... 48

Metering .............................................................................................. 49

The Fn Button .................................................................................... 50

Film Simulation ................................................................................ 51

Saving Settings ................................................................................. 52

Recording Pictures in RAW Format ......................................... 53

N Flash Photography...................................................................... 54

Viewing Pictures

Viewing Pictures Full Frame ....................................................... 56

Viewing Photo Information ....................................................... 57

Playback Zoom ............................................................................... 57

Multi-Frame Playback ................................................................... 58

Viewing Movies ................................................................................ 59

Image Search ..................................................................................... 60

m PhotoBook Assist ...................................................................... 61

Creating a PhotoBook .................................................................. 61

Viewing Photobooks .................................................................... 62

Editing and Deleting Photobooks ........................................... 62

Viewing Panoramas ........................................................................ 63

Viewing Pictures Taken in a Single Burst .............................. 64

x Deleting Pictures ....................................................................... 65

Creating JPEG Copies of RAW Pictures .................................. 66

xiv

Table of Contents

Menus

Using the Menus: Shooting Mode ........................................... 67

Shooting Menu Options.............................................................. 67

N ISO .............................................................................................. 67

O IMAGE SIZE .............................................................................. 67

T IMAGE QUALITY .................................................................... 67

U DYNAMIC RANGE.................................................................. 68

P FILM SIMULATION ................................................................ 68

X FILM SIMULATION BKT ....................................................... 68

B SELF-TIMER .............................................................................. 68

D WHITE BALANCE ................................................................... 68

f COLOR ....................................................................................... 68

q SHARPNESS ............................................................................. 69

r HIGHLIGHT TONE .................................................................. 69

s SHADOW TONE ..................................................................... 69

h NOISE REDUCTION ............................................................... 69

K LONG EXPOSURE NR ........................................................... 69

u SELECT CUSTOM SETTING ................................................ 69

K EDIT/SAVE CUSTOM SETTING .......................................... 69

F AF MODE .................................................................................. 69

G CORRECTED AF FRAME ...................................................... 70

l FOCAL LENGTH SETTING ................................................... 70

m SHOOT WITHOUT LENS ...................................................... 70

F Fn BUTTON .............................................................................. 70

n MULTIPLE EXPOSURE .......................................................... 70

v DISP. CUSTOM SETTING ..................................................... 71

c FRAMING GUIDLINE ............................................................ 71

C AF ILLUMINATOR .................................................................. 72

k AE/AF-LOCK MODE .............................................................. 72

v AE/AF-LOCK BUTTON.......................................................... 72

m AUTOROTATE PB ................................................................... 72

p FLASH MODE ......................................................................... 72

I FLASH ........................................................................................ 72

B RED EYE REMOVAL ............................................................... 73

n SAVE ORG IMAGE .................................................................. 73

W MOVIE MODE ......................................................................... 73

Using the Menus: Playback Mode............................................ 74

Playback Menu Options .............................................................. 74

j RAW CONVERSION ............................................................... 74

A ERASE ........................................................................................ 74

G CROP .......................................................................................... 74

e RESIZE ....................................................................................... 75

D PROTECT .................................................................................. 75

C IMAGE ROTATE ....................................................................... 75

B RED EYE REMOVAL ............................................................... 76

I SLIDE SHOW ........................................................................... 76

m PHOTOBOOK ASSIST ........................................................... 77

j MARK FOR UPLOAD TO ...................................................... 77

b IMAGE SEARCH ...................................................................... 77

K PRINT ORDER (DPOF) .......................................................... 77

J DISP ASPECT ........................................................................... 78

I PLAYBACK VOLUME ............................................................. 78

xv

Table of Contents

The Setup Menu ...............................................................................

79

Using the Setup Menu ................................................................. 79

Setup Menu Options .................................................................... 80

F DATE/TIME ............................................................................... 80

N TIME DIFFERENCE ................................................................. 80

L a ................................................................................ 80

R RESET ......................................................................................... 80

o SILENT MODE ......................................................................... 80

B FRAME NO. .............................................................................. 81

I FOCUS RING ............................................................................ 81

J LCD BRIGHTNESS .................................................................. 81

U POWER SAVE MODE ............................................................ 81

H QUICK START MODE ............................................................ 81

M AUTO POWER OFF ................................................................ 82

G OPERATION VOL. ...................................................................82

A IMAGE DISP. ............................................................................. 82

V SENSOR CLEANING .............................................................. 82

J COLOR SPACE ......................................................................... 83

c GUIDANCE DISPLAY ............................................................. 83

M FOCUS SCALE UNITS ........................................................... 83

O BACKGROUND COLOR ........................................................ 83

K FORMAT .................................................................................... 83

Connections

Viewing Pictures on TV ................................................................. 84

Printing Pictures via USB ............................................................. 85

Connecting the Camera .............................................................. 85

Printing Selected Pictures .......................................................... 85

Printing the DPOF Print Order .................................................. 86

Creating a DPOF Print Order...................................................... 87

WITH DATE s/ WITHOUT DATE ............................................ 88

RESET ALL ....................................................................................... 89

Viewing Pictures on a Computer .............................................. 90

Windows: Installing MyFinePix Studio .................................. 90

Macintosh: Installing FinePixViewer ....................................... 92

Connecting the Camera .............................................................. 94

xvi

Table of Contents

Technical Notes

Optional Accessories...................................................................... 96

Accessories from FUJIFILM ......................................................... 96

Recommended Third-Party Accessories ............................... 98

Connecting the Camera to Other Devices ........................... 99

Caring for the Camera ................................................................. 100

Storage and Use ...........................................................................100

Traveling .......................................................................................... 100

Cleaning the Image Sensor .......................................................101

Troubleshooting

Problems and Solutions .............................................................102

Warning Messages and Displays ............................................ 106

Appendix

Glossary .............................................................................................109

Memory Card Capacity ...............................................................110

Speci cations ..................................................................................111

Restrictions on Camera Settings ............................................ 116

1

Before You Begin

Symbols and Conventions

The following symbols are used in this manual:

Q This information should be read before use to ensure correct operation.

R Additional information that may be helpful when using the camera.

P Other pages in this manual on which related information may be found.

Menus and other text in the displays are shown in bold. In the illustrations in this manual, displays may

be simpli ed for explanatory purposes.

Supplied Accessories

The following items are included with the camera:

NP-W126 rechargeable battery BC-W126 battery charger Body cap USB cable

• Owner’s Manual (this

manual)

• Shoulder strap

• Protective covers (× 2)

• Diopter adjustment lens

(comes installed in camera)

CD-ROM Clip attaching tool Metal strap clips (× 2)

2

Parts of the Camera

For more information, refer to the page listed to the right of each item.

1 Shutter button ..................................................30

2 Exposure compensation dial .............................29

3 Shutter speed dial ........................... 24, 25, 26, 27

4 Dial release .................................................25, 27

5 AF-assist illuminator .........................................72

Self-timer lamp ................................................41

6 Hot shoe .....................................................55, 99

7 View nder window ..........................................20

8 Strap eyelet ........................................................9

9 Speaker .............................................................59

10 Sync terminal ....................................................55

11 Focus mode selector .........................................45

12 Lens signal contacts ..........................................11

13 Lens release button ..........................................11

14 View nder selector ...........................................20

15 Microphone ......................................................39

16 ON/OFF switch .................................................17

17 Fn (Function) button ........................................50

18 Battery chamber ...............................................13

19 Memory card slot ..............................................14

20 Battery latch ...............................................13, 15

21 Eye sensor .........................................................19

22 Command dial ....................................................4

23 Connector cover ....................................84, 85, 94

24 Cable channel cover for DC coupler

25 Battery-chamber cover latch ......................13, 14

26 Battery-chamber cover .....................................13

27 Tripod mount

28 LCD monitor ........................................................6

29 HDMI mini connector ........................................84

30 USB connector ............................................85, 94

31 Body cap ...........................................................11

3

Before You Begin

Parts of the Camera

36 Q (quick menu) button .......................................5

37 MENU/OK button ...............................................4

38 Selector ..............................................................4

39 DISP (display)/BACK button ............................21

o (silent mode) button ..................................30

40 AF (autofocus) button ................................46, 47

b (delete) button ............................................56

41 AE (autoexposure) button ................................49

n (playback zoom out) button .................57, 58

42 DRIVE button ...................................................34

k (playback zoom in) button ....................57, 58

43 Diopter adjustment lens ...............................6, 98

32 VIEW MODE button .........................................19

33 Indicator lamp (see below)

34 a (playback) button ......................................56

35 AFL/AEL (focus lock/exposure) button .......43, 45

The Indicator Lamp

The indicator lamp shows camera status as follows:

Indicator lamp

Camera status

Glows green

Glows green Focus locked.

Blinks green

Blinks green Blur, focus, or exposure warning. Picture can be taken.

Blinks green and orange

Blinks green and orange Recording pictures. Additional pictures can be taken.

Glows orange

Glows orange Recording pictures. No additional pictures can be taken at this time.

Blinks red

Blinks red Lens or memory error.

Indicator lamp

R Warnings may also appear in the display (P 106).

4

Parts of the Camera

The Selector

Press the selector up (

q

), right

(

w

), down (

e

), or left (

r

) to

highlight items and press MENU/

OK (

t

) to select. Pressing the

selector up (MACRO) during

shooting displays macro op-

tions (P 31).

Control Lock

To avoid accidentally displaying macro options dur-

ing shooting, press MENU/OK until X is displayed. The

control can be unlocked by pressing MENU/OK until X

is no longer displayed.

The Command Dial

The command dial can be used to navi-

gate the menus, to view the most re-

cent picture (P 56), and to select op-

tions in the quick menu display (P 5).

Press the center of the command dial

to zoom in on the focus area selected

for manual focus (P 46) or the active fo-

cus point during playback (P 57).

5

Before You Begin

Parts of the Camera

The

Q

(Quick Menu) Button

Press Q for quick access to the following items:

Option

P

u

SELECT CUSTOM SETTING

52

N

ISO

48

U

DYNAMIC RANGE

68

D

WHITE BALANCE

32

h

NOISE REDUCTION

69

O

IMAGE SIZE

67

Option

P

T

IMAGE QUALITY

67

P

FILM SIMULATION

51

r

HIGHLIGHT TONE

69

s

SHADOW TONE

69

f

COLOR

68

q

SHARPNESS

69

Option

P

B

SELF-TIMER

41

F

AF MODE

69

I

FLASH MODE

54

J

LCD BRIGHTNESS

81

1

Press Q to display the quick menu during shooting.

2

Use the selector to highlight items and rotate the command dial to change.

3

Press Q to exit when settings are complete.

R For quick access to custom settings banks, press and hold the Q button.

6

Parts of the Camera

Camera Displays

The following types of indicator may be displayed during shooting and playback. Indicators vary with

camera settings.

■ Shooting: Optical View nder

0.1 0.5 1.0 1.5 2.0 3.0 5.0 10

F

100

F5.6

200

2000

P

F

100

1 Manual focus indicator .....................................45

2 Flash mode .......................................................54

3 Metering ...........................................................49

4 White balance ...................................................32

5 Film simulation .................................................51

6 Dynamic range .................................................68

7 Number of available frames ......................81, 110

8 Image quality and size ......................................67

9 Battery level .....................................................17

10 Focus frame ................................................43, 47

11 Virtual horizon ..................................................71

12 Temperature warning .....................................108

13 Bright frame

14 Distance indicator .......................................45, 83

15 Sensitivity .........................................................48

16 Aperture ...............................................24, 26, 27

17 Shutter speed .......................................24, 25, 27

18 Shooting mode ..........................24, 25, 26, 27, 28

19 Histogram .........................................................22

20 Exposure compensation/

exposure indicator ......................................27, 29

View nder Focus

View nder focus can be adjusted using diopter ad-

justment lenses available separately from third-party

suppliers (P 98).

Displayed if the edges of the

picture are outside the bor-

ders of the EVF.

7

Before You Begin

Parts of the Camera

■ Shooting: Electronic View nder

0.1 0.5 1.0 1.5 2.0 3.0 5.0 10

F

100

P

2000 F5.6 200

1 Flash mode .......................................................54

2 Macro (close-up) mode .....................................31

3 Self-timer indicator ..........................................41

4 Continuous mode .............................................34

5 White balance ...................................................32

6 Film simulation .................................................51

7 Dynamic range .................................................68

8 Focus frame ................................................43, 47

9 Number of available frames ......................81, 110

10 Image quality and size ......................................67

11 Temperature warning .....................................108

12 Blur warning ...................................................106

13 Focus warning ..........................................30, 106

14 Silent mode indicator .................................30, 80

15 Distance indicator .......................................45, 83

16 Battery level .....................................................17

17 Sensitivity .........................................................48

18 Aperture ...............................................24, 26, 27

19 Shutter speed .......................................24, 25, 27

20 Metering ...........................................................49

21 Shooting mode ..........................24, 25, 26, 27, 28

22 Manual focus indicator .....................................45

23 Exposure compensation/

exposure indicator ......................................27, 29

24 Histogram .........................................................22

25 Virtual horizon ..................................................71

26 Depth-of- eld preview .....................................26

■ Shooting: LCD Monitor

F

2000

1F5.6

000100

P

200

1 Flash mode .......................................................54

2 Macro (close-up) mode .....................................31

3 Metering ...........................................................49

4 Continuous mode .............................................34

5 Silent mode indicator .................................30, 80

6 Number of available frames ......................81, 110

7 Temperature warning .....................................108

8 Image quality and size ......................................67

9 Dynamic range .................................................68

10 Film simulation .................................................51

11 White balance ...................................................32

12 Battery level .....................................................17

13 Sensitivity .........................................................48

14 Aperture ...............................................24, 26, 27

15 Focus frame/focus point .............................43, 47

16 Shutter speed .......................................24, 25, 27

17 Shooting mode ..........................24, 25, 26, 27, 28

18 Focus mode ......................................................45

19 Self-timer indicator ..........................................41

20 Exposure compensation/

exposure indicator ......................................27, 29

8

Parts of the Camera

■ Playback: Electronic View nder/LCD Monitor

100-0001

12 / 31 / 2050

1/1000 F4.5

200

10 :00

AM

10 :00

AM

2

-

1

3

3:2

F

YouTube

1 Rating ...............................................................56

2 Red-eye removal indicator ................................73

3 Silent mode indicator .................................30, 80

4 Gift image .........................................................56

5 Frame number ..................................................81

6 Playback mode indicator...................................56

7 Mark for upload to ............................................77

8 Photobook assist indicator ................................61

9 DPOF print indicator .........................................87

10 Protected image ...............................................75

9

First Steps

Attaching the Strap

Attach the strap clips to the camera and then attach the strap.

1

Open a strap clip.

Use the clip attaching tool to open a strap clip

as shown.

Q Keep the tool in a safe place. You will need it to

open the strap clips when removing the strap.

2

Place the strap clip on an eyelet.

Hook the strap eyelet in the clip opening. Re-

move the tool, using the other hand to keep

the clip in place.

3

Pass the clip through the eyelet.

Rotate the clip fully through

the eyelet until it clicks

closed.

4

Attach a protective cover.

Place a protective cover over the eyelet as

shown, with the black side of the cover toward

the camera. Repeat Steps 1–4 for the second

eyelet.

10

Attaching the Strap

5

Insert the strap.

Insert the strap through a protective cover

and strap clip.

6

Fasten the strap.

Fasten the strap as shown. Repeat Steps 5–6

for the second eyelet.

Q To avoid dropping the camera, be sure the strap is

correctly secured.

11

First Steps

Attaching a Lens

Lenses attach as described below.

Q Care is required to prevent dust entering the camera while attaching and removing lenses.

1

Remove the body and rear caps.

Remove the body cap from the camera and

the rear cap from the lens.

Q Do not touch the camera’s internal parts.

2

Attach the lens.

Place the lens on mount, keeping the marks

on the lens and camera aligned, and then ro-

tate the lens until it clicks into place.

Q Do not press the lens release button while at-

taching the lens.

Removing Lenses

To remove the lens, turn the

camera o , then press the

lens release button and rotate

the lens as shown.

Lens release button

Q To prevent dust accumulating inside the camera, replace

the body cap when no lens is attached.

Supported Lenses (

P

96)

The camera can be used with optional XF18mmF2 R,

XF35mmF1.4 R, and XF60mmF2.4 R Macro inter-

changeable lenses.

12

Charging the Battery

The battery is not charged at shipment. Charge the battery before use.

1

Place the battery in the charger.

Place the battery in the supplied battery char-

ger as shown.

Battery charger

Battery

Charge lamp

Arrow

The camera uses an NP-W126 rechargeable bat-

tery.

2

Plug the charger in.

Plug the charger into a power outlet. The

charging indicator will light.

The Charging Indicator

The charging indicator shows battery charge sta-

tus as follows:

Charging

indicator

Battery status

Action

O

Battery not

inserted.

Insert the battery.

Battery fully

charged.

Remove the battery.

On

Battery charging.

—

Blinks

Battery fault.

Unplug the charger

and remove the

battery.

3

Charge the battery.

Remove the battery when charging is com-

plete. See the speci cations (P 114) for charg-

ing times (note that charging times increase

at low temperatures).

Q Unplug the charger when it is not in use.

13

First Steps

Inserting the Battery and a Memory Card

The camera has no internal memory; instead, pictures are stored on optional SD, SDHC, and SDXC

memory cards (sold separately). After charging the battery, insert the battery and memory card as

described below.

1

Open the battery-chamber cover.

Slide the battery-chamber latch as shown and

open the battery-chamber cover.

Q Do not open the battery-chamber cover when

the camera is on. Failure to observe this precau-

tion could damage image  les or memory cards.

Q Do not use excessive force when handling the

battery-chamber cover.

2

Insert the battery.

Insert the battery as shown inside the battery

chamber, using the battery to keep the bat-

tery latch pressed to one side.

Battery latch

Arrow

Q Insert the battery in the correct orientation. Do

not use force or attempt to insert the battery up-

side down or backwards. The battery will slide in

easily in the correct orientation.

14

Inserting the Battery and a Memory Card

3

Insert the memory card.

Holding the memory

card in the orientation

shown at right, slide

it in until it clicks into

place at the back of

the slot.

Click

Q Be sure card is in the correct orientation; do not

insert at an angle or use force.

Q SD/SDHC/SDXC memo-

ry cards can be locked,

making it impossible to

format the card or to

record or delete images.

Before inserting a memory card, slide the write-

protect switch to the unlocked position.

4

Close the battery-chamber cover.

Slide the battery-chamber latch as shown and

close the battery-chamber cover.

Write-protect switch

15

First Steps

Inserting the Battery and a Memory Card

Removing the Battery and Memory Card

Before removing the battery or memory card, turn

the camera o and open the battery-chamber cover.

To remove the battery, press

the battery latch to the side,

and slide the battery out of

the camera as shown.

Battery latch

To remove the memory card,

press it in and release it slowly.

The card can then be removed

by hand. When a memory card

is removed, the card could come out of the slot too

quickly. Use your  nger to hold it and gently release

the card.

Q

Batteries

• Remove dirt from the battery terminals with a clean,

dry cloth. Failure to observe this precaution could

prevent the battery from charging.

• Do not a x stickers or other objects to the battery.

Failure to observe this precaution could make it im-

possible to remove the battery from the camera.

• Do not short the battery terminals. The battery could

overheat.

• Read the cautions in “The Battery and Power Supply”

(

P iv).

• Use only battery chargers designated for use with the

battery. Failure to observe this precaution could re-

sult in product malfunction.

• Do not remove the labels from the battery or attempt

to split or peel the outer casing.

• The battery gradually loses its charge when not in

use. Charge the battery one or two days before use.

16

Inserting the Battery and a Memory Card

■ Compatible Memory Cards

FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the cam-

era. A complete list of approved memory cards is available at http://www.fujifilm.com/support/digital_

cameras/compatibility/. Operation is not guaranteed with other cards. The camera can not be used

with xD-Picture Cards or MultiMediaCard (MMC) devices.

Q

Memory Cards

• Do not turn the camera o or remove the memory card while the memory card is being formatted or data are

being recorded to or deleted from the card. Failure to observe this precaution could damage the card.

• Format memory cards before  rst use, and be sure to reformat all memory cards after using them in a computer

or other device. For more information on formatting memory cards, see page 83.

• Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card,

seek medical assistance immediately.

• miniSD or microSD adapters that are larger or smaller than the standard dimensions of an SD/SDHC/SDXC card

may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do

not forcibly remove the card.

• Do not a x labels to memory cards. Peeling labels can cause camera malfunction.

• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory card. Use a G card or

better when shooting HD movies.

• Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete

this folder or use a computer or other device to edit, delete, or rename image  les. Always use the camera to

delete pictures; before editing or renaming  les, copy them to a computer and edit or rename the copies, not

the originals. Renaming the  les on the camera can cause problems during playback.

17

First Steps

Turning the Camera on and O

Rotate the ON/OFF switch to ON to turn the camera on. Select OFF to turn

the camera o .

R Press the a button to start playback. Press the shutter button halfway to

return to shooting mode.

R The camera will turn o automatically if no operations are performed for the

length of time selected for M AUTO POWER OFF (P 82). To reactivate the camera after it has turned o auto-

matically, press the shutter button halfway or turn the ON/OFF switch to OFF and then back to ON.

R For information on other power saving and startup options, see page 23.

Q Fingerprints and other marks on the lens or view nder can a ect pictures or the view through the view nder.

Keep the lens and view nder clean.

Battery Level

After turning the camera on, check the battery level in the display.

Indicator

Description

D (white)

Battery partially discharged.

C (white)

Battery more than half discharged

B (red)

Low battery. Charge as soon as possible.

A (blinks red)

Battery exhausted. Turn camera o and recharge battery.

P

18

Basic Setup

A language-selection dialog is displayed the  rst time the camera is turned on. Set up the camera as

described below (you can reset the clock or change languages at any time using the F DATE/TIME

or L a options in the setup menu; for information on displaying the setup menu, see page 80).

1

Choose a language.

START MENU

NOSET

ENGLISH

DEUTSCH

FRANCAIS

Highlight a language and press MENU/OK.

R Press DISP/BACK to skip the current step. Any steps you skip will be displayed

the next time the camera is turned on.

2

Set the date and time.

NOSET

DATE / TIME NOT SET

1. 1 12

:

00

AM

YY. MM. DD

2014

2013

2011

2010

2012

Press the selector left or right to highlight the year, month, day, hour,

or minute and press up or down to change. To change the order in

which the year, month, and day are displayed, highlight the date for-

mat and press the selector up or down. Press MENU/OK to exit to shoot-

ing mode when settings are complete.

R If the battery is removed for an extended period, the camera clock will be reset and the language-selection

dialog will be displayed when the camera is turned on.

19

First Steps

Choosing a Display

The camera is equipped with a hybrid optical/electronic view nder

(OVF/EVF) and an LCD monitor (LCD). Press VIEW MODE to choose a dis-

play.

LCD

OVF/EVF OVF/EVF

LCD

Automatic display selection

using eye sensor

View nder only LCD monitor only

Automatic Display Selection

In this mode, the view nder turns on automatically when you put your eye to the view-

 nder, and the LCD monitor turns on when you take your eye away (note that the eye sensor

may respond to objects other than your eye or to light shining directly on the sensor).

Eye sensor

20

Choosing a Display

Using the Hybrid View nder

Use the view nder selector to

choose between optical and

electronic view nders. Keep

the selector pressed up to

choose the optical view nder

display zoom ratio.

0.1 0.5 1.0 1.5 2.0 3.0 5.0 10

F5.6

200

2000

P

0.1 0.5 1.0 1.5 2.0 3.0 5.0 10

P

2000 F5 .6 200

Optical view nder display Electronic view nder display

Choosing a Display

Choose a display according to the task.

Display

Description

Optical

view nder

(OVF)

This display is immune from digital video ef-

fects and allows the subject to be viewed di-

rectly with no display lag. Subjects are always

in focus, allowing you to check their expression

at any time, while a  eld of view slightly larger

than that of the lens makes it easier to locate

your subject without removing your eye from

the view nder. The view nder window is how-

ever at a slight distance from the lens, with the

result that the display in the view nder may

di er slightly from the  nal photograph due to

parallax.

Electronic

view nder

(EVF)

This display shows the view through the lens

and has exactly the same  eld of view, allowing

you to frame your subjects precisely and pre-

view focus, depth of  eld, exposure, and white

balance (although there may be a slight display

lag). It can also be used to view photographs

after shooting.

LCD

monitor

This display is identical to the electronic view-

 nder, except that its large size makes it easier

to view shooting indicators and the view

through the lens. It may however be di cult

to see in bright light.

21

First Steps

The

DISP/BACK

Button

The DISP/BACK button controls the display of indicators in the view nder and LCD monitor.

■ Optical View nder: Shooting

0.1 0.5 1.0 1.5 2.0 3.0 5.0 10

F5.6

200

2000

P

F

100

0.1 0.5 1.0 1.5 2.0 3.0 5.0 10

F5.6

200

2000

P

Standard display Custom display

■ Electronic View nder: Shooting

0.1 0.5 1.0 1.5 2.0 3.0 5.0 10

P

2000 F5 .6 200

0.1 0.5 1.0 1.5 2.0 3.0 5.0 10

F

100

P

2000 F5 .6 200

Standard display Custom display

■ LCD Monitor: Shooting

Detailed display Standard display

F

2000

1F5.6

000100

P

200

0.1 0.5 1.0 1.5 2.0 3.0 5.0 10

P

2000 F5 .6 200

0.1 0.5 1.0 1.5 2.0 3.0 5.0 10

F

100

P

2000 F5 .6 200

Custom display

Custom Display

Choose items for display using v DISP. CUSTOM SETTING in the shooting menu (P 71):

Framing grid Exposure (shutter speed, aperture, and sensitivity) Film simulation

Virtual horizon Exposure compensation/exposure indicator Dynamic range

Focus distance (autofocus) Metering Number of exposures remaining/media

Focus distance (manual focus) Flash mode Image quality and size

Histogram White balance Battery level

R See pages 6 – 7 for the locations of these items in the displays.

22

The DISP/BACK Buttion

■ Electronic View nder/LCD Monitor: Playback

Indicators displayed Indicators hidden Favorites Photo information

100-0001

12 /31 /2050

1 /1000 F4 .5

10 : 00

AM

10 : 00

AM

2

-

1

3

3:2

F

200

100-0001

3

12 /31 /2050 10: 00

AM

:

: OFF

ISO

200

1/1000

F

4.5

2

3

-

1

12 /31 /2050 10: 00

AM

100-0001

3:2

F

Q The optical view nder can not be used for playback.

Histograms

Histograms show the distribution of tones in the im-

age. Brightness is shown by the horizontal axis, the

number of pixels by the vertical axis.

Pixel brightness

No. of pixels

Shadows Highlights

Optimal exposure: Pixels are distrib-

uted in an even curve through-

out the tone range.

Overexposed: Pixels are clustered

on the right side of the graph.

Underexposed: Pixels are clustered

on the left side of the graph.

23

First Steps

Power Management

The setup menu contains the following power management options (P 81). For information on using

the setup menu, see page 79.

• U POWER SAVE MODE: Select ON to increase the number of photographs that can be taken with a

fully-charged battery.

• H QUICK START MODE: Select ON to reduce camera startup time.

U

POWER SAVE MODE

OFF

ON

H

QUICK START MODE

OFF

Startup time

0.5 s

1.0 s

Standby time

2 minutes

—

Endurance

300 shots

350 shots (1,000 shots when optical view nder

is used)

ON

Startup time

0.5 s

Standby time

24 minutes

10 minutes

Endurance

150 shots

250 shots (400 shots when optical view nder is

used)

R All  gures are approximate. The values for endurance are measured under FUJIFILM test conditions and may

vary depending on how the camera is used.

24

Taking Photographs

Program AE (P)

To allow the camera to adjust both shutter speed and aperture

for optimal exposure, rotate the shutter speed dial and lens aper-

ture ring to A. P will appear in the display.

Q If the subject is outside the metering range of the camera, the shutter

speed and aperture displays will show “– – –”.

16 11 8 5.6

A

F5.6

200

2000

P

2000 F5 .6 200

Optical view nder EVF/LCD

Program Shift

If desired, you can press the selector left or right to other combinations of shutter

speed and aperture without altering exposure (program shift). Program shift is not

available if the attached  ash supports TTL auto, AUTO is selected for U DYNAM-

IC RANGE in the shooting menu (P 68), or an auto option is selected for N ISO in

the shooting menu (P48).

P

2000 F5 .6 200

Shutter speed

Aperture

25

Taking Photographs

Shutter-Priority AE (S)

To adjust shutter speed manually while letting the camera select

aperture for optimal exposure, rotate the lens aperture ring to A

and use the shutter speed dial (if A is currently selected for shut-

ter speed, press the dial release while rotating the shutter speed

dial). S will appear in the display.

Q If the correct exposure can not be achieved at the selected shutter

speed, aperture will be displayed in red when the shutter button is

pressed halfway. Adjust shutter speed until the correct exposure is

achieved.

Q If the subject is outside the metering range of the camera, the aper-

ture display will show “–––”.

16 11 8 5.6

A

F5.6

200

2000

S

2000 F5 .6 200

Optical view nder EVF/LCD

26

Aperture-Priority AE (A)

To adjust aperture manually while letting the camera select shut-

ter speed for optimal exposure, rotate the shutter speed dial to A

and use the lens aperture ring. A will appear in the display.

Q If the correct exposure can not be achieved at the selected aper-

ture, the shutter speed will be displayed in red when the shutter but-

ton is pressed halfway. Adjust aperture until the correct exposure is

achieved.

Q If the subject is outside the metering range of the camera, the shutter

speed display will show “– – –”.

Q The slowest shutter speed available when ON is selected for

U POWER SAVE MODE is 

/

 s (P 81).

16 11 8 5.6 4 2.8

A

200

F5.62000

A

2000 F5 .6 200

Optical view nder EVF/LCD

Depth of Field

The aperture ring can be used to adjust aperture before recording begins. Choose

a low f-numbers to soften background details. The e ect can be heightened by

increasing the distance between your subject and the background.

16 11 8 5.6 4 2.8

A

Previewing Depth of Field

When L PREVIEW DEPTH OF FIELD is selected for F Fn BUTTON (P 50) in the

shooting menu, pressing the Fn button stops aperture down to the selected setting,

allowing depth of  eld to be previewed in the electronic view nder or LCD monitor.

27

Taking Photographs

Manual Exposure (M)

Exposure can be altered from the value suggested by the cam-

era by rotating both the shutter speed dial and aperture ring to

settings other than A (if A is currently selected for shutter speed,

press the dial release while rotating the shutter speed dial). M

will appear in the display.

16 11 8 5.6 4 2.8

A

200

M

F5.62000

M

2000 F5 .6 200

Optical view nder EVF/LCD

R The manual exposure display includes an exposure indicator that

shows the amount the picture would be under- or over-exposed at

current settings.

M

2000 F5 .6 200

28

Long Time-Exposures (T/B)

Select a shutter speed of T (time) or B (bulb) for long time-exposures.

R Use of a tripod is recommended to prevent the camera from moving during the exposure.

R To reduce “noise” (mottling) in long time-exposures, select ON for K LONG EXPOSURE NR in the shooting

menu. Note that this may increase the time needed to record images after shooting.

Time (T)

1

Rotate the shutter speed dial to T.

2

Press the selector left or right to

choose a shutter speed between 2 s

and 30 s in steps of 

/

 EV.

S

200

2”

F5. 6

3

Press the shutter button all the way

down to take a picture at the select-

ed shutter speed.

Bulb (B)

1

Rotate the shutter speed dial to B.

2

Press the shutter button all the way

down. The shutter will remain open

for up to 60 minutes while the shut-

ter button is pressed.

R Selecting an aperture of A  xes shutter speed at 30 s.

Using a Remote Release

A remote release (available from third-party suppli-

ers) can be used for long time-exposures.

29

Taking Photographs

Exposure Compensation

Rotate the exposure compensation dial to adjust exposure when photographing very bright,

very dark, or high-contrast subjects. The e ect is visible in the LCD monitor and electronic

view nder; when using the optical view nder, use the exposure indicator to check exposure.

Exposure compensation indicator

F5.6

200

2000

P

2000 F5.6 200

2000

1F5.6

000100

P

200

F

OVF EVF LCD

Choose positive values (+) to

increase exposure

Choose negative values (–) to

reduce exposure

Choosing an Exposure Compensation Value

• Backlit subjects: Choose values

from +

/

 EV to +1

/

 EV (for an

explanation of the term “EV”,

see the Glossary on page 109).

• Highly re ective subjects or very

bright scenes (e.g., snow elds): +1 EV

• Scenes that are mostly sky: +1 EV

• Spotlit subjects (particularly if photographed against dark back-

grounds): –

/

 EV

• Subjects with low re ectivity (pine trees or dark-colored foliage):

–

/

 EV

30

Focusing and Taking Pictures

Press the shutter button halfway to focus and the rest of the way down to shoot.

1

Focus.

Frame the picture with your subject in the center focus area and press the shutter button

halfway to focus.

R If the subject is poorly lit, the AF-assist illuminator may light (P 72).

If the camera is able to focus, it will beep twice and focus area will glow green. Focus and exposure will

lock while the shutter button is pressed halfway.

If the camera is unable to focus, the focus frame will turn red, and s will be displayed.

2

Shoot.

Smoothly press the shutter button the rest of the way down to take the picture.

Silent Mode

In situations in which camera sounds or lights may be unwelcome, press the

DISP/BACK button for a second, or select ON for

o SILENT MODE in the setup

menu (P 80; note that silent mode is not available during movie playback). The

camera speaker,  ash, and AF-assist illuminator/self-timer lamp turn o and

 ash and volume settings can not be adjusted.

31

More on Photography

F

Macro Mode (Close-ups)

To focus at short distances, press the selector up (MACRO) and select F. If the optical

view nder is on, the camera will automatically switch to the electronic view nder

(because of parallax, the optical view nder is not recommended). To exit macro

mode, press the selector up left and select OFF.

OFF

P

R The LCD monitor and electronic view nder can be used to focus at short ranges when macro mode is not

selected, but the time needed to focus increases.

R The shadow cast by the lens may appear in photographs taken with the  ash at distances under 50 cm/19.6 in.

Turn the  ash o or increase the distance to the subject.

32

White Balance

For natural colors, select D WHITE BALANCE in the shooting menu to display the

following options, then use the selector to highlight an option that matches the

light source and press MENU/OK. The dialog shown at bottom right will be displayed;

use the selector to  ne-tune white balance or press DISP/BACK to exit without  ne-

tuning (for an explanation of “white balance,” see the Glossary on page 109).

WHITE BALANCE

AUTO

SHIFTSET

WB SHIFT

SET

Option

Description

AUTO

AUTO White balance adjusted automatically.

h

h Measure a value for white balance (P 33).

k

Selecting this option displays a list of color

temperatures (P 33); highlight a tempera-

ture and press MENU/OK to select the high-

lighted option and display the  ne-tuning

dialog.

i

For subjects in direct sunlight.

Option

Description

j

For subjects in the shade.

k

Use under “daylight”  uorescent lights.

l

Use under “warm white”  uorescent lights.

m

Use under “cool white”  uorescent lights.

n

Use under incandescent lighting.

g

Reduces the blue cast typically associated

with underwater lighting.

R White balance is adjusted for  ash lighting only in AUTO and g modes. Turn the  ash o using other white

balance options.

R Results vary with shooting conditions. Play pictures back after shooting to check colors.

R White balance can also be adjusted using the Q button.

33

More on Photography

White Balance

h

: Custom White Balance

Choose h to adjust white balance for unusual lighting conditions. White balance measurement options will

be displayed; frame a white object so that it  lls the display and press the shutter button all the way down to

measure white balance (to select the most recent custom value and exit without measuring white balance,

press DISP/BACK, or press MENU/OK to select the most recent value and display the  ne-tuning dialog).

• If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.

• If “UNDER” is displayed, raise exposure compensation (

P 29) and try again.

• If “OVER” is displayed, lower exposure compensation and try again.

k

: Color Temperature

Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K). Light sources

with a color temperature close to that of direct sunlight appear white; light sources with a lower color tempera-

ture have a yellow or red cast, while those with a higher color temperature are tinged with blue. You can match

color temperature to the light source as shown in the following table, or choose options that di er sharply from

the color of the light source to make pictures “warmer” or “colder.”

Choose for redder light sources

or “colder” pictures

Choose for bluer light sources

or “warmer” pictures

2,000 K

Candlelight

5,000 K

Direct sunlight

15,000 K

Blue sky

Sunset/sunrise Shade

34

1

Press the DRIVE button to display

drive options.

CONTINUOUS

6

fps

3

fps

2

Press the selector up or down to

choose from frame rates of approxi-

mately 6 fps (frames per second)

and 3 fps, and press left or right

to choose the number of shots per

burst.

3

Press the shutter button halfway to

focus.

4

Press the shutter button the rest

of the way down to start shoot-

ing. Shooting ends when the shut-

ter button is released, the selected

number of pictures has been taken,

or memory is full.

R Focus and exposure are determined by the  rst

frame in each series. The  ash turns o automati-

cally; the previously-selected  ash mode is restored

when burst shooting is turned o .

R Frame rate varies with shutter speed and may slow

as more shots are taken.

R Additional time may be required to record pictures

when shooting ends.

R If  le numbering reaches 999 before shooting is

complete, the remaining pictures will be recorded

to a new folder (P 81).

I

Continuous Shooting (Burst Mode)

Capture motion in a series of pictures.

35

More on Photography

Bracketing

Automatically vary settings over a series of pictures.

1

Press the DRIVE button to display drive options and press the selector up or down

to highlight one of the following:

Option

Description

AE BKT

Press the selector left or right to highlight a bracketing amount. Each time the shutter

button is pressed, the camera will take three shots at up to about 6 fps: one using the

metered value for exposure, the second overexposed by the selected amount, and the

third underexposed by the same amount (regardless of the amount selected, exposure

will not exceed the limits of the exposure metering system).

ISO BKT

Press the selector left or right to highlight a bracketing amount. Each time the shutter

is released, the camera will take a picture at the current sensitivity (P 48) and process it

to create two additional copies, one with sensitivity raised and the other with sensitivity

lowered by the selected amount (regardless of the amount selected, sensitivity will not

exceed ISO 6400 or fall below ISO 200).

FILM

SIMULATION

BKT

Each time the shutter is released, the camera takes one shot and processes it to create

copies with the  lm simulation settings selected for X FILM SIMULATION BKT in the

shooting menu (P 68).

DYNAMIC

RANGE BKT

Each time the shutter button is pressed, the camera takes three shots with di erent

dynamic ranges (P 68): 100% for the  rst, 200% for the second, and 400% for the third.

The shots are taken at rates of up to about 6 fps. While dynamic range bracketing is in

e ect, sensitivity will be restricted to a minimum of ISO 800; the sensitivity previously in

e ect is restored when bracketing ends.

AE BKT

±

1

±

2

/

3

±

1

/

3

Press MENU/OK to select the highlighted option.

2

Take photographs.

36

Multiple Exposures

Create a photograph that combines two exposures.

1

Select ON for n MULTIPLE EXPOSURE in

the shooting menu.

2

Take the  rst shot.

3

Press MENU/OK. You will be prompt-

ed to take the second shot.

R To return to Step 2 and retake the  rst shot, press

the selector left. To save the  rst shot and exit

without creating a multiple exposure, press DISP/

BACK.

4

Take the second shot.

5

Press MENU/OK to create the multiple

exposure, or press the selector left

to return to Step 4 and retake the

second shot.

37

More on Photography

1

Press the DRIVE button to display

drive options. Press the selector up

or down to highlight r (MOTION

PANORAMA) and press MENU/OK.

MOTION PANORAMA

2

To select the size of the angle

through which you will pan the

camera while shooting, press the se-

lector left. Highlight a size and press MENU/OK.

3

Press the selector right to view a

choice of pan directions. Highlight

a pan direction and press MENU/OK.

4

Press the shutter button all the way down to

start recording. There is no need to keep the

shutter button pressed during recording.

5

Pan the camera in the direction shown by the

arrow. Shooting ends automatically when the

camera is panned to the end of the guides

and the panorama is complete.

ANGLE DIRECTION

R Shooting ends if the shutter button is pressed all

the way down during shooting. No panorama

may be recorded if the shutter button is pressed

before the panorama is complete.

The size of the completed panorama varies with

the angle and pan direction.

Angle

Pan direction

Size (W × H)

P

Horizontal

5,120 × 1,440/ 7.3 M

Vertical

2,160 × 5,120/11.1 M

O

Horizontal

7,680 × 1,440/11.1 M

Vertical

2,160 × 7,680/16.6 M

Panoramas

Follow an on-screen guide to create a panorama.

38

Panoramas

Q Panoramas are created from multiple frames; expo-

sure for the entire panorama is determined by the

 rst frame. The camera may in some cases record an

greater or lesser angle than selected or be unable to

stitch the frames together perfectly. The last part of

the panorama may not be recorded if shooting ends

before the panorama is complete.

Q Shooting may be interrupted if the camera is panned

too quickly or too slowly. Panning the camera in a

direction other than that shown cancels shooting.

Q The desired results may not be achieved with mov-

ing subjects, subjects close to the camera, unvary-

ing subjects such as the sky or a  eld of grass, sub-

jects that are in constant motion, such as waves and

waterfalls, or subjects that undergo marked chang-

es in brightness. Panoramas may be blurred if the

subject is poorly lit.

For Best Results

For best results, use a lens with a focal length of

35 mm or less (50 mm or less in 35 mm format). Prop

your elbows against your sides and move the camera

slowly in a small circle at a steady speed, keeping the

camera horizontal and being careful only to pan in

the direction shown by the guides. Use a tripod for

best results. If the desired results are not achieved, try

panning at a di erent speed.

39

More on Photography

F

Recording High-De nition (HD) Movies

Record short high-de nition movies. Sound is recorded in stereo via the built-in microphone; during

recording, do not cover the microphone or use the view nder selector, which is located next to the

microphone.

1

Press the DRIVE button to display

drive options. Press the selector up

or down to highlight F (MOVIE)

and press MENU/OK.

MOVIE

Q If the optical view nder is on, the camera will au-

tomatically switch to the electronic view nder.

2

Press the shutter button all the way

down to start recording.

3

Press the shutter button all the way

down again to end recording. Re-

cording ends automatically after ten

minutes or when memory is full.

R Focus, exposure, and white balance are adjusted

automatically throughout recording. The color and

brightness of the image may vary from those dis-

played before recording begins.

R The indicator lamp lights while movies are being

recorded.

Q The microphone may pick up lens noise and other

sounds made by the camera during recording.

Q Vertical or horizontal streaks may appear in movies

containing very bright subjects. This is normal and

does not indicate a malfunction.

40

F Recording High-De nition (HD) Movies

Before Recording

Before recording, choose a frame size of i 1920 (1,920 × 1,080, or Full HD) or h 1280 (1,280 × 720,

or HD) using the W MOVIE MODE option in the shooting menu (P 73), adjust aperture (P 26), white

balance (P 32),  lm simulation (P 51), and exposure compensation (P 29), and select a focus mode

(P 45).

R To increase zoom by 3 × for a focal length equivalent to 105 mm (35 mm format), press the k button before

recording begins. Press n to cancel zoom.

Q Continuous AF is used when S is selected for focus mode.

41

More on Photography

h

Using the Self-Timer

Use the timer for self-portraits or to prevent blur caused by camera shake.

1

Press MENU/OK in shooting mode to display the shooting menu. Press

the selector up or down to highlight B SELF-TIMER and press MENU/

OK.

SHOOTING MENU

F

3

:

2

200

OFF

EXIT

P

IMAGE SIZE

IMAGE QUALITY

DYNAMIC RANGE

ISO

FILM SIMULATION

FILM SIMULATION BKT

SELF-TIMER

2

Press the selector up or down to highlight one of the following op-

tions and press MENU/OK to select.

Option

Description

R

2 SEC

The shutter is released two seconds after the shutter button is pressed. Use

to reduce blur caused by the camera moving when the shutter button is

pressed.

S

10 SEC

The shutter is released ten seconds after the shutter button is pressed. Use

for photographs in which you wish to appear yourself.

OFF

OFF Self-timer o .

SHOOTING MENU

F

3

:

2

200

SELF-TIMER

OFF

P

3

:

2

200

F

OFF

2

SEC

10

SEC

3

Press the shutter button halfway to focus.

Q Stand behind the camera when using the shutter button. Standing in

front of the lens can interfere with focus and exposure.

42

h Using the Self-Timer

4

Press the shutter button the rest of the way down to start the timer.

The display in the monitor shows the number of seconds remaining

until the shutter is released. To stop the timer before the picture is

taken, press DISP/BACK.

9

The self-timer lamp on the front of the camera will blink immediately

before the picture is taken. If the two-second timer is selected, the

self-timer lamp will blink as the timer counts down.

R The self-timer turns o automatically when the camera is turned o .

43

More on Photography

Focus/Exposure Lock

To compose photographs with o -center subjects:

1

Focus: Position the subject in the focus frame and press the shutter button half-

way to lock focus and exposure. Focus and exposure will remain locked while

the shutter button is pressed halfway (AF/AE lock).

P

2000 F5. 6 200

R Depending on the option selected for v AE/AF-LOCK BUTTON in the shooting menu (P 72), focus and/

or exposure can also be locked by pressing the AFL/AEL button; focus and/or exposure will remain locked

even if the shutter button is pressed. Choose AE LOCK ONLY to lock exposure but not focus, AF LOCK

ONLY to lock focus but not exposure, or AE/AF LOCK to lock both focus and exposure. In manual focus

mode (P 45), the camera will focus automatically with the AFL/AEL button.

2

Recompose: Keep the shutter button pressed halfway or keep the AFL/AEL button

pressed.

R If AE&AF ON/OFF SWITCH is selected for k AE/AF-LOCK MODE (P 72), focus and/or

exposure lock when the AFL/AEL button is pressed and remain locked until the button

is pressed again.

F5.62000

P

200

3

Shoot: Press the button all the way down.

F5.62000

P

200

44

Focus/Exposure Lock

Autofocus

Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed

below.

• Very shiny subjects such as mirrors or car bodies.

• Fast-moving subjects.

• Subjects photographed through a window or other re ective object.

• Dark subjects and subjects that absorb rather than re ect light, such as hair or fur.

• Insubstantial subjects, such as smoke or  ame.

• Subjects that show little contrast with the background (for example, subjects in clothing that is the same color

as the background).

• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a

subject photographed against a backdrop of highly contrasting elements).

45

More on Photography

Focus Mode

Use the focus mode selector to choose how the camera focuses.

• S (single AF): Focus locks while the shutter button is pressed halfway.

Choose for stationary subjects.

• C (continuous AF): Focus is continually adjusted to re ect changes in the

distance to the subject even when the shutter button is not pressed

halfway (note that this increases the drain on the battery).

• M (manual): Focus manually using the focus ring. Rotate the ring left to reduce the focus distance,

right to increase. The manual focus indicator indicates how closely the focus distance matches the

distance to the subject in the focus brackets (the red bar indicates the focus distance, the white bar

the depth of  eld, or in other words the distance in front of and behind the focus point that ap-

pears to be in focus); you can also check focus visually in the electronic view nder or LCD monitor.

Choose for manual control of focus or in situations in which the camera is unable to focus using

autofocus (P 44).

16 11 8 5.6 4 2.8

A

Reduce focus

distance

Increase focus

distance

0.1 0.5 1.0 1.5 2.0 3.0 5.0 10

M

2000 F5 .6 200

Manual focus

mode icon

Manual focus

indicator

Focus distance

(red bar)

1.0 1.5 2.0 3.0

Depth of  eld

(white bar)

R Use the I FOCUS RING option in the setup menu (P 81) to reverse the direction of rotation of the focus ring.

R The camera will not focus if the focus ring is rotated past in nity.

R To focus using autofocus, press the AFL/AEL button. This can be used to quickly focus on a chosen subject in

manual focus mode.

R The camera can show focus distance in meters or feet. Use the M FOCUS SCALE UNITS option in the setup

menu (P 83) to choose the units used.

46

Focus Mode

Manual Focus

Pressing the center of the command dial magni es the view in the electronic

view nder or LCD monitor for precise focus. To scroll to other areas of the

frame, press the AF button and use the selector.

0.1 0.5 1.0 1.5 2.0 3.0 5.0 10

M

2000 F5 .6

200

0.1 0.5 1.0 1.5 2.0 3.0 5.0 10

M

2000 F5 .6

200

0.1 0.5 1.0 1.5 2.0 3.0 5.0 10

M

2000 F5 .6

200

47

More on Photography

Focus Frame Selection

When t AREA is selected for

F

F AF MODE in the shooting

menu and S is selected for focus mode, the electronic view nder

and LCD monitor o er a choice of 49 focus points and the opti-

cal view nder a choice of 25, allowing photographs to be com-

posed with the main subject positioned almost anywhere in the

frame. To position the focus frame, press the AF button and use

the selector (the focus frame can be returned to the center by

pressing MENU/OK). Press the AF button again to put the setting

into e ect.

Q When you switch to the optical view nder, the camera will select the

focus frame closest to that selected in the electronic view nder or

LCD monitor.

Focus frame

Focus point

OVF EVF/LCD

When framing pictures in the electronic view nder or LCD moni-

tor, you can choose the size of the focus frame for S by pressing

the AF button and rotating the command dial left or right. Rotate

the dial left to reduce the frame by up to 50%, right to enlarge it

by up to 150%, or press the center of the dial to restore the frame

to its original size. Press the AF button again to put the setting

into e ect.

EVF/LCD

48

Sensitivity

“Sensitivity” refers to the camera’s sensitivity to light. Choose from values between L (100) (ISO 100)

and H (25600) (ISO 25600). Higher values can be used to reduce blur when lighting is poor, while low-

er values allow slower shutter speeds or wider apertures in bright light; note, however, that mottling

may appear in pictures taken at high sensitivities, particularly at H (25600), while choosing L (100)

reduces dynamic range. Values of from ISO 200 to ISO 6400 are recommended in most situations. If

an AUTO option is selected, the camera will adjust sensitivity automatically in response to shooting

conditions; the value in parentheses is the maximum sensitivity that will be selected when the subject

is poorly lit.

1

Press MENU/OK in shooting mode to display the shooting menu. Press

the selector up or down to highlight N ISO and press MENU/OK.

R At default settings, ISO options can also be displayed by pressing the Fn

button.

SHOOTING MENU

F

3

:

2

200

OFF

EXIT

P

IMAGE SIZE

IMAGE QUALITY

DYNAMIC RANGE

ISO

FILM SIMULATION

FILM SIMULATION BKT

SELF-TIMER

2

Press the selector up or down to highlight the desired option and

press MENU/OK to select.

P

2000 F5 .6 200

SHOOTING MENU

F

3

:

2

ISO

200

OFF

P

OFF

F

320

400

500

250

L

(

100

)

AUTO

(

400

)

200

R Sensitivity is not reset when the camera is turned o .

R L (100) is reset to ISO 200 and H (12800) and H (25600) are reset to ISO 6400 when RAW, FINE+RAW, or

NORMAL+RAW is selected for image quality (P 53, 67). For more information on the settings available with

L (100), H (12800), and H (25600), see page 116.

49

More on Photography

Metering

To choose how the camera meters exposure, press the AE button

to display metering options. Use the selector to highlight an op-

tion and press AE to select.

Mode

Description

o

(MULTI)

The camera instantly determines exposure based on an analysis of

composition, color, and brightness distribution. Recommended in

most situations.

p

(SPOT)

The camera meters lighting conditions in an area at the center of

the frame equivalent to 2% of the total. Recommended when the

background is much brighter or darker than the main subject; due to

parallax, not recommended when pictures are framed in the optical

view nder.

q

(AVERAGE)

Exposure is set to the average for the entire frame. Provides consistent

exposure across multiple shots with the same lighting, and is particu-

larly e ective for landscapes and portraits of subjects dressed in black

or white.

PHOTOMETRY

MULTI

OVF EVF/LCD

50

The Fn Button

The role played by the Fn button can be selected using the F Fn

BUTTON option in the shooting menu (P 70). The options available

include multiple exposure (P 36), depth-of- eld preview (P 26), the

self-timer (P 41), sensitivity (P 48), image size (P 67), image quality

(P 67), dynamic range (P 68),  lm simulation (P 51), white balance

(P 32), AF mode (P 69), movie recording (P 39), RAW/JPEG toggle (P 53), and custom settings (P 52).

R The F Fn BUTTON menu can also be displayed by pressing and holding the Fn button.

51

More on Photography

Film Simulation

Simulate the e ects of di erent kinds of  lm, including black-and-white (with or without color  lters).

1

Press MENU/OK in shooting mode to display the shooting menu. Press

the selector up or down to highlight P FILM SIMULATION and

press MENU/OK.

SHOOTING MENU

F

3

:

2

200

OFF

EXIT

P

IMAGE SIZE

IMAGE QUALITY

DYNAMIC RANGE

ISO

FILM SIMULATION

FILM SIMULATION BKT

SELF-TIMER

2

Press the selector up or down to highlight one of the following options and press MENU/OK to select.

Option

Description

c

(PROVIA/STANDARD)

Standard color reproduction. Suited to a wide range of subjects, from portraits to landscapes.

>

(Velvia/VIVD)

A high-contrast palette of saturated colors, suited to nature photos.

e

(ASTIA/SOFT)

Enhances the range of hues available for skin tones in portraits while preserving the bright blues

of daylight skies. Recommended for outdoor portrait photography.

g

(PRO Neg. Hi)

O ers slightly more contrast than h (PRO Neg. Std). Recommended for outdoor portrait pho-

tography.

h

(PRO Neg. Std)

A soft-toned palette. The range of hues available for skin tones is enhanced, making this a good

choice for studio portrait photography.

;

(MONOCHROME)

Take pictures in standard black and white.

e

(MONOCHROME + Ye FILTER)

Take black-and-white pictures with slightly increased contrast. This setting also slightly tones

down the brightness of the sky.

d

(MONOCHROME + R FILTER)

Take black-and-white pictures with increased contrast. This setting also tones down the bright-

ness of the sky.

f

(MONOCHROME + G FILTER)

Soften skin tones in black-and-white portraits

f

(SEPIA)

Take pictures in sepia.

R Film simulation options can be combined with tone and sharpness settings (P 69).

52

Saving Settings

Save up to three sets of custom camera settings for commonly-encountered situations. Saved settings

can be recalled using the u SELECT CUSTOM SETTING option in the shooting menu.

1

Press MENU/OK in shooting mode to display the shooting menu. Press

the selector up or down to highlight K EDIT/SAVE CUSTOM SET-

TING and press MENU/OK.

SHOOTING MENU

OFF

EXIT

P

EDIT/SAVE CUSTOM SETTING

OFF

35

mm

SELECT CUSTOM SETTING

CORRECTED AF FRAME

AF MODE

SHOOT WITHOUT LENS

Fn BUTTON

FOCAL LENGTH SETTING

2

Highlight a custom settings bank and press MENU/OK to select. Adjust

the following as desired and press DISP/BACK when adjustments are com-

plete: N ISO, U DYNAMIC RANGE, P FILM SIMULATION, D WHITE

BALANCE, f COLOR, q SHARPNESS, r HIGHLIGHT TONE,

s SHADOW TONE, and h NOISE REDUCTION.

CUSTOM

1

200

AUTO

0

FILM SIMULATION

WHITE BALANCE

ISO

DYNAMIC RANGE

COLOR

SAVE CURRENT SETTINGS

EXIT

R To replace the settings in the selected bank with the settings currently selected with the camera, select

K SAVE CURRENT SETTINGS and press MENU/OK.

3

A con rmation dialog will be displayed; highlight OK and press MENU/

OK.

OK

SAVE CUSTOM SETTING

CUSTOM

1

SET OK?

OK

CANCEL

53

More on Photography

Recording Pictures in RAW Format

To toggle RAW image quality on or o for a single shot, assign RAW

to the Fn button (P 50). If a JPEG option is currently selected for im-

age quality, pressing the Fn button temporarily selects the equivalent

JPEG+RAW option. If a JPEG+RAW option is currently selected, pressing

the Fn button temporarily selects the equivalent JPEG option, while if

RAW is selected, pressing the Fn button temporarily selects FINE. Taking a picture or pressing the Fn

button again restores the previous setting.

R RAW images record raw, unprocessed data from the camera image sensor. JPEG copies of RAW images can

be created using the j RAW CONVERSION option in the playback menu, or RAW images can be viewed on

a computer using the RAW File Converter application that is installed with the software on the supplied CD

(P 90, 92).

R Sensitivities of L (100), H (12800), and H (25600) are not available when RAW image quality is on (P 48).

R Control lock (P 4) disables the RAW button. To enable the RAW button, press MENU/OK until the X icon clears

from the display.

54

N

Flash Photography

Optional EF-42, EF-20, and EF-X20 shoe-mounted  ash units (P 97) can be used for additional lighting

when shooting at night or indoors under low light. See the manual provided with the  ash unit for

details.

To choose the  ash mode for the optional  ash unit, select I FLASH MODE in the

shooting menu. The options shown below will be displayed; press the selector up

or down to highlight an option and press MENU/OK to select.

Mode

Description

AUTO

(AUTO FLASH)

/

K

(RED EYE REDUCTION)

*

The  ash  res when required. Recommended in most situations.

N

(FORCED FLASH)

/

L

(FORCED FLASH)

*

The  ash  res whenever a picture is taken. Use for backlit subjects or for natural

coloration when shooting in bright light.

P

(SUPPRESSED FLASH)

The  ash does not  re even when the subject is poorly lit. Use of a tripod is rec-

ommended.

l

(2ND CURTAIN SYNC.)

/

d

(2ND CURTAIN SYNC.)

*

The  ash  res immediately before the shutter closes.

O

(SLOW SYNCHRO)

/

M

(RED-EYE & SLOW)

*

Capture both the main subject and the background under low light (note that

brightly lit scenes may be overexposed).

SHOOTING MENU

OFF

±

0

P

OFF

±

0

OFF

FLASH MODE

AUTO

FORCED FLASH

SLOW SYNCHRO

2

ND CURTAIN SYNC.

SUPPRESSED FLASH

* Red-eye removal (K, L, M, or d) is available in these modes when ON is selected for

B RED EYE REMOVAL in the shooting menu (P 73). Red-eye removal minimizes “red-eye”

caused when light from the  ash is re ected from the subject’s retinas as shown in the il-

lustration at right.

R If p is displayed when the shutter button is pressed halfway, the  ash will  re when the photo is taken.

R The  ash may  re several times with each shot. Do not move the camera until shooting is complete.

R Remove lens hoods to prevent shadows in photos taken with the  ash.

Q The  ash does not  re in silent mode.

55

More on Photography

Flash Photography

Flash Sync Speed

The  ash will synchronize with the shutter at shutter speeds of 

/

 s or slower.

The Sync Terminal

Use the sync terminal to connect  ash units that require a sync cable.

Third-Party Flash Units

Do not use third-party  ash units that apply over 300 V to the camera hot shoe.

56

Viewing Pictures

Viewing Pictures Full Frame

Pictures can be viewed in the electronic view nder or LCD monitor. When taking important pictures,

take a test shot and check the results.

To view pictures full frame, press a.

100-0001

1 /1000 F4 .5

2

-

1

3

200

Additional pictures can be viewed by

pressing the selector left or right or ro-

tating the command dial. Press the se-

lector or rotate the dial right to view pictures in

the order recorded, left to view pictures in reverse

order. Keep the selector pressed to scroll rapidly

to the desired frame.

R Pictures taken using other cameras are indicated by

a m (“gift image”) icon during playback.

Favorites: Rating Pictures

To rate the current picture, press DISP/BACK and press

the selector up and down to select from zero to  ve

stars.

Deleting Pictures

To delete the current picture, press the

b button.

The following dialog will be displayed.

ERASE OK?

OK

CANCEL

SET

To delete the picture, highlight OK and

press MENU/OK. To exit without deleting

the picture, highlight CANCEL and press

MENU/OK.

R Pictures can also be deleted from the playback

menu (P 65).

Creating JPEG Copies of RAW Pictures

Pressing the RAW button during playback displays

RAW conversion options (P 53).

57

Viewing Pictures

Viewing Pictures Full Frame

Viewing Photo Information

The photo information display changes

each time the selector is pressed up.

100-0001

12 /31 /2050

1 /1000 F4. 5

10 : 00

AM

10 : 00

AM

2

-

1

3

3:2

F

200

D-RANGE

COLOR

HIGH LIGHT TONE

SHADOW TONE

SHARPNESS

FILM SIM.

WHITE BALANCE

:

100

: STD

: PROVIA

: AUTO

Basic data Details, page 1

LENS

FOCAL LENGTH

:

18

mm

METERING

: PATTERN

COLOR SPACE

: sRGB

F

2.0

:

18

mm

: OFF

FLASH MODE

: PROGRAMEXPOSURE MODE

Active focus point (“+”) Details, page 2

R Rotate the command dial to view other images.

Zooming in on the Focus Point

Press the center of the command

control to zoom in on the focus

point. Press the center of the com-

mand control again to return to

full-frame playback.

Playback Zoom

Press k to zoom in on the current picture, n to

zoom out. When the picture is zoomed in, the

selector can be used to view areas of the image

not currently visible in the display. Press DISP/BACK

or MENU/OK to exit zoom.

Zoom indicator

Navigation window shows

portion of image currently

displayed

R The maximum zoom ratio varies with image size

(P 67). Playback zoom is not available with cropped

or resized copies saved at a size of a.

58

Viewing Pictures Full Frame

Multi-Frame Playback

To change the number of images displayed, press n when a picture is displayed full frame.

Press n to view

more images.

100-0001

Press k to view

fewer images.

Use the selector to highlight images and press MENU/OK to view the highlighted image full frame. In

the nine- and hundred-frame displays, press the selector up or down to view more pictures.

59

Viewing Pictures

Viewing Movies

During playback, movies are displayed as shown at right. The following operations

can be performed while a movie is displayed:

Operation

Description

Start/pause playback

Press the selector down to start playback. Press again to pause. While playback is

paused, you can press the selector left or right to rewind or advance one frame

at a time.

End playback

End playback Press the selector up to end playback.

Adjust speed

Press the selector left or right to adjust playback speed during playback. Speed is

shown by the number of arrows (M or N).

Adjust volume

Press MENU/OK to pause playback and display volume controls. Press the selector

up or down to adjust the volume; press MENU/OK again to resume playback. Vol-

ume can also be adjusted in the playback menu (P 78).

Movie icon

100-006

PLAY

Progress is shown in the display during playback.

Q Do not cover the speaker during playback.

Q Sound is not played back in silent mode.

Progress bar

15

s

15

s

STOP PAUSE

60

Image Search

Follow the steps below to search for pictures.

1

Press MENU/OK during playback to display the playback menu. Press the selector up or down to

highlight b IMAGE SEARCH and press MENU/OK.

2

Highlight an option and press MENU/OK.

Option

Description

BY DATE Search by date.

BY FACE Search for pictures that include faces.

BY I FAVORITES

Search by rating.

BY TYPE OF DATA Find all still pictures, all movies, all pictures taken in burst mode, or all RAW pictures.

BY UPLOAD MARK Find all pictures selected for upload to a speci ed destination.

3

Select a search condition. Only pictures that match the search condition

will be displayed. To delete or protect selected pictures or to view the se-

lected pictures in a slide show, press MENU/OK and choose from the options

at right.

4

To end the search, select EXIT SEARCH.

Option

See page

A

ERASE

65

D

PROTECT

75

I

SLIDE SHOW

76

61

Viewing Pictures

m

PhotoBook Assist

Create books from your favorite photos.

Creating a PhotoBook

1

Select NEW BOOK for m PHOTOBOOK AS-

SIST in the playback menu (P 77) and choose

from the following options:

• SELECT FROM ALL: Choose from all available

pictures.

• SELECT BY IMAGE SEARCH: Choose from pictures

matching selected search conditions (P

60).

R Neither photographs a or smaller nor movies

can be selected for photobooks.

2

Scroll through the images and press the se-

lector up to select or deselect. To display the

current image on the cover, press the selector

down. Press MENU/OK to exit when the book is

complete.

R The  rst picture selected becomes the cover im-

age. Press the selector down to select a di erent

image for the cover.

3

Select COMPLETE PHOTOBOOK (to select all

photos or all photos matching the speci ed

search conditions for the book, choose SE-

LECT ALL). The new book will be added to

the list in the photobook assist menu.

Q Books can contain up to 300 pictures.

Q Books that contain no photos are automatically de-

leted.

62

m PhotoBook Assist

Viewing Photobooks

Highlight a book in the photobook assist menu

and press MENU/OK to display the book, then press

the selector left or right to scroll through the pic-

tures.

Editing and Deleting Photobooks

Display the photobook and press MENU/OK. The

following options will be displayed; select the

desired option and follow the on-screen instruc-

tions.

• EDIT: Edit the book as described in “Creating a

PhotoBook” (P 61).

• ERASE: Delete the book.

Photobooks

Photobooks can be copied to a computer using the supplied MyFinePix Studio software (P 90).

63

Viewing Pictures

Viewing Panoramas

If you press the selector down when a panorama is dis-

played full frame, the camera will play back the picture from

left to right or from bottom to top. Press the selector down

to pause and resume playback, or press the dial up to return

to full-frame playback. To rewind or advance one frame at a

time, press the selector left or right while playback is paused.

PLAY

STOP PAUSE

64

Viewing Pictures Taken in a Single Burst

When a picture taken in continuous shooting mode is dis-

played full frame, the  rst picture in the current burst can

be viewed by pressing the selector down (burst mode play-

back). Press the dial right to view pictures in the order re-

corded, left to view pictures in reverse order. Keep the dial

pressed to scroll rapidly to the desired frame. To exit, press

DISP/BACK.

Position in burst/total number

of pictures in burst

PLAY CONTINUOUS SHOTS

PLAY NORMAL

1/10

First picture in burst

R Pressing the selector right when the last picture in the burst is displayed displays the  rst picture in the burst;

similarly, pressing the dial left when the  rst picture is displayed displays the last picture.

R Deletion (P 65), rotation (P 75), and protect (P 75) operations applied during burst mode playback apply

only to the current picture. In contrast, if these operations are performed when a picture taken in continuous

shooting mode is displayed in single-frame playback, all images in the same burst will be a ected.

Bursts That Cross Folders

If a single burst is spread across multiple folders, the pictures in each folder will be treated as separate bursts.

Viewing Photo Information

To view photo information for a picture taken in continuous shooting mode, display it in burst mode playback.

Photo information for pictures taken in continuous shooting mode can not be viewed during single-frame

playback.

65

Viewing Pictures

x

Deleting Pictures

The A ERASE option in the playback menu can be used to delete individual pictures, multiple select-

ed pictures, or all pictures. Note that deleted pictures can not be recovered. Copy important pictures to

a computer or other storage device before proceeding.

Press MENU/OK during playback to display the playback menu, then press the se-

lector up or down to highlight A ERASE and press right to display the following

options. Press the selector up or down to highlight an option and press MENU/OK

to select.

PLAYBACK MENU

ERASE

RED EYE REMOVAL

PROTECT

RESIZE

RAW CONVERSION

CROP

IMAGE ROTATE

FRAME

SELECTED FRAMES

ALL FRAMES

BACK

Option

Description

FRAME

Press the selector left or right through pictures and press MENU/OK to delete the current picture (a con rmation

dialog is not displayed)

SELECTED FRAMES

Highlight pictures and press MENU/OK to select or deselect (pictures that in a photobook or print order are

shown by S). When the operation is complete, press DISP/BACK to display a con rmation dialog, then high-

light OK and press MENU/OK.

ALL FRAMES

A con rmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures.

Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed can not be

recovered.

R Protected pictures can not be deleted. Remove protection from any pictures you wish to delete (P 75).

R If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete

the pictures.

66

Creating JPEG Copies of RAW Pictures

RAW pictures store information on camera settings separately from the data captured by the camera

image sensor. Using the j RAW CONVERSION option in the playback menu, you can create JPEG

copies of RAW pictures using di erent options for the settings listed below. The original image data

are una ected, allowing a single RAW image to be processed in a multitude of di erent ways.

1

Press MENU/OK during playback to display the

playback menu, then press the selector up

or down to highlight j RAW CONVERSION

and press MENU/OK to display the settings list-

ed in the table at right.

R If RAW is assigned to the Fn button (P 53), these

options can also be displayed by pressing Fn

during playback.

2

Press the selector up or

down to highlight a setting

and press the dial right to

select. Press the dial up or

down to highlight the de-

sired option and press MENU/OK to select and

return to the settings list. Repeat this step to

adjust additional settings.

3

Press the Q button to preview the JPEG copy

and press MENU/OK to save.

Setting

Description

REFLECT SHOOTING

COND.

Create a JPEG copy using the settings in ef-

fect at the time the photo was taken.

PUSH/PULL

PROCESSING

Adjust exposure by –1 EV to +3 EV in incre-

ments of 

/

 EV (P 29).

DYNAMIC RANGE

Enhance details in highlights for natural

contrast (

P 68).

FILM SIMULATION

Simulate the e ects of di erent types of  lm

(

P 51).

WHITE BALANCE Adjust white balance (

P 32).

WB SHIFT Fine-tune white balance (

P 32).

COLOR Adjust color density (

P 68).

SHARPNESS Sharpen or soften outlines (

P 69).

HIGHLIGHT TONE Adjust highlights (

P 69).

SHADOW TONE Adjust shadows (

P 69).

NOISE REDUCTION Process the copy to reduce mottling (

P 69).

COLOR SPACE

Choose the color space used for color repro-

duction (

P 83).

REFLECT SHOOTING COND.

RAW CONVERSION

PUSH/PULL PROCESSING

FILM SIMULATION

WHITE BALANCE

WB SHIFT

DYNAMIC RANGE

CREATE CANCEL

67

Menus

Using the Menus: Shooting Mode

The shooting menu is used to adjust settings for a wide range of shooting condi-

tions. To display the shooting menu, press MENU/OK in shooting mode. Highlight

items and press the selector right to view options, then highlight an option and

press MENU/OK. Press DISP/BACK to exit when settings are complete.

SHOOTING MENU

F

3

:

2

200

OFF

EXIT

P

IMAGE SIZE

IMAGE QUALITY

DYNAMIC RANGE

ISO

FILM SIMULATION

FILM SIMULATION BKT

SELF-TIMER

Shooting Menu Options

N

ISO

(

defaults to

200)

Control the camera’s sensitivity to light (P 48).

O

IMAGE SIZE

(

defaults to

O

3 : 2)

Choose the size and aspect ratio at which still pictures are recorded.

Aspect Ratio

Pictures with an aspect ratio of 3 : 2 have the same proportions as

a frame of 35 mm  lm, while an aspect ratio of 16 : 9 is suited to

display on

H

igh

D

e nition (HD) devices. Pictures with an aspect

ratio of 1 : 1 are square.

O IMAGE SIZE is not reset when the camera is turned o or an-

other shooting mode is selected.

Option

Prints at sizes up to

Option

Prints at sizes up to

O

3

:

2

41 × 28 cm (16 × 11 in.)

Q

3

:

2

21 × 14 cm (8 × 6 in.)

O

16

:

9

41 × 23 cm (16 × 9 in.)

Q

16

:

9

21 × 12 cm (8 × 5 in.)

O

1

:

1

28 × 28 cm (11 × 11 in.)

Q

1

:

1

14 × 14 cm (6 × 6 in.)

P

3

:

2

29 × 20 cm (12 × 8 in.)

P

16

:

9

29 × 16 cm (12 × 6 in.)

P

1

:

1

20 × 20 cm (8 × 8 in.)

T

IMAGE QUALITY

(

defaults to

FINE)

Choose a  le format and compression ratio. Select FINE or NORMAL to record JPEG images, RAW to record RAW images, or

FINE+RAW or NORMAL+RAW to record both JPEG and RAW images. FINE and FINE+RAW use lower JPEG compression ratios

for higher-quality JPEG images, while NORMAL and NORMAL+RAW user higher JPEG compression ratios to increase the num-

ber of images that can be stored.

68

Using the Menus: Shooting Mode

U

DYNAMIC RANGE

(

defaults to

A

)

Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to

reduce loss of detail in highlights and shadows when photographing high-contrast scenes. Higher values are recommended

for scenes that include both sunlight and deep shade, for such high-contrast subjects as sunlight on water, brightly-lit autumn

leaves, and portraits taken against a blue sky, and for white objects or people wearing white; note, however, that mottling may

appear in pictures taken at higher values.

R If AUTO is selected, shutter speed and aperture will be displayed when the shutter button is pressed halfway.

R

B

B 200% is available at sensitivities of ISO 400 and above,

C

C 400% at sensitivities of ISO 800 and above.

P

FILM SIMULATION

(

defaults to

<

)

Simulate the e ects of di erent types of  lm (P 51).

X

FILM SIMULATION BKT

Choose  lm types for  lm simulation bracketing (P 35).

B

SELF-TIMER

(

defaults to

OFF)

Take pictures with the self-timer (P 41).

D

WHITE BALANCE

(

defaults to

AUTO)

Adjust colors to match the light source (P 32).

f

COLOR

(

defaults to

MID)

Adjust color density.

69

Menus

Using the Menus: Shooting Mode

q

SHARPNESS

(

defaults to

STANDARD)

Sharpen or soften outlines.

r

HIGHLIGHT TONE

(

defaults to

STANDARD)

Adjust the appearance of highlights.

s

SHADOW TONE

(

defaults to

STANDARD)

Adjust the appearance of shadows.

h

NOISE REDUCTION

(

defaults to

STANDARD)

Reduce noise in pictures taken at high sensitivities.

K

LONG EXPOSURE NR

(

defaults to

ON)

Select ON to reduce mottling in long time-exposures (P 28).

u

SELECT CUSTOM SETTING

Recall settings saved with K EDIT/SAVE CUSTOM SETTING.

K

EDIT/SAVE CUSTOM SETTING

Save settings (P 52).

F

AF MODE

(

defaults to

t

AREA)

Choose how the camera selects the focus area when in focus mode S.

• s MULTI: When the shutter button is pressed halfway, the camera detects high-contrast subjects and selects the focus area

automatically.

• t AREA: Choose the focus area manually (P 47).

70

Using the Menus: Shooting Mode

G

CORRECTED AF FRAME

(

defaults to

OFF)

If ON is selected, a second focus frame for focus distances of about 80 cm (2.6 ft) will be added to the display in the optical view-

 nder. The focus frame for the current focus distance is displayed in green when the shutter button is pressed halfway.

ON

OFF

Focus frame

Focus frame for focus distance of in nity

F5.6

200

2000

P

F5.6

200

2000

P

Focus frame for focus distance of

about 80 cm (2.6 ft)

l

FOCAL LENGTH SETTING

(

defaults to

50 mm)

Enter lens focal length when using a lens that does not supply the focal length to the camera. Choose from LENS 1 (21 mm),

LENS 2 (24 mm), LENS 3 (28 mm), LENS 4 (35 mm), LENS 5 (50 mm), and LENS 6 (75 mm). The focal length for lenses 5 and 6

can be chosen by rotating the command dial; the focal lengths for the remaining options are  xed at the value given in brackets.

m

SHOOT WITHOUT LENS

(

defaults to

OFF)

Choose whether shutter release is enabled when no lens is attached.

F

Fn BUTTON

(

defaults to

N

ISO)

Choose the role played by the Fn button (P 50).

n

MULTIPLE EXPOSURE

(

defaults to

OFF)

Create a photograph that combines two exposures (

P 36).

71

Menus

Using the Menus: Shooting Mode

v

DISP. CUSTOM SETTING

Choose the items displayed in the optical view nder or in the electronic view nder and LCD monitor (P 21). The following items

can be displayed: framing grid (you can also select the grid type as described on page 71), virtual horizon, focus distance (auto or

manual), histogram, exposure (shutter speed, aperture, and sensitivity), exposure compensation/exposure indicator, metering,

 ash mode, white balance,  lm simulation, dynamic range, number of exposures remaining, image size and quality, and battery

level. See pages 6 – 8 for the locations of these items in the displays.

1

Highlight OVF or EVF/LCD and press MENU/OK.

2

Press the selector up or down to highlight items and press MENU/OK to select or deselect. Press DISP/BACK to exit when settings

are complete.

Virtual Horizon

Selecting

ELECTRONIC LEVEL

displays a virtual horizon. The camera is level when the two lines over-

lap.

R The virtual horizon may not be displayed if the camera lens is pointed up or down.

P

c

FRAMING GUIDLINE

(

defaults to

F

GRID 9)

Choose the type of framing grid available in shooting mode.

F

GRID 9

G

GRID 24

H

HD FRAMING

P P P

For “rule of thirds” composition. A six-by-four grid. Frame HD pictures in the crop shown by the

lines at the top and bottom of the display.

72

Using the Menus: Shooting Mode

C

AF ILLUMINATOR

(

defaults to

ON)

If ON is selected, the AF-assist illuminator will light to assist autofocus.

R The AF-assist illuminator turns o automatically in silent mode.

Q The camera may be unable to focus using the AF-assist illuminator in some cases. If the camera is unable to focus in macro

mode, try increasing the distance to the subject.

Q Avoid shining the AF-assist illuminator directly into your subject’s eyes.

k

AE/AF-LOCK MODE

(

defaults to

AE & AF ON WHEN PRESSING)

If AE & AF ON WHEN PRESSING is selected, exposure and/or focus will lock while the AFL/AEL button is pressed. If AE & AF ON/

OFF SWITCH is selected, exposure and/or focus will lock while the AFL/AEL button is pressed and remain locked until the button

is pressed again.

v

AE/AF-LOCK BUTTON

(

defaults to

AE LOCK ONLY)

Choose the role played by the AFL/AEL button (P 43).

m

AUTOROTATE PB

(

defaults to

ON)

Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.

p

FLASH MODE

Choose a  ash mode for optional  ash units (

P 54).

I

FLASH

(

defaults to

±0)

Adjust  ash brightness. Choose from values between +

/

 EV and –

/

 EV. Note that the desired results may not be achieved

depending on shooting conditions and the distance to the subject.

73

Menus

Using the Menus: Shooting Mode

B

RED EYE REMOVAL

(

defaults to

OFF)

Choose ON to remove red-eye e ects caused by the  ash.

R Red-eye reduction is performed only when a face is detected.

R Red-eye removal is not available with RAW images.

n

SAVE ORG IMAGE

(

defaults to

OFF)

Choose ON to save unprocessed copies of pictures taken using B RED EYE REMOVAL.

W

MOVIE MODE

(

defaults to

i

)

Choose a frame size for movie recording (

P 39).

74

Using the Menus: Playback Mode

To display the playback menu, press MENU/OK in playback mode. Highlight items

and press the selector right to view options, then highlight an option and press

MENU/OK. Press DISP/BACK to exit when settings are complete.

PLAYBACK MENU

ERASE

RED EYE REMOVAL

PROTECT

RESIZE

RAW CONVERSION

CROP

IMAGE ROTATE

EXIT

Playback Menu Options

j

RAW CONVERSION

Create JPEG copies of RAW pictures (P 56).

A

ERASE

Delete all or selected pictures (P 65).

G

CROP

Create a cropped copy of the current picture.

1

Display the desired picture.

2

Select G CROP in the playback menu.

3

Use the k and n buttons to zoom in and out and press the selector up, down, left, or right to scroll the picture until the

desired portion is displayed.

4

Press MENU/OK to display a con rmation dialog.

5

Press MENU/OK again to save the cropped copy to a separate  le.

R Larger crops produce larger copies; all copies have an aspect ratio of 3 : 2. If the size of the  nal copy will be a, OK will be

displayed in yellow.

75

Menus

Using the Menus: Playback Mode

e

RESIZE

Create a cropped copy of the current picture.

1

Display the desired picture.

2

Select e RESIZE in the playback menu.

3

Highlight a size and press MENU/OK to display a con rmation dialog.

4

Press MENU/OK again to save the resized copy to a separate  le.

R The sizes available vary with the size of the original image.

D

PROTECT

Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK.

• FRAME: Protect selected pictures. Press the selector left or right to view pictures and press MENU/OK to select or deselect. Press

DISP/BACK when the operation is complete.

• SET ALL: Protect all pictures.

• RESET ALL: Remove protection from all pictures.

Q Protected pictures will be deleted when the memory card is formatted (P 83).

C

IMAGE ROTATE

Rotate pictures.

1

Display the desired picture.

2

Select C IMAGE ROTATE in the playback menu.

3

Press the selector down to rotate the picture 90 ° clockwise, up to rotate it 90 ° counterclockwise.

4

Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it is played back on the camera.

R Protected pictures can not be rotated. Remove protection before rotating pictures (P 75).

R The camera may not be able to rotate pictures created with other devices.

R Pictures taken with m AUTOROTATE PB are automatically displayed in the correct orientation during playback (P 72).

76

Using the Menus: Playback Mode

B

RED EYE REMOVAL

Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create

a copy with reduced red-eye.

1

Display the desired picture.

2

Select B RED EYE REMOVAL in the playback menu.

3

Press MENU/OK.

R Red eye may not be removed if the camera is unable to detect a face or the face is in pro le. Results may di er depending on

the scene. Red eye can not be removed from pictures that have already been processed using red-eye removal or pictures

created with other devices.

R The amount of time needed to process the image varies with the number of faces detected.

R Copies created with B RED EYE REMOVAL are indicated by a e icon during playback.

R Red eye removal can not be performed on RAW images.

I

SLIDE SHOW

View pictures in an automated slide show. Choose the type of show and press MENU/OK to start. Press DISP/BACK at any time dur-

ing the show to view on-screen help. The show can be ended at any time by pressing MENU/OK.

Option

Description

NORMAL

Press the selector left or right to go back or skip ahead one frame. Select FADE-IN for fade transitions between

frames.

FADE-IN

NORMAL

g

As above, except that camera automatically zooms in on faces.

FADE-IN

g

MULTIPLE

MULTIPLE Display several pictures at once.

R The camera will not turn o automatically while a slide show is in progress.

77

Menus

Using the Menus: Playback Mode

m

PHOTOBOOK ASSIST

Create books from your favorite photos (P 61).

j

MARK FOR UPLOAD TO

Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).

1

Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and movies for upload to Facebook.

2

Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press DISP/BACK to exit when all the

desired pictures are selected.

R Only movies can be selected for upload to YouTube.

R During playback, selected pictures are marked with j YouTube or j FACEBOOK indicators.

R Choose RESET ALL to deselect all pictures. If the number of pictures a ected is very large, a message will be displayed while

the operation is in progress. Press DISP/BACK to exit before the operation is complete.

Uploading Pictures (Windows Only)

Selected pictures can be uploaded using the

YouTube/Facebook Upload

op-

tion in MyFinePix Studio. For information on installing MyFinePix Studio and

connecting the camera to a computer, see “Viewing Pictures on a Computer”

(

P

90

).

Select with camera

Upload from computer

b

IMAGE SEARCH

Search for pictures (P 60).

K

PRINT ORDER (DPOF)

Select pictures for printing on DPOF- and PictBridge-compatible devices (P 87).

78

Using the Menus: Playback Mode

J

DISP ASPECT

Choose how High De nition (HD) devices display pictures with an aspect ratio of 3 : 2

(this option is available only when an HDMI cable is connected). Select 16 : 9 to display

the image so that it  lls the screen with its top and bottom cropped out, 3 : 2 to display

the entire image with black bands at either side.

3:2

16:9

16 : 9

3 : 2

I

PLAYBACK VOLUME

(

defaults to

7)

Control the volume for movie playback.

79

Menus

The Setup Menu

Using the Setup Menu

1

Display the setup menu.

1.1 Press MENU/OK to display the menu for the current mode.

1.2 Press the selector left to highlight the tab for the current menu.

1.3 Press the selector down to highlight Z.

SET-UP

DATE/TIME

TIME DIFFERENCE

SILENT MODE

FRAME NO.

FOCUS RING

OFF

CONT.

ENGLISH

RESET

EXIT

Tab

1.4 Press the selector right to place the cursor in the setup menu.

2

Adjust settings.

Highlight items and press the selector right to view options, then highlight an option and press

MENU/OK. Press DISP/BACK to exit when settings are complete.

80

The Setup Menu

Setup Menu Options

F

DATE/TIME

Set the camera clock (P 18).

N

TIME DIFFERENCE

(

defaults to

h

)

Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the

di erence between local time and your home time zone:

1

Highlight g LOCAL and press the selector right.

2

Use the selector to choose the time di erence between local time and your home time zone. Press MENU/OK when settings

are complete.

To set the camera clock to local time, highlight g LOCAL and press MENU/OK. To set the clock to the time in your home time

zone, select h HOME. If g LOCAL is selected, g will be displayed for three seconds when the camera is turned on.

L

a

Choose a language (P 18).

R

RESET

Reset all settings except F DATE/TIME, N TIME DIFFERENCE, and O BACKGROUND COLOR to default values. Press the

selector right to display a con rmation dialog, then highlight OK and press MENU/OK.

o

SILENT MODE

(

defaults to

OFF)

Select ON to disable the speaker,  ash, and illuminator in situations in which camera sounds or lights may be unwelcome (

P 30).

81

Menus

The Setup Menu

B

FRAME NO.

(

defaults to

CONTINUOUS)

New pictures are stored in image  les named using a four-digit  le number assigned by adding one to the

last  le number used. The  le number is displayed during playback as shown at right. B FRAME NO. con-

trols whether  le numbering is reset to 0001 when a new memory card is inserted or the current memory

card is formatted.

Directory

number

File

number

Frame number

100-0001

Option

Description

CONTINUOUS

Numbering continues from the last  le number used or the  rst available  le number, whichever is higher.

Choose this option to reduce the number of pictures with duplicate  le names.

RENEW

RENEW Numbering is reset to 0001 after formatting or when a new memory card is inserted.

R If the frame number reaches 999-9999, the shutter release will be disabled (P 107).

R Selecting R RESET (P 80) sets B FRAME NO. to CONTINUOUS but does not reset the  le number.

R Frame numbers for pictures taken with other cameras may di er.

I

FOCUS RING

(

defaults to

X

CW)

Choose the direction in which the focus ring is rotated to increase the focus distance.

J

LCD BRIGHTNESS

(

defaults to

0)

Control the brightness of the displays.

U

POWER SAVE MODE

(

defaults to

OFF)

Select ON to reduce the drain on the battery, increasing the number of pictures that can be taken on a single charge (P 23).

H

QUICK START MODE

(

defaults to

OFF)

Select ON to reduce the time needed to restart the camera after it has been turned o (P 23).

82

The Setup Menu

M

AUTO POWER OFF

(

defaults to

2 MIN)

Choose the length of time before the camera turns o automatically when no operations are performed. Shorter times reduce

the drain on the battery; if OFF is selected, the camera must be turned o manually. Note that in some situations the camera

turns o automatically even when OFF is selected.

G

OPERATION VOL.

(

defaults to

c

)

Adjust the volume of the sounds produced when camera controls are operated. Choose e OFF (mute) to disable control sounds.

A

IMAGE DISP.

(

defaults to

1.5 SEC)

Choose how long images are displayed after shooting. Colors may di er slightly from those in the  nal image and “noise” mot-

tling may be visible at high sensitivities.

Option

Description

CONTINUOUS

Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom

in on the active focus point, press the center of the command control; press again to cancel zoom.

1.5 SEC

Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC) or until the shutter button is pressed

halfway.

3 SEC

OFF

OFF Pictures are not displayed after shooting.

R OFF has no e ect in continuous shooting mode.

V

SENSOR CLEANING

Remove dust from the camera image sensor.

Option

Description

OK

Clean sensor immediately (

P xi).

WHEN SWITCHED ON

WHEN SWITCHED ON Sensor cleaning is performed when the camera turns on.

WHEN SWITCHED OFF

Sensor cleaning is performed when the camera turns o (sensor cleaning is not however performed if the

camera turns o in playback mode).

R Dust that can not be removed using sensor cleaning can be removed manually (P 101).

83

Menus

The Setup Menu

J

COLOR SPACE

(

defaults to

sRGB)

Choose the gamut of colors available for color reproduction.

Option

Description

sRGB

sRGB Recommended in most situations.

Adobe RGB

Adobe RGB For commercial printing.

c

GUIDANCE DISPLAY

(

defaults to

ON)

Choose whether to display tool tips.

M

FOCUS SCALE UNITS

(

defaults to

METERS

)

Choose the units used for the focus distance indicator (P 45).

O

BACKGROUND COLOR

Choose a color scheme.

K

FORMAT

Select OK to format the memory card.

Q All data—including protected pictures—will be deleted from the memory card. Be sure important  les have been copied to

a computer or other storage device.

Q Do not open the battery-chamber cover during formatting.

84

Connections

Viewing Pictures on TV

To show pictures to a group, connect the camera to a TV using an HDMI cable (available separately

from third-party suppliers; note that the TV can only be used for playback, not shooting).

1

Turn the camera o .

2

Connect the cable as shown below.

Insert into HDMI mini

connector

Insert into HDMI

connector

R Be sure the connectors are fully inserted.

3

Tune the television to the HDMI input channel. See the documentation supplied with the televi-

sion for details.

4

Turn the camera on and press a button. The camera monitor turns o and pictures and movies

are played back on the TV. Note that the camera volume controls have no e ect on sounds played

on the TV; use the television volume controls to adjust the volume.

R The USB cable can not be used while an HDMI cable is connected.

R Some televisions may brie y display a black screen when movie playback begins.

85

Connections

Printing Pictures via USB

If the printer supports PictBridge, the camera can be connected directly to the printer and

pictures can be printed without  rst being copied to a computer. Note that depending on the

printer, not all the functions described below may be supported.

Connecting the Camera

1

Connect the supplied USB cable as shown and

turn the printer on.

2

Turn the camera on. t USB will be displayed

in the monitor, followed by the PictBridge dis-

play shown below at right.

USB

00

OK SET

FRAME

SHEETS

PICTBRIDGE

TOTAL:

00000

R Pictures can be printed from memory cards that has

been formatted in the camera.

R Page size, print quality, and border selections are

made using the printer.

Printing Selected Pictures

1

Press the selector left or right to dis-

play a picture you wish to print.

R To print one copy of the current picture, pro-

ceed directly to Step 3.

2

Press the selector up or down to

choose the number of copies (up to

99). Repeat steps 1–2 to select ad-

ditional pictures.

3

Press MENU/OK to display a con rma-

tion dialog.

CANCELYES

PRINT THESE FRAMES

TOTAL:

9

SHEETS

4

Press MENU/OK to start printing.

86

Printing Pictures via USB

Printing the Date of Recording

To print the date of recording on pictures, press

DISP/BACK in the PictBridge display and select PRINT

WITH DATE s (to print pictures without the date of

recording, select PRINT WITHOUT DATE). To ensure

that the date is correct, set the camera clock before

taking pictures. Some printers do not support date

printing. See the printer manual for details.

Printing the DPOF Print Order

To print the print order created with K PRINT

ORDER (DPOF) in the playback menu (P 77):

1

In the PictBridge display, press DISP/

BACK to open the PictBridge menu.

2

Press the selector up or down to

highlight u PRINT DPOF.

PICTBRIDGE

PRINT WITH DATE

s

PRINT DPOF

PRINT WITHOUT DATE

3

Press MENU/OK to display a con rma-

tion dialog.

TOTAL:

9

SHEETS

CANCELYES

PRINT DPOF OK?

4

Press MENU/OK to start printing.

87

Connections

Printing Pictures via USB

During Printing

The message shown at right is

displayed during printing. Press

DISP/BACK to cancel before all

pictures are printed (depending

on the printer, printing may end

before the current picture has

printed).

If printing is interrupted, turn the camera o and

then on again.

Disconnecting the Camera

Con rm that the above message is not displayed and

turn the camera o . Disconnect the USB cable.

Creating a DPOF Print Order

The K PRINT ORDER (DPOF) option in the play-

back menu can be used to create a digital “print

order” for PictBridge-compatible printers or de-

vices that support DPOF.

DPOF

DPOF (Digital Print Order Format) is stan-

dard that allows pictures to be printed from

“print orders” stored on the memory card.

The information in the order includes the

pictures to be printed and the number of copies of

each picture.

CANCEL

PRINTING

88

Printing Pictures via USB

■ WITH DATE s/ WITHOUT DATE

To modify the DPOF print order, select K PRINT

ORDER (DPOF) in the playback menu and press

the selector up or down to highlight WITH

DATE s or WITHOUT DATE.

PLAYBACK MENU

DISP ASPECT

PLAYBACK VOLUME

PRINT ORDER

(

DPOF

)

PHOTOBOOK ASSIST

MARK FOR UPLOAD TO

IMAGE SEARCH

SLIDE SHOW

WITHOUT DATE

RESET ALL

WITH DATE

s

WITH DATE s: Print date of recording

on pictures.

WITHOUT DATE: Print pictures without

date.

Press MENU/OK and follow the steps below.

1

Press the selector left or right to dis-

play a picture you wish to include in

or remove from the print order.

2

Press the selector up or down to

choose the number of copies (up

to 99). To remove a picture from the

order, press the selector down until

the number of copies is 0.

SHEETS

DPOF:

00001

01

PRINT ORDER

(

DPOF

)

SETFRAME

Total number of prints

Number of copies

3

Repeat steps 1–2 to complete the

print order. Press MENU/OK to save

the print order when settings are

complete, or DISP/BACK to exit with-

out changing the print order.

4

The total number of prints is dis-

played in the monitor. Press MENU/

OK to exit.

The pictures in the current

print order are indicated by a

u icon during playback.

89

Connections

Printing Pictures via USB

■ RESET ALL

To cancel the current print

order, select RESET ALL for

K PRINT ORDER (DPOF). The

con rmation shown at right

will be displayed; press MENU/OK

to remove all pictures from the

order.

R Print orders can contain a maximum of 999 pictures.

R If a memory card is inserted

containing a print order cre-

ated by another camera, the

message shown at right will

be displayed. Pressing MENU/OK

cancels the print order; a new

print order must be created as

described above.

RESET DPOF OK?

CANCELYES

NOYES

RESET DPOF OK?

90

Viewing Pictures on a Computer

The supplied software can be used to copy pictures to a computer, where they can be stored, viewed,

organized, and printed. Before proceeding, install the software as described below. Do NOT connect

the camera to the computer until installation is complete.

Windows: Installing MyFinePix Studio

1

Con rm that the computer meets the following system requirements:

Windows 7 (Service Pack 1)/Windows Vista (Service Pack 2)

1

Windows XP (Service Pack 3)

1

CPU

3 GHz Pentium 4 or better

(2.4

GHz Core 2 Duo or better

2

)

2 GHz Pentium 4 or better

(2.4

GHz Core 2 Duo or better

2

)

RAM

1 GB or more

512 MB or more (1

GB or more

2

)

Free disk space

2 GB or more

GPU

Supports DirectX 9 or later (recommended)

Supports DirectX 7 or later (required; performance

not guaranteed with other GPUs)

Video

Video 1024 × 768 pixels or more with 24-bit color or better

Other

• Built-in USB port recommended. Operation is not guaranteed with other USB ports.

• .NET Framework 3.5 Service Pack 1 required when uploading images or using Map Viewer.

• Internet connection (broadband recommended) required to install .NET Framework (if necessary), to use

auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail.

1 Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not

guaranteed on home-built computers or computers that have been upgraded from earlier versions of Windows.

2 Recommended when displaying HD movies.

2

Start the computer. Log in to an account with administrator privileges before proceeding.

91

Connections

Viewing Pictures on a Computer

3

Exit any applications that may be running and insert the installer CD in a CD-ROM drive.

Windows 7/Windows Vista

If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control” dialog will then be displayed;

click Ye s (Windows 7) or Allow (Windows Vista).

The installer will start automatically; click Install MyFinePix Studio and follow the on-screen in-

structions to install MyFinePix Studio and RAW FILE CONVERTER.

If the Installer Does Not Start Automatically

If the installer does not start automatically, select Computer or My Computer from the Start menu, then

double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click setup or SETUP.EXE.

4

If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to com-

plete installation.

5

Remove the installer CD from the CD-ROM drive when installation is complete. Store the installer

CD in a dry location out of direct sunlight in case you need to re-install the software.

Installation is now complete. Proceed to “Connecting the Camera” (P 94).

92

Viewing Pictures on a Computer

Macintosh: Installing FinePixViewer

1

Con rm that the computer meets the following system requirements:

CPU

CPU PowerPC or Intel (Core 2 Duo or better)

OS

Pre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.com/support/digital_cameras/

compatibility/ for more information). Mac OS X version 10.7 and later not supported.

RAM

RAM 256 MB or more (1 GB or more recommended when displaying HD movies)

Free disk space

Free disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running

Video

Video 800 × 600 pixels or more with thousands of colors or better

Other

Other Built-in USB port recommended. Operation is not guaranteed with other USB ports.

2

After starting the computer and quitting any applications that may be running, insert the installer

CD in a CD-ROM drive and double-click Installer for Mac OS X.

3

An installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter an

administrator name and password when prompted and click OK, then follow the on-screen in-

structions to install FinePixViewer. Click Exit to quit the installer when installation is complete.

R To install RAW FILE CONVERTER, double-click SILKYRFCEXInstaller. RAW FILE CONVERTER is used to view

RAW images on your computer.

4

Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD

if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry

location out of direct sunlight in case you need to re-install the software.

93

Connections

Viewing Pictures on a Computer

5

Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture, and select Preferences…

from the Image Capture application menu. The Image Capture preferences dialog will be displayed;

choose Other… in the When a camera is connected, open menu, then select FPVBridge in the

“Applications/FinePixViewer” folder and click Open. Quit Image Capture.

Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications” folder and start Image

Capture. The camera will be listed under DEVICES; select the camera and choose FPVBridge from

the Connecting this camera opens menu and click Choose. Quit Image Capture.

Installation is now complete. Proceed to “Connecting the Camera” (P 94).

94

Viewing Pictures on a Computer

Connecting the Camera

1

Find a memory card containing pictures you want to copy to the computer and insert the card into

the camera (P 14).

R Windows users may require the Windows CD when starting the software for the  rst time.

Q Loss of power during transfer could result in loss of data or damage to the memory card. Insert a fresh or

fully-charged battery before connecting the camera.

2

Turn the camera o and connect the supplied USB cable as

shown, making sure the connectors are fully inserted. Con-

nect the camera directly to the computer; do not use a USB

hub or keyboard.

3

Turn the camera on. MyFinePix Studio or FinePixViewer will start automatically; follow the on-screen

instructions to copy pictures to the computer. To exit without copying pictures, click Cancel.

Q If the software does not start automatically, it may not be correctly installed. Disconnect the camera and

reinstall the software.

For more information on using the supplied software, start the application and select the appropriate

option from the Help menu.

95

Connections

Viewing Pictures on a Computer

Q If a memory card containing a large number of images is inserted, there may be a delay before the software

starts and you may be unable to import or save images. Use a memory card reader to transfer pictures.

Q Make sure that the computer does not display a message stating that copying is in progress and that the indi-

cator lamp is out before turning the camera o or disconnecting the USB cable (if the number of images cop-

ied is very large, the indicator lamp may remain lit after the message has cleared from the computer display).

Failure to observe this precaution could result in loss of data or damage to the memory card.

Q Disconnect the camera before inserting or removing memory cards.

Q In some cases, it may not be possible to access pictures saved to a network server using the supplied software

in the same way as on a standalone computer.

Q The user bears all applicable fees charged by the phone company or Internet service provider when using

services that require an Internet connection.

Disconnecting the Camera

After con rming that the indicator lamp is out, turn the camera o and disconnect the USB cable.

Uninstalling the Supplied Software

Only uninstall the supplied software when it is no longer required or before beginning reinstallation. After

quitting the software and disconnecting the camera, drag the “FinePixViewer” folder from “Applications” into the

Trash and select Empty Trash in the Finder menu (Macintosh), or open the control panel and use “Programs

and Features” (Windows 7/Windows Vista) or “Add or Remove Programs” (Windows XP) to uninstall MyFinePix

Studio. Under Windows, one or more con rmation dialogs may be displayed; read the contents carefully before

clicking OK.

96

Technical Notes

Optional Accessories

The camera supports a wide range of accessories from FUJIFILM and other manufacturers.

Accessories from FUJIFILM

The following optional accessories are available from FUJIFILM. For the latest information on the accesso-

ries available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/

products/digital_cameras/index.html.

Rechargeable Li-ion batteries

NP-W126: Additional large-capacity NP-W126 rechargeable batteries can be purchased as required.

Battery chargers

BC-W126: Replacement battery chargers can be purchased as required. At+20 °C/+68 °F, the BC-W126

charges an NP-W126 in about 150 minutes.

FUJINON Lenses

XF18mmF2 R: F=18 mm, maximum aperture f/2.

XF35mmF1.4 R: F=35 mm, maximum aperture f/1.4.

XF60mmF2.4 R Macro: F=60 mm, maximum aperture f/2.4.

97

Technical Notes

Optional Accessories

Protector Filter

PRF-52: Protector Filter (diameter 52 mm).

PRF-39: Protector Filter (diameter 39 mm).

Grips

HG-XPro1: Features an improved grip.

Shoe-mounted  ash units

EF-20: This clip-on  ash unit (powered by two AA batteries) has a Guide Number of 20/66 (ISO 100, m/ft.)

and supports TTL  ash control. The  ash head can be rotated upwards 90° for bounce lighting.

EF-42: This clip-on  ash unit (powered by four AA batteries) has a Guide Number of 42/138 (ISO 100, m/ft.)

and supports TTL  ash control and auto power zoom in the range 24–105 mm (35 mm format equivalent).

The  ash head can be rotated 90° up, 180° left, or 120° right for bounce lighting.

EF-X20: This clip-on  ash unit has a Guide Number of 20/66 (ISO 100, m/ft.).

Leather cases

LC-XPro1: This leather case, exclusively for use with the X-Pro1, combines practicality with the luxury of leather and comes with

a shoulder strap made of the same material. Pictures can be taken with the camera still in its case.

98

Optional Accessories

Recommended Third-Party Accessories

Diopter adjustment lenses

COSINA diopter adjustment lenses are recommended for use with this camera.

99

Technical Notes

Optional Accessories

Connecting the Camera to Other Devices

X-Pro1

■

Lens

XF18mmF2 R

*

XF35mmF1.4 R

*

XF60mmF2.4 R Macro

*

* Available separately from FUJIFILM.

† Available separately from third-party suppliers.

USB cable (supplied)

SD card slot or card reader

Computer

†

■

Computer Related

■

Printing

Printer

†

PictBridge-compatible printer

†

USB cable

(supplied)

SD/SDHC/SDXC

memory card

†

■

Audio/Visual

HDTV

†

HDMI cable

†

■

Flash Photography

EF-20 shoe mount

 ash

*

EF-42 shoe mount

 ash

*

EF-X20 shoe

mount  ash

*

100

Caring for the Camera

To ensure continued enjoyment of the product, observe the following precautions.

Storage and Use

If the camera will not be used for an extended pe-

riod, remove the battery and memory card. Do

not store or use the camera in locations that are:

• exposed to rain, steam, or smoke

• very humid or extremely dusty

• exposed to direct sunlight or very high temper-

atures, such as in a closed vehicle on a sunny

day

• extremely cold

• subject to strong vibration

• exposed to strong magnetic  elds, such as near

a broadcasting antenna, power line, radar emit-

ter, motor, transformer, or magnet

• in contact with volatile chemicals such as pes-

ticides

• next to rubber or vinyl products

■ Water and Sand

Exposure to water and sand can also damage the

camera and its internal circuitry and mechanisms.

When using the camera at the beach or seaside,

avoid exposing the camera to water or sand. Do

not place the camera on a wet surface.

■ Condensation

Sudden increases in temperature, such as occur

when entering a heated building on a cold day,

can cause condensation inside the camera. If this

occurs, turn the camera o and wait an hour be-

fore turning it on again. If condensation forms on

the memory card, remove the card and wait for

the condensation to dissipate.

Traveling

Keep the camera in your carry-on baggage.

Checked baggage may su er violent shocks that

could damage the camera.

101

Technical Notes

Cleaning the Image Sensor

Multiple photographs marred by spots or blotches in identical locations may indicate the presence

of dust on the camera image sensor. Clean the sensor using the V SENSOR CLEANING option in

the setup menu (P 82); if the problem persists, you can clean the sensor manually as described below.

Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning.

1

Use a blower (not a brush) to remove dust from the sensor.

Q Do not use a brush or blower brush. Failure to observe this precaution could damage the sensor.

2

Check whether the dust has been successfully removed.

R Repeat Steps 1 and 2 as necessary.

3

Replace the body cap or lens.

102

Troubleshooting

Problems and Solutions

Power and Battery

Problem

Solution

The camera does not

turn on.

•

The battery is exhausted

: Charge the battery (

P

12) or insert a fully-charged spare battery (

P

13).

•

The battery is inserted incorrectly

: Reinsert in the correct orientation (

P

13).

•

The battery-chamber cover is not latched

: Latch the battery-chamber cover (

P

14).

The battery runs down

quickly.

•

The battery is cold

: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera

immediately before taking a picture.

•

There is dirt on the battery terminals

: Clean the terminals with a soft, dry cloth.

•

C is selected for focus mode

: Select a diﬀ erent focus mode (

P

45).

•

The battery has been charged many times

: The battery has reached the end of its charging life. Purchase a new

battery.

The camera turns o

suddenly.

The battery is exhausted

: Charge the battery (

P

12) or insert a fully-charged spare battery (

P

13).

Charging does not start.

Reinsert the battery in the correct orientation and make sure that the charger is plugged in (

P

12).

Charging is slow.

Charge the battery at room temperature (

P

iv).

The charging lamp lights,

but the battery does not

charge.

•

There is dirt on the battery terminals

: Clean the terminals with a soft, dry cloth.

•

The battery has been charged many times

: The battery has reached the end of its charging life. Purchase a new

battery. If the battery still fails to charge, contact your FUJIFILM dealer.

Menus and Displays

Problem

Solution

Display is not in English.

Select

ENGLISH

for

L

a

(

P

80).

103

Troubleshooting

Problems and Solutions

Shooting

Problem

Solution

No picture is taken when

the shutter button is

pressed.

•

Memory is full

: Insert a new memory card or delete pictures (

P

14, 65).

•

Memory is not formatted

: Format the memory card (

P

83).

•

There is dirt on the memory card contacts

: Clean the contacts with a soft, dry cloth.

•

The memory card is damaged

: Insert a new memory card (

P

14).

•

The battery is exhausted

: Charge the battery (

P

12) or insert a fully-charged spare battery (

P

13).

•

The camera has turned o automatically

: Turn the camera on (

P

17).

•

The indicator lamp was orange when you attempted to record a panorama

: Wait until the indicator lamps turns oﬀ

(

P

3).

Mottling (“noise”) appears

in the monitor or

electronic view nder

when the shutter button is

pressed halfway.

Gain is increased to aid composition when the subject is poorly lit and aperture is stopped down, which may result

in noticeable mottling when images are previewed in the displays. Images taken with the camera are unaﬀ ected.

The camera does not focus.

•

The subject is close to the camera

: Select macro mode (

P

31).

•

The subject is far away from the camera

: Cancel macro mode (

P

31).

•

The subject is not suited to autofocus

: Use focus lock (

P

43) or manual focus (

P

45).

The  ash does not  re.

•

The  ash can not be used at current settings

: See the list of the settings that can be used with the ﬂ ash (

P

54).

•

The  ash is o (

P

)

: Choose a diﬀ erent ﬂ ash mode (

P

54).

•

The battery is exhausted

: Charge the battery (

P

12) or insert a fully-charged spare battery (

P

13).

•

The camera is in continuous mode

: Select a diﬀ erent drive mode (

P

34).

•

The camera is in silent mode

: Turn silent mode oﬀ (

P

30, 80).

Some  ash modes are not

available.

The camera is in silent mode. Turn silent mode oﬀ (

P

30, 80).

104

Problems and Solutions

Problem

Solution

The  ash does not fully

light the subject.

•

The subject is not in range of the  ash

: Position the subject in range of the ﬂ ash.

•

The  ash window is obstructed

: Hold the camera correctly.

•

Shutter speed is faster than



/



s

: Choose a slower shutter speed (

P

25, 27).

Pictures are blurred.

•

The lens is dirty

: Clean the lens (

P

xi).

•

The lens is blocked

: Keep objects away from the lens.

•

s

is displayed during shooting and the focus frame is displayed in red

: Check focus before shooting (

P

30).

•

k

is displayed during shooting

: Use the ﬂ ash or mount the camera on a tripod (

P

54).

Pictures are mottled.

•

Shutter speed is slow and the ambient temperature is high

: This is normal and does not indicate a malfunction.

•

The camera has been used continuously at high temperatures or a temperature warning is displayed

: Turn the cam-

era oﬀ and wait for it to cool down.

Playback

Problem

Solution

Pictures are grainy.

The pictures were taken with a diﬀ erent make or model of camera.

Playback zoom is unavail-

able.

The pictures were created using

O

RESIZE

or with a diﬀ erent make or model of camera.

No sound in movie

playback.

•

Playback volume is too low

: Adjust playback volume (

P

78).

•

The microphone was obstructed

: Hold the camera correctly during recording (

P

2, 39).

•

The speaker is obstructed

: Hold the camera correctly during playback (

P

2, 59).

•

The camera is in silent mode

: Turn silent mode oﬀ (

P

30, 80).

Selected pictures are not

deleted.

Some of the pictures selected for deletion are protected. Remove protection using the device with which it was

originally applied (

P

75).

File numbering is unex-

pectedly reset.

The battery-chamber cover was opened while the camera was on. Turn the camera oﬀ before opening the bat-

tery-chamber cover (

P

13, 17).

105

Troubleshooting

Problems and Solutions

Connections/Miscellaneous

Problem

Solution

No picture or sound.

•

The camera is not properly connected

: Connect the camera properly (

P

84

). Note that once the camera is con-

nected, pictures will be displayed on the TV instead of in the camera monitor.

•

Input on the television is set to “TV”

: Set input to “HDMI”.

•

The volume on the TV is too low

: Use the controls on the television to adjust the volume.

The computer does not

recognize the camera.

Be sure the camera and computer are correctly connected (

P

94

).

Can not transfer RAW or

JPEG  les to computer.

Use the bundled software to transfer pictures (

P

90

).

Pictures can not be

printed.

•

The camera is not properly connected

: Connect the camera correctly (

P

85

).

•

The printer is o

: Turn the printer on.

Only one copy is printed/

the date is not printed.

The printer is not PictBridge compatible.

The camera is unrespon-

sive.

•

Temporary camera malfunction

: Remove and reinsert the battery (

P

13, 15).

•

The battery is exhausted

: Charge the battery (

P

12) or insert a fully-charged spare battery (

P

13).

The camera does not func-

tion as expected.

Remove and reinsert the battery (

P

13, 15). If the problem persists, contact your FUJIFILM dealer.

No sound.

Turn silent mode oﬀ (

P

30, 80).

106

Warning Messages and Displays

The following warnings appear in the display.

Warning

Description

B

(red)

Low battery. Charge the battery (

P

12) or insert a fully-charged spare battery (

P

13).

A

(blinks red)

Battery exhausted. Charge the battery (

P

12) or insert a fully-charged spare battery (

P

13).

k

Slow shutter speed. Pictures may be blurred; use the ﬂ ash or a tripod.

s

(displayed in red with

red focus frame)

The camera can not focus. Try one of the following solutions:

•

Use focus lock to focus on another subject at the same distance, then recompose the picture (

P

43).

•

Use macro mode to focus when taking close-ups (

P

31).

Aperture or shutter speed

displayed in red

The subject is too bright or too dark and the picture will be over- or under-exposed. If the subject is dark, use the

ﬂ ash (

P

54).

FOCUS ERROR

Camera malfunction. Turn the camera oﬀ and then on again. If the message persists, contact a FUJIFILM dealer.

TURN OFF THE CAMERA

AND TURN ON AGAIN

LENS CONTROL ERROR

LENS ERROR

Turn the camera oﬀ , remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera

on. If the problem persists, contact a FUJIFILM dealer.

BUSY

The memory card is incorrectly formatted. Use the camera to format the card (

P

83).

CARD NOT INITIALIZED

•

The memory card is not formatted or the memory card has been formatted in a computer or other device

: Format the

memory card using the

K

FORMAT

option in the camera setup menu (

P

83).

•

The memory card contacts require cleaning

: Clean the contacts with a soft, dry cloth. If the message is repeated,

format the card (

P

83). If the message persists, replace the card.

•

Camera malfunction

: Contact a FUJIFILM dealer.

PROTECTED CARD

The memory card is locked. Unlock the card (

P

14).

107

Troubleshooting

Warning Messages and Display

Warning

Description

CARD ERROR

•

The memory card is not formatted for use in the camera

: Format the card (

P

83).

•

The memory card contacts require cleaning or the memory card is damaged

: Clean the contacts with a soft, dry

cloth. If the message is repeated, format the card (

P

83). If the message persists, replace the card.

•

Incompatible memory card

: Use a compatible card (

P

16).

•

Camera malfunction

: Contact a FUJIFILM dealer.

b

MEMORY FULL

The memory card is full and pictures can not be recorded. Delete pictures (

P

65) or insert a memory card with

more free space (

P

14).

NO CARD

The shutter can only be released when a memory card is inserted. Insert a memory card.

WRITE ERROR

•

Memory card error or connection error

: Reinsert the card or turn the camera oﬀ and then on again. If the message

persists, contact a FUJIFILM dealer.

•

Not enough memory remaining to record additional pictures

: Delete pictures (

P

65) or insert a memory card

with more free space (

P

14).

•

The memory card is not formatted

: Format the memory card (

P

83).

READ ERROR

•

The  le is corrupt or was not created with the camera

: The ﬁ le can not be viewed.

•

The memory card contacts require cleaning

: Clean the contacts with a soft, dry cloth. If the message is repeated,

format the card (

P

83). If the message persists, replace the card.

•

Camera malfunction

: Contact a FUJIFILM dealer.

FRAME NO. FULL

The camera has run out of frame numbers (current frame number is 999-9999). Format the memory card and

select

RENEW

for

B

FRAME NO.

Take a picture to reset frame numbering to 100-0001, then select

CONTINU-

OUS

for

B

FRAME NO.

(

P

81).

TOO MANY FRAMES

•

A search has returned more than 30,000 results

: Choose a search that returns fewer results.

•

More than 999 images are selected for deletion

: Choose fewer images.

108

Warning Messages and Display

Warning

Description

PROTECTED FRAME

An attempt was made to delete or rotate to a protected picture. Remove protection and try again (

P

75).

CAN NOT CROP

The picture is damaged or was not created with the camera.

m

CANNOT EXECUTE

Red-eye removal can not be applied to pictures created with other devices.

F

CANNOT EXECUTE

Red-eye removal can not be applied to movies.

CAN NOT ROTATE

The selected picture can not be rotated.

F

CAN NOT ROTATE

Movies can not be rotated.

DPOF FILE ERROR

The DPOF print order on the current memory card contains more than 999 images. Copy the pictures to a com-

puter and create a new print order.

CAN NOT SET DPOF

The picture can not be printed using DPOF.

F

CAN NOT SET DPOF

Movies can not be printed using DPOF.

COMMUNICATION ERROR

A connection error occurred while pictures were being printed or copied to a computer or other device. Conﬁ rm

that the device is turned on and that the USB cable is connected.

PRINTER ERROR

Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). To resume printing,

turn the printer oﬀ and then turn it back on.

PRINTER ERROR

RESUME?

Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If printing does not

resume automatically, press

MENU/OK

to resume.

CANNOT BE PRINTED

An attempt was made to print a movie, a picture not created with the camera, or a picture in a format not sup-

ported by the printer. Movies, RAW images, and some pictures created with other devices can not be printed; if

the picture is a still picture created with the camera, check the printer manual to conﬁ rm that the printer supports

the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures can not be printed.

p

Turn the camera oﬀ and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.

109

Appendix

Glossary

DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders” stored

on a memory card. The information in the order includes the pictures to be printed and the number of

copies of each picture.

EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount

of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV

increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering the

camera can be controlled by adjusting aperture and shutter speed.

Exif Print: A standard for storing information with pictures for optimal color reproduction during printing.

HDMI (High-De nition Multimedia Interface): An interface standard for the transmission of images and sound that

adds audio input to the DVI interface used to connect computers to displays.

JPEG (Joint Photographic Experts Group): A compressed  le format for color images. The higher the compression

rate, the greater the loss of information and more noticeable drop in quality when the picture is displayed.

MOV: A movie  le format (extension “.mov”) developed by Apple, Inc., and viewed using QuickTime Player. This

format is popular on the Internet.

White balance: The human brain automatically adapts to changes in the color of light, with the result that objects

that appear white under one light source still appear white when the color of the light source changes. Digital

cameras can mimic this adjustment by processing images according to the color of the light source. This process

is known as “white balance.”

110

Memory Card Capacity

The following table shows the recording time or number of pictures available at di erent image sizes.

All  gures are approximate;  le size varies with the scene recorded, producing wide variations in the

number of  les that can be stored. The number of exposures or length remaining may not diminish

at an even rate.

Capacity

O

4 GB

8 GB

T

FINE

T

NORMAL

T

FINE

T

NORMAL

Photographs

O

3 : 2

620

990

1250

1990

O

16 : 9

730

1160

1480

2340

O

1 : 1

930

1450

1870

2920

P

3 : 2

990

1930

1990

3880

P

16 : 9

1160

2290

2340

4600

P

1 : 1

1470

2810

2960

5650

Q

3 : 2

1850

3540

3710

7110

Q

16 : 9

2170

4130

4360

8290

Q

1 : 1

2750

3990

5530

8020

Panoramas

O

(vertical)

480

950

970

1910

O

(horizontal)

720

1400

1440

2820

P

(vertical)

720

1400

1440

2820

P

(horizontal)

1060

2100

2140

4210

RAW

160

320

Movies

*

h

1280

38 min.

76 min.

i

1920

54 min.

109 min.

* Use a G card or better. Individual movies can not exceed 29 minutes in length.

111

Appendix

Speci cations

System

Model

X

-Pro1 digital camera

E ective pixels

16.3 million

Image sensor

23.6 mm × 15.6 mm (APS-C format) CMOS (complementary metal-oxide semiconductor) image sensor with

square pixels and primary color ﬁ lter

Storage media

FUJIFILM-recommended SD/SDHC/SDXC memory cards

File system

Compliant with

D

esign Rule for

C

amera

F

ile System

(DCF)

, Exif 2.3, and

D

igital

P

rint

O

rder

F

ormat

(DPOF)

File format

•

Still pictures

: Exif 2.3 JPEG

(compressed)

; RAW

(original RAF format, special-purpose software required)

; RAW+JPG available

•

Movies

: H.264 standard with stereo sound

(MOV)

Image size

•

O

3 : 2

: 4,896 × 3,624

•

O

16 : 9

: 4,896 × 2,760

•

O

1 : 1

: 3,264 × 3,264

•

P

3 : 2

: 3,456 × 2,304

•

P

16 : 9

: 3,456 × 1,944

•

P

1 : 1

: 2,304 × 2,304

•

Q

3 : 2

: 2,496 × 1,664

•

Q

16 : 9

: 2,496 × 1,408

•

Q

1 : 1

: 1,664 × 1,664

•

O

panorama

: 2,160 × 7,680

(vertical)

/ 7,680 × 1,440

(horizontal)

•

P

panorama

: 2,160 × 5,120

(vertical)

/ 5,120 × 1,440

(horizontal)

Lens mount

FUJIFILM X mount

Sensitivity

Standard output sensitivity equivalent to ISO 200 – 6400 in increments of



/



EV; AUTO (400), AUTO (800), AUTO

(1600), AUTO (3200); extended output sensitivity equivalent ISO 100, 12800, or 25600

Metering

256-segment

t

hrough-

t

he-

l

ens (TTL) metering; MULTI, SPOT, AVERAGE

Exposure control

Programmed AE

(with program shift)

; shutter-priority AE; aperture-priority AE; manual exposure

Exposure compensation

–2 EV – +2 EV in increments of



/



EV

Shutter speed

(combined

mechanical and electronic

shutter)

•

P

mode

:



/



sec. to



/



sec.

•

Bulb

: Max. 60 min.

•

Time

: 30 sec. to 2 sec.

•

All other modes

: 30 sec. to



/



sec.

112

Speci cations

System

Continuous

Approximately 6 or 3 fps

Focus

•

Mode

: Single or continuous AF; manual focus with focus ring

•

Focus-area selection

: Multi, area with focus area size selection; 49 (7 × 7) areas available in electronic viewﬁ nder

and LCD monitor, 25 (5 × 5) areas available in optical viewﬁ nder

•

Autofocus system

: Contrast-detect TTL AF with AF-assist illuminator

White balance

Custom, color temperature selection, auto, direct sunlight, shade, daylight ﬂ uorescent, warm white ﬂ uorescent,

cool white ﬂ uorescent, incandescent, underwater

Self-timer

Oﬀ , 2 sec., 10 sec.

Flash

Accessory shoe with TTL contacts and sync contact (X contact) that supports sync speeds as fast as



/



s

Mode

Auto, ﬁ ll ﬂ ash, oﬀ , rear-curtain sync, slow sync

(red-eye removal o )

; auto with red-eye removal, ﬁ ll ﬂ ash with red-eye

removal, oﬀ , rear-curtain sync with red-eye removal, slow sync with red-eye removal

(red-eye removal on)

Hybrid view nder

•

Optical view nder

: Reverse Galilean viewﬁ nder with electronic bright frame display and approx. 0.37×/0.6× mag-

niﬁ cation; frame coverage approx. 90%

•

Electronic view nder

: 0.47-in., 1,440k-dot color LCD viewﬁ nder; eye point approx. 14 mm; frame coverage approx.

100%

LCD monitor

3.0-in./7.6 cm, 1,230k-dot RGBW (red, green, blue, and white) color LCD monitor; frame coverage approx. 100%

Movies

i

(1,920 × 1,080)/

h

(1,280 × 720); 24 fps; stereo sound; maximum length 29 minutes

Input/output terminals

HDMI output

HDMI mini connector

Digital input/output

USB 2.0 High-Speed

113

Appendix

Speci cations

Power supply/other

Power supply

NP-W126 rechargeable battery

Battery life

(approximate

number of frames that can

be taken with a fully-charged

battery)

Battery type

Approximate number of frames

NP-W126

(type supplied with camera)

300

CIPA standard, measured using battery supplied with camera and SD memory card.

Note

: Number of shots that can be taken with battery varies with battery charge level and will decline at low

temperatures.

Camera size

(W × H × D)

139.5 mm × 81.8 mm × 42.5 mm (

34.1 mm excluding projections, measured at thinnest part

)/5.5 in. × 3.2 in. × 1.7 in. (1.3 in.)

Camera weight

Approx. 400 g/14.1 oz., excluding battery, accessories, and memory card

Shooting weight

Approx. 450 g/15.9 oz., including battery and memory card

Operating conditions

•

Temperature

: 0 °C to +40 °C/+32 °F to +104 °F

•

Humidity

: 10% – 80%

(no condensation)

114

Speci cations

NP-W126 rechargeable battery

Nominal voltage

7.2 V DC

Nominal capacity

1,260 mAh

Operating temperature

0 °C to +40 °C/+32 °F to +104 °F

Dimensions

(W × H × D)

36.4 mm × 47.1 mm × 15.7 mm/1.4 in. × 1.9 in. × 0.6 in.

Weight

Approx. 47 g/1.7 oz.

BC-W126 battery charger

Rated input

100 V – 240 V AC, 50/60 Hz

Input capacity

13 –21 VA

Rated output

8.4 V DC, 0.6 A

Supported batteries

NP-W126 rechargeable batteries

Charging time

Approx. 150 minutes (+20 °C/+68 °F)

Operating temperature

5 °C to +40 °C/+41 °F to +104 °F

Dimensions

(W × H × D)

65 mm × 91.5 mm × 28 mm/2.5 in. × 3.6 in. × 1.1 in., excluding projections

Weight

Approx. 77 g/2.7 oz., excluding battery

Weight and dimensions vary with the country or region of sale. Labels, menus, and other displays may di er from those on the

actual camera.

115

Appendix

Speci cations

■

Notices

• Speci cations subject to change without notice; for the latest information, visit http://www.fujifilm.com/products/

digital_cameras/index.html. FUJIFILM shall not be held liable for damages resulting from errors in this manual.

• Although the electronic view nder and LCD monitor are manufactured using advanced high-precision technol-

ogy, small bright points and anomalous colors may appear, particularly in the vicinity of text. This is normal for

this type of LCD display and does not indicate a malfunction; images recorded with the camera are una ected.

• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric  elds, static electricity,

or line noise).

• Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.

116

Restrictions on Camera Settings

The options available in each shooting mode are listed below.

Option

P

S

A

M

n

r

F

(macro mode)

OFF

✔

1

✔

1

F

✔

N

( ash

mode)

B

OFF

AUTO

✔

7

N

✔

7

O

✔

7

l

✔

7

P

✔

7

B

ON

K

✔

7

L

✔

7

M

✔

7

d

✔

7

P

✔

7

WB

(white balance)

✔

I

(continuous)

6 fps

✔

3 fps

✔

Bracketing

O

✔

W

✔

X

✔

Y

✔

Metering

o

✔

2

✔

2

p

✔

q

✔

Focus mode

C

✔

S

✔

3

M

✔

Exposure compensation

✔

7

✔

Option

P

S

A

M

n

r

F

N

ISO

H (25600)

✔

H (12800)

✔

6400

✔

5000

✔

4000

✔

3200

✔

2500

✔

2000

✔

1600

✔

800

✔

640

✔

500

✔

400

✔

200

✔

L (100)

✔

AUTO (3200)

✔

AUTO (1600)

✔

AUTO (800)

✔

AUTO (400)

✔

O

IMAGE SIZE

O

✔

P

✔

Q

✔

4

T

IMAGE

QUALITY

FINE

✔

NORMAL

✔

FINE+RAW

✔

NORMAL+RAW

✔

RAW

✔

117

Appendix

Restrictions on Camera Settings

Option

P

S

A

M

n

r

F

U

DYNAMIC

RANGE

AUTO

✔

7

✔

A

✔

B

✔

C

✔

P

FILM SIMU-

LATION

c

✔

d

✔

e

✔

b

✔

e

✔

d

✔

f

✔

f

✔

B

SELF-TIMER

✔

f

COLOR

✔

q

SHARPNESS

✔

r

HIGHLIGHT TONE

✔

s

SHADOW TONE

✔

h

NOISE REDUCTION

✔

K

LONG EXPOSURE NR

✔

F

AF MODE

s

✔

5

t

✔

5

u

SELECT CUSTOM SETTING

✔

K

EDIT/SAVE CUSTOM SETTING

✔

Option

P

S

A

M

n

r

F

v

DISP.

CUSTOM

SETTING

FRAMING

GUIDLINE

✔

ELECTRONIC

LEVEL

✔

AF DISTANCE

INDICATOR

✔

MF DISTANCE

INDICATOR

✔

HISTOGRAM

✔

APERTURE/

S-SPEED/ISO

✔

EXP. COMPENSA-

TION

✔

PHOTOMETRY

✔

FLASH

✔

WHITE BALANCE

✔

FILM SIMULATION

✔

DYNAMIC RANGE

✔

FRAMES REMAIN-

ING

✔

BATTERY LEVEL

✔

IMAGE SIZE/

QUALITY

✔

118

Restrictions on Camera Settings

Option

P

S

A

M

n

r

F

p

FLASH MODE

✔

I

FLASH

✔

C

AF ILLUMINATOR

✔

B

RED EYE REMOVAL

✔

I

FOCUS RING

✔

U

POWER SAVE MODE

✔

H

QUICK START MODE

✔

J

COLOR SPACE

✔

6

1 Fixed at OFF.

2 Fixed at o (multi).

3 Continuous AF is used when S is selected for focus mode.

4 Fixed at Q.

5 Center focus area selected automatically.

6 Automatically optimized for selected shooting mode.

7 Options available vary with shooting mode.

119

Memo

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN

http://www.fujifilm.com/products/digital_cameras/index.html

Fuji X-Pro1 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Fuji X-Pro1

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info

Fuji X-Pro1 Handleiding

Hulp nodig? Stel uw vraag in het forum

Forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Fuji X-Pro1

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info